Dreo DR-HTF003 Cruiser Pro Tower Fan User Manual

Dreo DR-HTF003 Cruiser Pro Tower Fan

About DREO
For those looking for the best performance in real-world scenarios, we designed Dreo. Every Dreo appliance is intended to provide a sense that is natural, energizing, and ultimately pleasant. Creating a comfortable atmosphere in your house that fosters enjoyable activities.

Introduction

The easy-to-touch smart design makes it more convenient to use, allowing you to easily customize your airflow and cooling needs for a child’s room, bedroom, or home office. Choose between 4 speeds, and 3 modes (Normal, Natural, or Sleep), and remotely control the strength and oscillation from your bed or sofa. With a perfect 90° oscillating cooling fan, you can focus airflow in the desired areas. More efficient airflow distribution throughout the space is provided by the wide-angle oscillation and lengthy wind curve. With a built-in timer that can be adjusted from one to twelve hours, this powerful yet silent floor fan will emit only 40dB of noise, which is low enough to not interfere with your sleep. This will allow you to get a nice night’s rest or take a cool nap on warm summer nights (the light turns auto-off after 30s in sleep mode)
Designed with a thin fence so as not to threaten children, a stable stand base that resists falling or tripping, and a fused safety plug that guard against damage from over-voltage and power surges, the bladeless oscillating fan is ETL-certified. Due to its compact base and body, the quiet standing fan can fit into any room corner and is portable for use in a house, RV, or workplace. It is also easy to transport thanks to the handy carry handle.

SAFETY WARNING

IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE

When using the fan, the following basic Instructions should always be followed to reduce the risk of fire, electric shock, and Injury to persons, including the following:

1. Read and save these instructions
2. This appliance has a polarized plug lone blade is wider than the other). To reduce the risk of electric shock. this plug is intended to fit in a polarized outlet only one way, If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
3. This unit should be placed on a smooth floor and the power cord can’t be close to heating appliances.
4. Please check the consumption voltage applied with this unit This unit’s consumption voltage is 120V AC, 60Hz.
5. Please don’t use such a power cord: too long, and damaged. Before use, the power cord can’t be pushed by force to avoid damage. And if the power cord is too long, it is easy to produce fire electric shock, and other.
6. Before assembly completes, please don’t use this unit
7. if don’t use it, please cut off the power cord and keep apart the power supply.
8. Please keep your hands dry when connecting the power supply.
9. Please don’t put your fingers, pencil, and other things into the grill when the blades are operating.
10. Unplug or disconnect the appliance from the power supply before cleaning.
11. Don’t let this unit immerse into water, oil, basically, acidity high-temperature conditions.
12. Please note not to cover by window curtain or others to avoid the blades draw them.
13. This unit doesn’t use the outdoors.
14. Please don’t use insecticide on the unit, or the resin and paint is easy to be damaged.
15. Please don’t use it directly for a long time when having little baby, patient, or an old man.
16. Store the fan in a clean dry place when not in use.
17. WARNING: Chemical Bum Hazard. Keep batteries away from children.
18. WARNING: To reduce the risk of fire or electric shock. Do not use this fan with any solid-state speed control device.

FOR HOUSEHOLD USE ONLY

READ AND SAVE THESE INSTRUCTIONS

PACKING DETAILS

• 1 x OREO Tower Fan Body
• 1 x Front Fan Base
• 1 x Rear Fan Base
• 4 x Thumbs Screws
• 1 x Remote Controller
• 1 x CR2025 Type Lithium Battery Installed In The Remote Controller)
• 1 x Use Guide
• 1 x Quick Start Guide

FUSED SAFETY PLUG – FOR US ONLY

This fan features a fused safety plug which is designed to cut off electric current into the fan if an electrical fault occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.

USER SERVICING INSTRUCTIONS

• If your fan loses power and you suspect that the fuse on your fan has blown, grasp the plug and remove it from the receptacle or another outlet device. Do not unplug by pulling on the cord.
• Slide fuse cover, located on the top of the plug, towards the prongs of the plug.
• carefully remove the blown fuse and snap a new fuse into place. Fully close the fuse door by sliding it back Into place. Discard the blown fuse. The plug should now be ready for normal use.
• Slide fuse cover, located on the top of the plug, towards the prongs of the plus.
• To Reduce the Risk of Fire, do not replace the attached plug. Contains a safety device! fuse) that should not be removed. Discard the product If the attached plug is damaged.
• If you need further information on how or when to replace the fuse in the safety plug, please contact Customer Service for support.

ASSEMBLY INSTRUCTIONS

• STEP 1 Do not operate the tower fan without the base. The tower fan base is composed of two pieces(Front Base and Rear base The base needs to be connected together prior to attaching it to the lathe tower fan Al<: Jn, and then insert, the plastic pegs of the BASE BACK with the holes on the BASE FRONT until both pieces snap together.
• STEP 2 Now that the base is connected together, add the screw and rotate It clockwise to secure the base.
• STEP 3 Gently press the wire into the clamps, Your tower fan Is row ready for use.

CONTROL PANEL/ REMOTE CONTROL

1. STYLE Wind Mode Control, Auto Mode Control.
2. SPEED Fan Speed Control.
3. POWER Power Control, LED Display Control.
4. TIMER 17mer Setup, Timer Running Status.
5. OSC Oscillation Control.
6. MUTE Beep On/ Off Control.

POWER Press POWER  to tum the fan on or off. The fan will restore to the speed of the most recent use.

REMARK: The timer and the auto feature will not be restored.

LED DISPLAY CONTROL  Press POWER for 3 seconds to turn the LED display on or off.

STYLE  Change the wind mode, NORMAL, NATURAL SLEEP.

NORMAL 4-speed levels.

NATIJRAL  4 speed levels. simulate a natural breeze controlled by a designed fan speed algorithm.

SLEEP 4-speed levels. Fan speed will decrease from the current setting every thirty minutes until it reaches speed level 1. And LED display will be off after 20 seconds.

AUTO FEATURE  Press and hold STYLE  for 2 seconds to turn the Automatic control feature on or off AUTO will be lighted accordingly.

WHEN AUTO FEATURE IS ON  Fan speed will adapt to the temperature of the surrounding environment.

SPEED Fan speed control.

OSC Turns the oscillation feature on or off.

TIMER Press TIMER  to set a timer or to display the timer running status while the timer Is working. The temperature will be displayed Instead of the timer after 20 seconds Turn off the timer, Press TIMER repeatedly and select OH, or Press POWER tum off the fan and turn it on again. Display timer running status, Press TIMER  to display the timer running status while the timer is working.

MUTE (REMOTE CONTROL)

Turn the beeping that occurs you press a button on or off and MUTE will be lighted accordingly.

SPECIFICATIONS

• MODEL: DR+ffF003
• RATED POWER: 55W
• INPUT: 1AC 120V60HZ

BATTERY REPLACEMENT

1. The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
2. Remove the battery holder by pressing the locking tab A with your thumb and pulling it out as per arrow B.
3. Replace the battery with the same type ICR2025 Type Lithium Battery), making sure the (+) side facing up.
4. Gently push in the holder until securely locked into place.

WARNING CHEMICAL BURN HAZARDS KEEP BATTERIES AWAY FROM CHILDREN.

This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment If the battery compartment does not close securely, stop using the product. remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

The cells shall be disposed of properly. including keeping them away from children: Even used cells may cause injury.

CLEANING AND STORAGE

• Ensure the fan is turned off and unplugged.
• Use only a soft cloth to gently wipe the outer surfaces of the fan clean. To clean between the grills and fan blade area, we recommend using a pipe cleaner, flexible dust wand, vacuum cleaner, or compressed air to gently remove the dust.
• To clean the rear grill use a soft dry cloth.
• DO NOT Immerse the fan In water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan. For storage, you may leave the fan assembled and covered to protect it from dust.
• Store the fan in a cool, dry place.

FAQs Dreo DR-HTF003 Cruiser Pro Tower Fan

Pdf – Dreo DR-HTF003 Cruiser Pro Tower Fan User Manual

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/05/Dreo-DR-HTF003-Cruiser-Pro-Tower-Fan.pdf” download=”all”]

For More Manuals Visit: ManualsDock

• Dreo DR-HTF003 Cruiser Pro Tower Fan User Manual

• Dreo DR-HSH002 Space Heaters for Indoor Operational Guide

• DREO PTC DR-HSH001 Fan Heater User Guide

• DREO DR-HSH005 1500W Electric Portable Space Oil Filled Heater User Guide