ASUS AC1750 WiFi Dual Band Wireless Internet Router
About ASUS
ASUS is a multinational technology company based in Taiwan. It was founded in 1989 by Ted Hsu, M.T. Liao, Wayne Hsieh, and T.H. Tung, with a focus on producing computer motherboards. Over the years, ASUS has grown to become one of the world’s leading manufacturers of computer hardware, electronics, and networking equipment.
ASUS offers a wide range of products, including laptops, desktops, tablets, smartphones, motherboards, graphics cards, monitors, networking devices, and peripherals. They cater to various markets, including consumers, businesses, and gamers, with products that emphasize performance, innovation, and reliability.
ASUS is a multinational technology company based in Taiwan. It was founded in 1989 by Ted Hsu, M.T. Liao, Wayne Hsieh, and T.H. Tung, with a focus on producing computer motherboards. Over the years, ASUS has grown to become one of the world’s leading manufacturers of computer hardware, electronics, and networking equipment.
ASUS offers a wide range of products, including laptops, desktops, tablets, smartphones, motherboards, graphics cards, monitors, networking devices, and peripherals. They cater to various markets, including consumers, businesses, and gamers, with products that emphasize performance, innovation, and reliability.
Copyright © 2019 ASUSTeK Computer Inc. All Rights Reserved.
No part of this Asus Wifi Router Instructions Manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this Asus Wifi Router Instructions Manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Package contents
- ASUS Wireless Router
- Power adapter
- Warranty card
- Network cable (RJ-45)
- Quick Start Guide
NOTES:
- If any of the items are damaged or missing, contact ASUS for technical inquiries and support, Refer to the ASUS Support Hotline list at the back of this user manual.
- Keep the original packaging material in case you would need future warranty services such as repair or replacement.
Your wireless router
- USB 3.0 port
Insert a USB 3.0 device such as USB hard disks or USB flash drives into this port. - LAN LED
- Off: No power or no physical connection.
- On: Has physical connection to a local area network (LAN).
- Flashing: Transmitting or receiving data via wireless connection.
- WAN LED
- Off: No power or no physical connection.
- On: Has physical connection to a wide area network (WAN).
- Flashing: Transmitting or receiving data via wireless connection.
- 2.4GHz LED / 5GHz LED
- Off: No 2.4GHz or 5GHz signal.
- On: Wireless system is ready.
- Flashing: Transmitting or receiving data via wireless connection.
- Power LED
- Off: No power.
- On: Device is ready.
- Flashing slow: Rescue mode
- Flashing quick: WPS is processing.
- Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a power source. - Power button
Press this button to power on or off the system. - USB 2.0 port
Insert a USB 2.0 device such as a USB hard disk or USB flash drive into this port. Insert your iPad’s USB cable into one of these ports to charge your iPad. - Reset button
This button resets or restores the system to its factory default settings. - WAN (Internet) port
Connect a network cable into this port to establish WAN connection. - LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection. - WPS button
This button launches the WPS Wizard.
NOTES:
Use only the adapter that came with your package. Using other adapters may damage the device.
Specifications
Positioning your router
For the best wireless signal transmission between the wireless router and the network devices connected to it, ensure that you:
- Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
- Keep the device away from metal obstructions and away from direct sunlight.
- To prevent signal interference or loss, keep the device away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment.
- To ensure the best wireless signal, orient the three detachable antennas as shown in the drawing below.
Setup Requirements
To set up your wireless network, you need a computer that meets the following system requirements:
- Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX/ 1000BaseTX)
- IEEE 802.11a/b/g/n/ac wireless capability
- An installed TCP/IP service
- Web browsers such as Internet Explorer, Firefox, Safari, or Google Chrome
NOTES:
- If your computer does not have built-in wireless capabilities, you may install an IEEE 802.11a/b/g/n/ac WLAN adapter to your computer to connect to the network.
- With its dual-band technology, your wireless router simultaneously supports 2.4GHz and 5GHz wireless signals. This allows you to do Internet-related activities such as Internet surfing or reading/writing e-mail messages using the 2.4GHz band while simultaneously streaming high-definition audio/video files such as movies or music using the 5GHz band.
- Some IEEE 802.11n devices that you want to connect to your network may or may not support a 5GHz band. Refer to the device’s manual for specifications.
- The Ethernet RJ-45 cables that will be used to connect the network devices should not exceed 100 meters.
Router Setup
IMPORTANT!
- Use a wired connection when setting up your wireless router to avoid possible setup problems.
- Before setting up your ASUS wireless router, do the following:
- If you are replacing an existing router, disconnect it from your network.
- Disconnect the cables/wires from your existing modem setup. If your modem has a backup battery, remove it as well.
- Reboot your cable modem and computer (recommended).
Wired connection
NOTE: You can use either a straight-through cable or a crossover cable for wired connection.
To set up your wireless router via wired connection:
- Insert your wireless router’s AC adapter to the DC-IN port and plug it to a power outlet.
- Using the bundled network cable, connect your computer to your wireless router’s LAN port.
IMPORTANT! Ensure that the LAN LED is blinking. - Using another network cable, connect your modem to your wireless router’s WAN port.
- Insert your modem’s AC adapter to the DC-IN port and plug it to a power outlet.
Wireless connection
To set up your wireless router via wireless connection:
- Insert your wireless router’s AC adapter to the DC-IN port and plug it to a power outlet.
- Using the bundled network cable, connect your modem to your wireless router’s WAN port.
- Insert your modem’s AC adapter to the DC-IN port and plug it to a power outlet.
- Install an IEEE 802.11a/b/g/n/ac WLAN adapter on your computer.
NOTES:
- For details on connecting to a wireless network, refer to the WLAN adapter’s user manual.
- To set up the security settings for your network, refer to the section Setting up the wireless security settings in Chapter 3 of this user manual.
Troubleshooting
This chapter provides solutions for issues you may encounter with your router. If you encounter problems that are not mentioned in this chapter, visit the ASUS support site at: https://www.asus.com/support/ for more product information and contact details of ASUS Technical Support.
Basic Troubleshooting
If you are having problems with your router, try these basic steps in this section before looking for further solutions.
Upgrade Firmware to the latest version.
- Launch the Web GUI. Go to Advanced Settings > Administration > Firmware Upgrade tab. Click Check to verify if the latest firmware is available.
- If the latest firmware is available, visit the ASUS global website at https://www.asus.com/support/ to download the latest firmware.
- From the Firmware Upgrade page, click Browse to locate the firmware file.
- Click Upload to upgrade the firmware.
Restart your network in the following sequence:
- Turn off the modem.
- Unplug the modem.
- Turn off the router and computers.
- Plug in the modem.
- Turn on the modem and then wait for 2 minutes.
- Turn on the router and then wait for 2 minutes.
- Turn on computers.
Check if your Ethernet cables are plugged properly.
- When the Ethernet cable connecting the router with the modem is plugged in properly, the WAN LED will be on.
- When the Ethernet cable connecting your powered-on computer with the router is plugged in properly, the corresponding LAN LED will be on.
Check if the wireless setting on your computer matches that of your computer.
- When you connect your computer to the router wirelessly, ensure that the SSID (wireless network name), encryption mehtod, and password are correct.
Check if your network settings are correct.
- Each client on the network should have a valid IP address. ASUS recommends that you use the wireless router’s DHCP server to assign IP addresses to computers on your network.
- Some cable modem service providers require you to use the MAC address of the computer initially registered on the account. You can view the MAC address in the web GUI, Network Map > Clients page, and hover the mouse pointer over your device in Client Status.
FAQS – ASUS AC1750 WiFi Dual Band Wireless Internet Router User Manual
Q: What is the ASUS AC1750 WiFi Dual Band Wireless Internet Router?
A: The ASUS AC1750 WiFi Dual Band Wireless Internet Router is a networking device designed to provide high-speed internet connectivity to multiple devices in your home or office. It supports the 802.11ac wireless standard and operates on both the 2.4GHz and 5GHz frequency bands.
Q: What is the range of the ASUS AC1750 WiFi Dual Band Wireless Internet Router?
A: The range of the ASUS AC1750 router can vary depending on various factors, such as the environment and physical obstructions. Generally, it can provide reliable wireless coverage for an average-sized home or small office, spanning multiple rooms.
Q: Can I use the ASUS AC1750 router with my existing internet service provider?
A: Yes, the ASUS AC1750 router is compatible with most internet service providers (ISPs). It supports standard protocols and can be configured to work with various types of internet connections, including cable, DSL, or fiber.
Q: Does the ASUS AC1750 router support guest network access?
A: Yes, the router offers a guest network feature. This allows you to create a separate network for guests or visitors to use, keeping your main network secure and preventing unauthorized access to your personal devices.
Q: Is it possible to set up parental controls on the ASUS AC1750 router?
A: Yes, the ASUS AC1750 router includes parental control features. You can use these controls to restrict internet access or set time limits for specific devices or users, helping you manage and monitor internet usage for children or other family members.
Q: Does the ASUS AC1750 router support VPN (Virtual Private Network) connections?
A: Yes, the ASUS AC1750 router supports VPN passthrough, which means it can allow VPN connections initiated from devices connected to the router. However, it does not have built-in VPN server capabilities.
Q: How can I set up the ASUS AC1750 WiFi Dual Band Wireless Internet Router?
A: To set up the ASUS AC1750 router, you typically need to connect it to your modem and follow the provided instructions. These instructions usually involve accessing the router’s web-based configuration interface through a web browser, where you can customize settings such as the wireless network name and password. The router may also come with a setup wizard that can guide you through the process.
Q: Where can I find technical support or documentation for the ASUS AC1750 router?
A: You can visit the ASUS website (www.asus.com) to find technical support resources for the AC1750 router. They provide user manuals, FAQs, firmware updates, and contact information for customer support. Additionally, you can reach out to ASUS customer support directly for assistance with any specific issues or concerns you may have.
Pdf – ASUS AC1750 WiFi Dual Band Wireless Internet Router User Manual
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/06/ASUS-AC1750-WiFi-Dual-Band-Wireless-Internet-Router-User-Manual.pdf” download=”all”]
For More Manuals Visit: ManualsDock