Pyle PLUTV48KBTR 2-Way Waterproof Off Road Speakers User Manual

Pyle PLUTV48KBTR 2-Way Waterproof Off-Road Speakers

About Pyle
Pyle is a well-known consumer electronics company specializing in manufacturing a wide range of audio equipment and accessories. The company was founded in 1960 and is based in Brooklyn, New York. Pyle Audio has built a reputation for producing affordable and quality audio products, catering to various consumer needs.

PLUTV46BTA Installation

Speaker Mounting suggestions are as below:

Auto Reconnection:

• Step 1: Unbolting the mounting bracket.
• Step 2: Slide in the buckle with a rubber pad attached to the bracket stand of the speaker. Attach the set to the handlebar of the vehicle/ship.
• Step 3/4: Attach the screw to lock the buckle.
• Step 5: Use Butt Connector accessories to Connect Speaker wires (See Illustration 1,2,3).

BT Pairing and Connection

Power:

1. Press and hold the power button to power ON/OFF.

Wireless BT Streaming Connection:

• a. Ensure BT ability is activated, then search for the PLUTV46BTA from your BT-enabled device. The light will turn blue and blink while waiting for the BT connection.
• b. The PLUTV46BTA BT Network Name will appear as “PyleUSA” (No password is required for connecting).
• c. When the BT is connected, the light will turn blue and stop blinking.

AUX-IN:

• a. Double-click the power button to switch BT mode to Aux-in mode.

Auto Reconnection:

• a. When the device is out of the BT range, the BT will be disconnected automatically, and the light turns blue while blinking.
• b. BT will automatically reconnect when detected in range again in 10 minutes.
• c. Disconnected BT after 10 minutes, you need to process the BT connection steps (above) to reconnect BT again.
• d. If the other device occupied the BT during this period (10 minutes), you need to process the BT connection steps (above).
• e. If there is no connection during this period (10 minutes), it will turn to standby mode.

Playing Music

1. 1. Press and hold for 3 seconds for Power ON or OFF
   2. Short press to play music or pause
   3. Double-click the power button to switch BT mode to Aux-in mode
   4. Short press for next track
   5. Short press for previous track
   6. Press and hold VOL+ for volume up
   7. Press and hold VOL- for volume down

Installation (Seamless Flush Mount)

Wire Diagram

System Features:

• Waterproof Rated Speakers + Wireless BT Controller System Kit
• Universal Mount System for Convenient Audio Control
• Wireless BT Music Streaming Ability
• Waterproof-Rated Marine Grade Construction
• Water-Resistant, Weatherproof Design
• Compact & High-Powered System Output
• Used For Cars, Trucks, ATV’s, UTV’s, 4×4’s, Boats, Marine Watercrafts, & PowerSport Vehicles

What’s in the Box:

• (2) 4”-inch Marine Speakers
• Amplified Wireless BT Streaming Control Unit
• (2) 2 Meters Speaker Wire
• Audio Connection Cable, 3.5mm
• (2) 5.91” x 0.75” x 0.24” -inches Rubber Pads
• (2) 6.5” x 0.75” x 0.08” -inches Rubber Pads (4) Butt Connector (Red Color For A.W.G 16-22)

Wireless BT Control Unit:

• Built-in Wireless BT Audio Receiver
• 2-Channel Amplifier Style
• Works with All of Today’s Latest Devices
• Smartphones, Tablets, Laptops, Computers, etc.
• Connect and stream Audio from Additional External Devices
• Aux (3.5mm) Input
• Range Stereo Sound Reproduction
• Integrated Power Wiring Harness
• Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/  Full-Range Amplifier
• Flush Mount Mounting Kits Included
• Universal Vehicle Mounting
• Can be In-Console Flush Mounted
• Anti-Thump Turn-on
• Soft Turn On/Off Option
• Overload & Power Protection Circuitry

Wireless BT Control Unit Technical Specs:

• Power Output: 800 Watt MAX
• 2×200 Watts RMS @ 4 Ohm
• 2×400 Watts MAX @ 4 Ohm
• Wireless BT Version: 5.0
• Wireless BT Network Name: ‘PYLEUSA’ Wireless Range: 30’+ ft.
• Amplifier Type: Class D
• Marine Grade IP65 Rating
• H.D: 0.1%
• S/N Ratio: > 95 dB
• Channel Separation: > 65 dB
• Frequency Response: 10 – 40 kHz
• Fuse: 10A
• Power: DC 12V
• Unit Dimensions (Diameter x Depth): 3.8” x 4.17” – inches

Marine Speakers:

• Pro Audio PowerSport Speakers
• Sound System: (2) x 4”Woofers + (2) x 0.5” Tweeters
• 2-Way Full Range Stereo Sound Reproduction
• Quick-Connect Spring-Loaded Speaker Terminals
• Impressive Bass Response
• Sleek Design, Machine Molded Speaker Cabinet Housing Rugged, Universal Mount Bracket Design for Roll-Bar/Roll-Cage

Marine Technical Specs:

• Power Output: 800 Watt MAX
• Marine Grade Waterproof Rating: IP-X5
• Speaker Style: Passive Speakers
• Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
• Tweeter Type: Neodymium Dome (x2)
• Frequency Response: 85Hz-20kHz
• Impedance: 4 Ohm
• Magnet Type: 20 oz. Circuit
• Mid-Woofer Voice Coil Type: 1.0″, Aluminum
• Sensitivity: 90 dB +/- 2 dB @ 1M/1W
• Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.25” ~ 2.0” -inches
• Power Supply: DC 12V
• Speaker Size (Front Diameter x Length): 5.6” x 7.3” -inches (Each)

FAQS About Pyle PLUTV48KBTR 2-Way Waterproof Off-Road Speakers