Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

EDIFIER Powered Bluetooth Speaker Brown Wood User Manual

EDIFIER Powered Bluetooth Speaker Brown Wood Featured


EDIFIER Powered Bluetooth Speaker Brown Wood

EDIFIER Powered Bluetooth Speaker Brown Wood Product

About Edifier

Edifier specializes in creating high-end audio products that are both technologically advanced and beautifully crafted. Edifier, a company with its headquarters in Beijing, China, was founded in 1996 and offers a variety of home audio, professional audio, vehicle audio, headphones, and microphones for both personal entertainment and business use. In February 2010, Edifier joined the Chinese stock exchange and became the first company listed in the Chinese audio market. In 2010, Edifier was considered the sole Chinese corporation implementing a national trademark strategy.

Important safety instruction

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Thank you for purchasing Edifier R1280DB multimedia speakers. Please read this manual carefully before operating this system.

The lightning flash with arrowhead inside the triangle is intended to alert the user to the presence of an un-insulated dangerous voltage within the product’s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION RISK OF ELECTRIC SHOCK NO NOT OPEN To prevent the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified Service personnel only.

The exclamation point inside the triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

  1. Read these instructions.
  2. Keep your user manual.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not use this apparatus near water and never put this apparatus into liquids or allow liquids to drip or spill onto it.
  8. Do not place appliances filled with water on this apparatus, such as vases; nor place any form of open fire such as a lit candle.
  9. Do not block any ventilation openings. Please leave enough space around the speakers to ensure good ventilation (the distance should be above 5cm). Install by the manufacturer’s instructions.
  10. Do not place near any heat sources such as a radiator, heat register, stove, or other apparatus (including an amplifier) that produces heat.
  11. Do not disregard the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the outlet.
  12. Protect the power cord from damage or getting pinched particularly at plugs, receptacles, and the point where they exit from the apparatus.
  13. Only use attachments/accessories specified by the manufacturer.
  14. Unplug this apparatus during lightning storms or when unused for long periods.
  15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus is damaged, such as a power supply cord or plug, liquid spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  16. The MAIN plug is used as the disconnecting device, the disconnecting device shall remain readily operable.
  17. The Maximum ambient temperature is 45°C / 113°F
  18. Do not use strong acids, strong alkalis,s, and other chemical solvents to clean the product surface. Please use a neutral solvent or water to clean the product.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children, if the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of your body, seek immediate medical attention. The battery (in the remote control) shall not be exposed to excessive heat such as sunshine, fire, or the like.

In The Box

EDIFIER Powered Bluetooth Speaker Brown Wood (1)

Box Contents

EDIFIER Powered Bluetooth Speaker Brown Wood (2)

Speaker Controls

EDIFIER Powered Bluetooth Speaker Brown Wood (3)

EDIFIER Powered Bluetooth Speaker Brown Wood (4)

  1. Infrared receiver
  2. Treble dial
  3. Bass dial
  4. Master volume control/ input selection
    Press in to navigate between audio sources: LINE1-
    > LINE2->Optical->Coaxial->Bluetooth.
    Note: Press and hold the master volume control to enter into standby mode.
  5. Power indicator Red: optical/coaxial inputs Blue: Bluetooth input Green: Line in1/Line in2 inputs
  6. Speaker output
  7. Power switch
  8. Power cord
  9. Line in input port
  10. Line in2 input port
  11. Optical input port
  12. Coaxial input port

Remote Control

EDIFIER Powered Bluetooth Speaker Brown Wood (5)

  1. Power ON/OFF
  2. Mute
  3. Volume decrease
  4. Volume increase
  5. Line in input
  6. Line in2 input
  7. Optical input
  8. Coaxial input
  9. Bluetooth input (Press and hold to disconnect Bluetooth devices)
  10. Pause/play (for Bluetooth only)
  11. Previous track (for Bluetooth only)
  12. Next track (for Bluetooth only)

Battery loading: Please refer to the illustration to open the battery compartment, insert the CR 2025 battery and close the compartment

EDIFIER Powered Bluetooth Speaker Brown Wood (6)


  1. Do not place the remote control in places that are hot and humid.
  2. Do not charge the batteries.
  3. Remove the batteries when unused for a long time.
  4. The battery should not be exposed to excessive heat such as direct sun, fire, or similar.
  5. The a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.


EDIFIER Powered Bluetooth Speaker Brown Wood (7)

  1. Connect the speakers with the included speaker connecting cable
  2. Connect to a power source, power on the speaker, then the indicator is lit.


EDIFIER Powered Bluetooth Speaker Brown Wood (8)

  1. Press the master volume control on the active speaker or press the “LINE 1 /LINE2” button on the remote control to select LINE IN input. The indicator turns green.
  2. Using an audio cable to connect the audio source to the speaker.
  3. Play from your device and adjust the volume accordingly.

Optical and Coaxial Input

EDIFIER Powered Bluetooth Speaker Brown Wood (9)

  1. Press the master volume control on the active speaker or press the “OPT/COX” button on the remote control to select the optical/coaxial input. The indicator turns red.
  2. Use optical or coaxial cable (optical cable included) to connect audio sources to your speaker.
  3. Play from your devices and adjust the volume accordingly.


  1. Only PCM signals with 44.1 KHz/48KHz can be decoded in optical and coaxial modes.

Bluetooth Input

EDIFIER Powered Bluetooth Speaker Brown Wood (10)


  1. Turn on the speaker and switch to Bluetooth mode by pressing the Bluetooth button on the remote control or pressing the master volume control on the back panel of the active speaker. The indicator turns blue.
  2. Go to the setup section on your source devices (mobile phones, tablets, etc.) and search for nearby Bluetooth devices, you will find “EDIFIER R1280DB” in the list.
  3. Pair your device with “EDIFIER R1280DB”.
  4. Play audio tracks on your device and adjust the volume to a desired level.
  5. To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.


  1. Bluetooth connectivity and compatibility may be different among different source devices, depending on the software versions of source devices.
  2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports A2DP and AVRCP profile.
  3. PIN code for connection is “0000” if needed.


  • Power output: L/R: 21W+21W
  • Signal to noise ratio dB(A): L/R: 85dB (A)
  • Noise level: ≤25dB(A)
  • Input sensitivity: LINE IN1: R/L:450±50mV, LINE IN2: R/L:550±50mV, OPT/COA R/L: 500±50mFFS, Bluetooth: R/L:700±50mFFS
  • Frequency response:  55Hz-20KHz
  • Bass unit: 4 inches (116mm)
  • Tweeter unit: Ø 13mm silk dome tweeter


Problem Solution
No sound •Check if the power indicator light is ON
•Try to turn up the volume using either the master volume control or the remote control.
•Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
•Check if there is a signal output from the audio source.
Cannot connect via Bluetooth •Make sure the speaker is switched to Bluetooth input, in another audio input mode Bluetooth can not be paired or connected.
Disconnect from any Bluetooth device by pressing and holding the volume dial in Bluetooth mode, then trying again.
•Effective Bluetooth transmission range is 10 meters, please make sure the operation is within the range.
•Try another Bluetooth device for connection.
The R1280DB does not turn on •Check if the mains power is connected. or if the wall outlet is switched on.

If you want to find out more about ECIFIER, please visit our website at www.edifier.com For Edder warranty queries, please visit the relevant country page on our www.edtlier.com and review the section Warranty Terms. USA and Canada: service@edifier.ca
South Arnedca: Please visit *www.edifier.com

Manual Edition 1.1 Nov. 2016 IB-200-R1280D-01 Suit 2207, 22nd floor, Tower II, Lippo center, 89 Queensway Hong Kong

Tel: +852 2522 6989
Fax: +852 2522 1989

www.edifier.com © 2016 Edifier International Limited. All rights reserved. Printed in China

NOTICE: For the need for technical improvement and system upgrade, the information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product. If any difference is found, the actual product prevails.

FAQs EDIFIER Powered Bluetooth Speaker

Why does one of my Edifier speakers only function?

This problem is typically brought on by a turntable tracking problem. Reverse the RCA jacks on the control speaker from red to white and from white to red to determine if the problem is with the turntable or the speakers. The turntable is at fault if the problem now manifests on the opposite speaker.

How should my Edifier speakers be installed?

Slide the Bluetooth icon to the right to turn on both your speaker and Bluetooth on your device. The Edifier speaker can be found by selecting “search for devices.” In order to have the option to connect, touch and hold the speaker’s name. Choose it and enjoy the crystal-clear sound.

Why won’t my speakers from Edifier work?

Consider returning the Bluetooth chip to its default settings. To allow the capacitors to completely discharge, kindly disconnect the speakers for at least ten minutes. Reconnect the speakers’ power, choose Bluetooth as the input method, then pair your device with the speakers.

What should I do if my left speaker is broken?

Make sure the stereo system’s speaker balance is in the center position. Make sure the speaker wire is properly attached to the audio system’s rear. The speaker cable should be changed if the problem persists. Remove the speaker connectors from the stereo system if the problem is still not fixed.

Has Edifier ever had an app?

From the links below, download the EDIFIER Connect APP for iOS or Android.

How can I deactivate my Edifier speakers?

The speakers can be turned ON/OFF by briefly holding down the power button. Helpful?

Why is there no sound from my speaker?

sound settings to check Make sure none of your audio equipment is muted or turned off. Open Volume Mixer can be chosen by selecting and holding (or right-clicking) the Speakers icon in the taskbar. Note: If the Speakers aren’t visible, they can be in the overflow area. To check, choose Show hidden icons.

How long is Edifier effective?

The Edifier TWS1 is comparable to other affordable wireless headphones in that they are composed of plastic, as is the case, and there aren’t many high-end features. The earbuds’ lightweight design and low-cost plastic construction make them comfortable to use for the duration of their seven-hour battery life.

What causes a speaker to malfunction?

As we just established, poor or faulty wiring and connections are the primary causes of most audio system-related problems. Incorrect settings on your TV, AV receiver, and speakers might potentially cause issues. Unbelievably, improper speaker placement can also cause some audio-related problems.

Without the remote, how can I switch on my Edifier speakers?

On the side of one of the speakers, there is an on/off switch. So, you may turn them off without a remote and adjust the volume.

For more manuals by Edifier, visit ManualsDock

Leave a Comment