Bose Bass Module 700
About Bose
Bose is a company that designs and manufactures audio equipment, including speakers, headphones, and home theater systems. The company was founded in 1964 by Dr. Amar G. Bose, an MIT professor, and audio engineer. Bose is known for its high-quality sound systems and innovative technology. The company also sells automotive sound systems, professional audio equipment, and noise-canceling technology.
WHAT’S IN THE CARTON
Confirm that the following parts are included:
- Bose Bass Module 700
- Power cord*
*May ship with multiple power cords. Use the power cord for your region.
NOTE: If any part of the product is damaged or if the glass on the bass module is broken, do NOT use it. Contact your authorized Bose dealer or Bose customer service.
Visit: worldwide.Bose.com/Support
BASS MODULE PLACEMENT
RECOMMENDATIONS
For best performance, follow these recommendations when placing the bass module:
- Do NOT place any objects on top of the bass module.
- To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 –0.9 m) away from the bass module. Place the bass module outside and away from metal cabinets, other audio/video components, and direct heat sources.
- Place the bass module on a stable and level surface. Vibration can cause the bass module to move, particularly on smooth surfaces like marble, glass or highly polished wood.
- Place the bass module along the same wall as your TV, or along any other wall in the front third of the room.
- Keep the front side of the bass module (the side opposite the POWER connector) at least 3 in. (7.6 cm) from any other surface. Blocking the port on the bottom of this side may affect acoustic performance.
- For more bass, place the bass module closer to the walls and corners. For less bass, place the bass module further from walls and corners.
- Make sure there is an AC (mains) outlet nearby.
CAUTION: Do NOT place the bass module on its top or sides when in use.
Placing a second bass module
Try placing each bass module in multiple locations to see what sounds best for your listening area. After placing a module in a new location, run ADAPTiQ audio calibration using the instructions in your soundbar owner’s guide (see page 24). For more
bass, place the modules closer to each other or closer to walls and corners.
CONNECT THE BASS MODULE TO THE POWER
- Connect the power cord to the b connector on the bass module.
- 2. Plug the other end of the power cord into an AC (mains) power outlet.
CONNECT TO A SOUNDBAR OR SPEAKER
CHOOSE YOUR CONNECTION METHOD
The way you connect the bass module depends on your soundbar or speaker. Choose your connection method from the table below.
SOUNDBAR OR SPEAKER / CONNECTION METHOD
| Bose Smart Soundbar (voice-enabled soundbar) | Connect using the Bose Music app (see page 15).
NOTE: If you can’t access or have trouble connecting using the Bose Music app, see “Troubleshooting” on page 22. |
| SoundTouch 300 soundbar | Connect using your soundbar’s remote (see page 16). |
| Bose TV Speaker (or alternate wired setup for soundbars) | Connect using an audio cable (not provided) (see page 17). |
CONNECT USING THE BOSE MUSIC APP
- In the Bose Music app, select your soundbar.
- Go to the Settings menu to add your bass module.
New to the Bose Music app?
- On your mobile device, download the Bose Music app.
- Follow the app instructions.
CONNECT USING THE SOUNDTOUCH 300 REMOTE
- On the SoundTouch 300 remote, press the SoundTouch button e.
- Press and hold k until the connectivity light l on the soundbar blinks white.
Once connected, you hear a tone. The light on the back of the bass module and on the soundbar glow white.
NOTES: Connecting may take several minutes. If the bass module doesn’t connect to the soundbar, see “Troubleshooting” on page 22.
Check for sound
NOTE: To avoid hearing distorted audio, turn off your TV speakers. Refer to your TV owner’s guide for more information.
- Power on your TV.
- If you are using a cable/satellite box or another secondary source:
- Power on this source.
- If this source is connected to your TV, select the appropriate TV input.
- Power on the soundbar. You hear sound coming from the bass module.
NOTE: If you do not hear sound from the bass module, see “Troubleshooting” on page 22.
CONNECT USING AN AUDIO CABLE
You can connect the module to the soundbar or speaker using a 3.5 mm audio cable (not provided). If you don’t have a 3.5 mm audio cable (commonly used for headphones and mobile devices), visit Bose.com/BM7/BM70000 to purchase a 15 ft. (4.5 m) cable. You can also purchase this part at your local electronics store.
- Connect one end of a 3.5 mm audio cable to the x connector on the bass module.
- Connect the other end of the cable to the h connector on the back of the soundbar or speaker.
NOTES:
- Bose Smart Soundbar: Make sure to connect the cable to the h connector, not the C connector.
- Bose TV Speaker: Make sure to connect the cable to the h connector, not the B connector.
- SoundTouch 300 soundbar: Connect the cable to the p connector.
CONNECT A SECOND BASS MODULE (OPTIONAL)
Connecting a second bass module may produce more consistent or powerful bass throughout your listening area.
NOTES: For more information about placing a second bass module, see page 12. If your current bass module is connected to your soundbar or system with a 3.5 mm audio cable (see page 17), you can’t connect a second bass module.
Compatible bass modules
You can connect a Bose Bass Module 700 or an Acoustimass 300 bass module as a second bass module. Connect to a Bose Smart Soundbar or
SoundTouch 300 soundbar
Choose the connection method that’s appropriate for your soundbar (see page 14). Connect to a Lifestyle 650/600 home entertainment system
- On the Lifestyle 650/600 remote, press SETUP.
- From the UNIFY menu, select Speaker Management, then select Setup Second Bass Module.
- Follow the on-screen instructions to connect your second bass module.
BASS MODULE STATUS
STATUS LIGHT
The light on the back of the module shows the system status.
LIGHT ACTIVITY / SYSTEM STATE
| Solid white | Connected to the soundbar or speaker |
| Blinking white | Downloading a software update |
| Solid amber | Network standby (wireless connection) |
| Blinking amber | Ready to connect to the soundbar or speaker |
| Off | Power-saving mode (wired connection) |
| Blinking red | Error – contact Bose customer service |
CARE AND MAINTENANCE
CLEAN THE BASS MODULE
Clean the exterior of the bass module with a soft, dry cloth.
CAUTIONS:
- Do NOT allow liquids to spill onto the bass module or into any openings. Do NOT use any sprays near the bass module.
- Do NOT use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives.
- Do NOT allow objects to drop into any openings.
REPLACEMENT PARTS AND ACCESSORIES
Replacement parts and accessories can be ordered through Bose customer service.
Visit: worldwide.Bose.com/Support
LIMITED WARRANTY
Your bass module is covered by a limited warranty. VVisit: worldwide.Bose.com/Support for details of the limited warranty. To register your product, Visit: worldwide.Bose.com/Support Failure to register will not affect your limited warranty rights.
TROUBLESHOOTING
TRY THESE SOLUTIONS FIRST
If you experience problems with the bass module:
- Unplug the power cords for the bass module and soundbar or speaker, wait 30 seconds and plug them firmly into a live AC (mains) outlet. Secure all cables.
- Check the bass module status (see page 20).
- Move the bass module and soundbar or speaker away from possible interference (wireless routers, cordless phones, televisions, microwaves, etc.).
- Move the bass module within the recommended range of your wireless router or mobile device for proper operation.
- Place the bass module according to the placement guidelines (see page 11).
OTHER SOLUTIONS
If you could not resolve your issue, see the table below to identify symptoms and solutions to common problems. If you are unable to resolve your issue, contact Bose customer service.
SYMPTOM / SOLUTION
| Bose Music app doesn’t work on mobile device | Make sure your mobile device is compatible with the Bose Music app and meets minimum system requirements. For more information, refer to the app store on your mobile device. |
| Confirm that the status light is blinking amber, indicating that the bass module is ready to connect (see page 20). | |
| Repeat the connection process (page 14). | |
| Bass module doesn’t wirelessly connect to
the soundbar |
Unplug the power cords for the bass module and soundbar, wait 30 seconds and plug them firmly into a live AC (mains) outlet.
Connect the bass module to the soundbar using a 3.5 mm audio cable (see page 17). |
| NOTE: If you don’t have a 3.5 mm audio cable (commonly used for headphones and mobile devices), visit Bose.com/BM700 to purchase a 15 ft. (4.5 m) cable. You can also purchase this part at your local electronics store. |
|
Intermittent or no audio |
Unmute the system. Increase the volume.
Confirm that the soundbar or speaker is playing audio. If not, refer to your soundbar or speaker owner’s guide for troubleshooting (see page 24). Test different sources (if available). Make sure that you’re playing audio that has bass frequencies, such as music or movies. For wireless connections: Confirm that the system status light is glowing solid white, indicating that the bass module is connected to the soundbar (see page 20). Repeat the connection process (see page 14). Place the bass module according to the placement guidelines (see page 11). |
|
Poor or distorted sound from bass module |
Test different sources (if available).
Place the bass module according to the placement guidelines (see page 11). Remove all protective films from the bass module. If the bass module is connected to a Bose Smart Soundbar or SoundTouch 300 soundbar, run ADAPTiQ audio calibration. For more information, refer to your soundbar owner’s guide (see page 24). NOTES: This solution does not apply to the Bose Smart Soundbar 300. If you no longer have the ADAPTiQ headset (provided with your soundbar), contact Bose customer service for a replacement. If the bass module is connected to a Bose TV Speaker or Bose Smart Soundbar 300, make sure the 3.5 mm audio cable (not provided) is connected to the h connector on the back of the speaker or soundbar, not the B or C connector. |
|
Bass is too heavy or low |
Adjust the bass. For instructions, refer to your soundbar or speaker owner’s guide (see page 24).
If the bass module is connected to a Bose Smart Soundbar or SoundTouch 300 soundbar, run ADAPTiQ audio calibration. For more information, refer to your soundbar owner’s guide (see page 23). NOTES: This solution does not apply to the Bose Smart Soundbar 300. If you no longer have the ADAPTiQ headset (provided with your soundbar), contact Bose customer service for a replacement. Place the bass module according to the placement guidelines (see page 11). |
REFERENCE
ACCESS YOUR SOUNDBAR OR SPEAKER OWNER’S GUIDE
For instructions and troubleshooting specific to your soundbar or speaker, refer to your soundbar or speaker owner’s guide. Visit:
Bose Smart Soundbar: worldwide.Bose.com/Support
Bose TV Speaker: worldwide.Bose.com/Support/TVS
SoundTouch 300 soundbar: global.Bose.com/Support/ST300
FAQs for Bose Bass Module 700 User Guide
Can you use a soundbar without a Bose bass module?
No. Only the Bose Smart Soundbar 600, Bose Smart Soundbar 900, Bose Smart Soundbar 300, Bose TV Speaker, Bose Smart Soundbar 700, Bose Soundbar 500, and the SoundTouch 300 soundbar can be upgraded with the Bose Bass Module 700.
How many Bose bass modules can I use?
One or two bass modules can be connected to your system. Both must be the same model and wirelessly connected in order to connect two. Even if your soundbar’s Wi-Fi and Bluetooth® are turned off, you can still connect a bass module to it.
Can the bass on a Bose 700 be changed?
Tap the Audio button on the Bose Music app. choose the chosen product from the menu in the upper-left corner. Tap the + or – buttons to change the bass or treble levels in steps of 10 under the Soundbar section (from -100 to 100).
Any subwoofer can be connected to the Bose 700?
corresponding bass modules As a second bass module, you can attach a Bose Bass Module 700 or an Acoustimass 300 bass module.
What causes the popping sound in my Bose 700 subwoofer?
Interference from nearby Bluetooth or WiFi devices might produce a popping sound. This can be avoided by shifting the position away from the bass module or by connecting the module to the soundbar with an AUX wire.
On a Bose, can the bass be increased?
To change the volume of the bass or treble your product produces: Tap the Audio button on the Bose Music app. choose the chosen product from the menu in the upper-left corner.
What wattage does a Bose subwoofer have?
The Bose® F1 Subwoofer has 1,000 watts of power and offers all the performance of a larger bass box in a smaller, easier-to-transport design that fits in a car.
How can I make my Bose bass module’s bass louder?
Tap the Audio button on the Bose Music app. choose the chosen product from the menu in the upper-left corner. Tap the + or – buttons to change the bass or treble levels in steps of 10 under the Soundbar section (from -100 to 100).
Why is the bass module in my Bose popping?
Look for potential wireless interference sources. Try disconnecting a device’s power cord or turning off its Wi-Fi to see if that fixes the issue. If removing a specific device fixes the problem, try moving that device as far away from your product as you can.
How can my Bose 700 be made louder?
The touch volume control on the right ear cup of the headphones must be used if the user wants a louder listening level than what the app permits (when grouped).
Pdf – Bose Bass Module 700 User Guide
For more manuals by Bose, Visit:
- Bose SoundLink Flex Bluetooth speaker User Guide
- Bose SoundLink Flex Bluetooth speaker bundle User Manual
- Bose Noise Cancelling Headphones 700 User Manual
- Bose Music Amplifier User Guide
- Bose Companion 2 Series III multimedia speaker system User Manual
For More Manuals Visit:
- ManualsDock
- EDIFIER Powered Bluetooth Speaker Brown Wood User Manual
- Onkyo SKH-410 Home Audio Speaker System User Manual