Anker is a leading consumer electronics company that specializes in producing high-quality and innovative technology products. The company was founded in 2011 by Steven Yang, a former Google engineer, and a group of friends with a vision to create reliable and affordable charging solutions for electronic devices.
Anker initially gained popularity for its power banks, which are portable chargers that provide extra battery life for smartphones and other devices. Over time, the company expanded its product range to include charging cables, wall chargers, car chargers, wireless chargers, audio accessories, smart home devices, and more.
|5.0V 3.0A/9.0V 3.0A/12.0V 2.5A/15.0V 2.0A/ 20.0V 1.5A
|Average Active Efficiency
|Efficiency at Low Load (10%)
|No-Load Power Consumption
|12.0V 2.5A/15.0V 2.0A/20.0V 1.5A
5W Max (for Apple Watch)
5W Max(for AirPods)
|0°C – 40°C
-20.70dBuA/m@10m (for iPhone)
-25.60dBuA/m@10m (for Apple Watch)
-14.18dBuA/m @10m (for AirPods)
|TX/RX Frequency Range
For iPhone: 359.20-361.60kHz
For Apple Watch: 324.80-327.20kHz For AirPods: 139.20-141.60KHz
|LED indicator Status
|Solid white light up for 3s
|Connected to power
|Charging (Airpods only)
|Metal objects detected while charging.
|Over-voltage or under-voltage protection is activated.
An incompatible AC adapter may be connected. Please use a Power Delivery adapter that meets the requirements.
- This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
- Connect the wireless charger to a Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
- Wireless charging products make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C/104°F.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during the use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Statement This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body.
Product Name: Anker 3-in-1 Cube with MagSafe
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Warning Statement: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC RF exposure statement: This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body.
This product complies with the radio interference requirements of the European Community.
GB Declaration of Conformity Hereby, Anker Innovations Limited declares that product type Y1811 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com/ To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
EU Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type Y1811 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com/
Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3-5, 80807 Munich, Germany Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
18-month limited warranty* Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Lifetime technical support
(US) +1 (800)988 7973 Mon-Fri 6:15 AM – 5:00 PM (PT)
(UK) +44 (0) 1604 936200 Mon-Sat 6:00-19:00; Sun 6:00-14:00
FAQs – ANKER Y1811 Charging Station User Manual
What is the ANKER Y1811 Charging Station?
The ANKER Y1811 Charging Station is a device that allows you to charge multiple electronic devices simultaneously. It is designed to provide a convenient and organized way to charge your smartphones, tablets, smartwatches, and other compatible devices.
How many devices can I charge with the ANKER Y1811 Charging Station?
The ANKER Y1811 Charging Station typically features multiple ports, allowing you to charge multiple devices simultaneously. The exact number of devices that can be charged depends on the specific model of the charging station. Common options include 4-port, 5-port, or even higher capacity models.
What types of devices can I charge with the ANKER Y1811 Charging Station?
The ANKER Y1811 Charging Station is designed to charge a wide range of devices, including smartphones, tablets, smartwatches, Bluetooth earphones, power banks, and other USB-powered devices. It is compatible with devices that can be charged via USB cables.
Does the ANKER Y1811 Charging Station support fast charging?
Some models of the ANKER Y1811 Charging Station may support fast charging, depending on the specifications of the charging station and the devices you are charging. Fast charging compatibility may vary for different ports on the charging station, so it’s worth checking the product specifications or documentation for details.
What kind of ports does the ANKER Y1811 Charging Station have?
The ANKER Y1811 Charging Station typically features USB ports, which are commonly USB-A ports. The number of USB ports may vary depending on the model, ranging from four ports or more. The ports are used for connecting and charging your devices using their respective USB cables.
Does the ANKER Y1811 Charging Station come with charging cables?
The ANKER Y1811 Charging Station usually does not come with charging cables included. You will need to use the charging cables that came with your devices or purchase them separately.
Can I charge my devices with cases using the ANKER Y1811 Charging Station?
In most cases, you should be able to charge your devices with cases on using the ANKER Y1811 Charging Station. However, if your case is excessively thick or has metal components that interfere with charging, you may need to remove the case for proper charging.
Is the ANKER Y1811 Charging Station compatible with international voltages?
ANKER charging stations are generally compatible with a wide range of international voltages, but it’s essential to check the product specifications or documentation for the specific model you are interested in to ensure its compatibility with the voltage in your region.
Can I use the ANKER Y1811 Charging Station to transfer data between devices?
The ANKER Y1811 Charging Station is primarily designed for charging devices rather than transferring data. While the USB ports may support data transfer, it’s important to note that the charging station may not offer specific data transfer features or functions.
Where can I find additional support or troubleshooting information for the ANKER Y1811 Charging Station?
For additional support or troubleshooting assistance, you can refer to the documentation provided with the charging station or visit ANKER’s official website. They often have support resources, FAQs, and customer service contact information available to assist you.
Pdf – ANKER Y1811 Charging Station User Manual
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/05/ANKER-Y1811-Charging-Station.pdf” download=”all”]
For More Manuals Visit: ManualsDock