Starfrit Pump N Slice Chopper and Slicer
INSTRUCTIONS FOR USE
ASSEMBLY
WASH THE APPLIANCE BEFORE THE FIRST USE, PLEASE REFER TO THE CLEANING SECTION IN THIS BOOKLET.
- Unfold the slicer’s feet (Photo A). Always make sure that both sides are completely open (Photo. B). Install the slicer on a clean and level surface for added stability.
- Remove the storage lid by pulling up the locking button.
- Install the feeder by placing its bottom edge (straight and serrated side) first and then locking it into place by snapping in the top part.
- Unlock the spring pump by pressing down on the handle while exerting a slight rotation (see illustration on the handle). The pump will deploy and the blades will move upwards.
- Place the container under the appliance and insert the pusher inside the feeder. The Pump’n’Slice is now ready to use.
SETTINGS
THE CONTROL SETTINGS ARE LOCATED ON THE BACK OF THE SLICER.
DIAL:
Select the thickness of the slices, ranging from 0.5 mm to 8 mm, by turning the dial clockwise.
SETTING TAB:
To activate the Julienne blades, lift the tab 90* from its base Rotate the tab a full turn and snap it back on its base.
- ONE TAB ACTIVATED:
One row of Julienne blades is activated. Perfect for thicker cuts.
- TWO TABS ACTIVATED:
Two rows of Julienne blades are activated. Perfect for thinner cuts.
IMPORTANT
She is cat th on the back or tie sic, just look over the controls For more information on the proper way to use the Pump’n’Slice, please refer to the Settings and Cuts Chart on the following page or visit our website at www.starfrit.com
SETTINGS AND CUTS CHART
USAGE
- Set the controls (dial and tabs) to the desired thickness and cut (see the Settings and Cuts Chart).
- Insert food inside the feeder and press down with the pusher.
- Press firmly on the spring pump while maintaining pressure on the food pusher. Repeat until you get the desired quantity.
RECOMMENDATION
For longer foods such as cucumbers, hold the end of the food and slice until the same length as the feeder. Once the food can entirely fit inside the feeder, you can finish the operation with the pusher. Always use the pusher when slicing food that fits in the food.
CLEANING
- Wash the appliance before the first use.
- It is important to always use the cleaning tool to remove food residue and parts stuck in the blades to avoid any contact with the blades.
- Remove the storage lid and feeder to expose the blades.
- All parts of the slicer are dishwasher safe. It is recommended to unlock the spring pump to fold the feet and place it in the top rack of the dishwasher.
FOR MORE MANUALS BY STARFRIT, VISIT MANUALSDOCK
FAQS About Starfrit Pump N Slice Chopper and Slicer
What is the Starfrit Pump N Slice Chopper and Slicer?
The Starfrit Pump N Slice Chopper and Slicer is a kitchen tool designed to chop and slice fruits and vegetables quickly and efficiently.
How does the Pump N Slice Chopper and Slicer work?
This device operates by using a pump mechanism that activates the rotating blades, allowing you to effortlessly chop or slice your ingredients with minimal effort.
What types of foods can I chop and slice with this tool?
You can use the Pump N Slice Chopper and Slicer for a variety of fruits and vegetables, such as onions, tomatoes, cucumbers, potatoes, apples, and more.
Is it easy to clean?
Yes, the Pump N Slice Chopper and Slicer is designed for easy cleaning. Most parts are dishwasher safe, making cleanup a breeze.
How sharp are the blades?
The blades are typically made of stainless steel and are designed to be sharp and durable for efficient slicing and chopping.
Is it safe to use?
Yes, the Pump N Slice Chopper and Slicer is generally safe to use when following the manufacturer’s instructions. However, as with any kitchen tool with sharp blades, caution should be exercised, especially around children.
Can it be used for slicing meats or cheeses?
While primarily designed for fruits and vegetables, some users may attempt to slice softer meats or cheeses with the Pump N Slice Chopper and Slicer, though results may vary.
What is the capacity of the container?
The capacity of the container can vary depending on the specific model, but it is typically designed to hold a moderate amount of chopped or sliced ingredients.
Can it be used for making salsa or salads?
Yes, the Pump N Slice Chopper and Slicer can be used to chop ingredients for salsa, salads, and other dishes that require finely chopped or sliced fruits and vegetables.
Is the Pump N Slice Chopper and Slicer suitable for professional kitchens?
While it can be a handy tool for home kitchens, its suitability for professional kitchens may depend on the volume of chopping and slicing required. For high-volume tasks, commercial-grade equipment may be more appropriate.