Welcome to ManualsDock! Read Millions of manuals for free.

Starfrit Manual Meat Grinder User Guide

Starfrit FEATURED

Starfrit LOGO

Starfrit Manual Meat Grinder

Starfrit Manual Meat Grinder

ASSEMBLY

Always wash before first use. Please refer to the cleaning section on the next page.

  1. Clean the bottom of the suction base and place it on a clean and non-porous surface for added stability.Starfrit Manual Meat Grinder 1
  2. Place the suction base 2 cm from the edge of the work surface to free the handle during usage. Lock the base to the worktop by turning the locking button clockwise (using your hand or the end of the pusher).Starfrit Manual Meat Grinder 2
  3. Insert the grinding coil into the mincer housing.Starfrit Manual Meat Grinder 3
  4. Install the cutting blade onto the grinding coil. The sharp side must be facing outwards.Starfrit Manual Meat Grinder 4
  5. Install the required blade depending on the texture desired. Screw the blade cover onto the mincer housing and turn counter-clockwise to lock.Starfrit Manual Meat Grinder 5
  6. Slide the mincer housing onto the suction base until it clicks.Starfrit Manual Meat Grinder 6
  7. Install the handle by pushing it into the grinding coil and turn the screw clockwise to lock.Starfrit Manual Meat Grinder 7

CLEANING

  • All pieces are detachable for easy cleaning.
  • Remove the grinding coil before detaching the mincer housing from the suction base.
  • All parts are dishwasher safe except the suction base.
  • Use a damp cloth to clean the suction base, do not submerge it in water or put it in the dishwasher.

TO USE

Insert cubed meat in the mincer housing. Push down with a pusher while turning handle clockwise to mince.

For better results:

  • Place the assembly upper part of the grinder in the freezer for about 2 hours before use.
  • Dice your meat into small chunks before inserting it into the meat grinder.
  • Do not overfill mincer housing.
  • Do not grind frozen meat.
  • Tendons, bones, and skin must be removed.

TO MAKE SAUSAGES

  • Immerse the casing in room temperature water for 2 hours.
  • Unscrew the cover blade, and remove the fine blade and cutting blade from the grinder.
  • Place the sausage funnel inside the cover blade and screw it back on the unit.
  • Slip the casing onto the sausage funnel leaving at least 6 inches at the end.
  • Put your refrigerated preparation into the grinder and start cranking. Air should be the first thing that comes out of the sausage funnel. Once the meat reaches the tip of the sausage funnel, remove the air from the casing and tie it to the end.
  • Let the sausage come out tightly in one long circular coil with the least amount of air possible; you will make links later.
  •  Once all your meat is in the casing, remove the casing from the grinder, remove the air, and tieto the end with a knot
  • Shape the size you want by twisting the sausage onto itself 3 times. Make sure to change the direction of the rotation of each node, so they do not come o.

Tips:
With a toothpick, prick air holes in the sausages to release pressure and avoid splitting the skin during cooking. Let dry for 2 hours on a flat surface or hang on wooden racks.

SAUSAGES WITH CHEESE CURDS, BACON AND ARUGULA

  • (24 servings)
  • 225 g (½ lb) cheese curds,
  • coarsely chopped
  • 150 g (
  • â…“ lb) bacon
  • 1 cup (250 ml) chopped arugula
  • 1 pork shoulder of about 3.6 kg (8 lbs)
  • boneless, lightly defatted, and chopped
  • Natural pork casings
  • 1 cup (250 ml) finely chopped parsley
  • 2 tbsp (30 ml) fennel
  • 1 orange for the zest
  • 3 tbsp (45 ml) salt
  • 1 tbsp (15 ml) freshly ground pepper

PREPARATION OF HOMEMADE SAUSAGES
Assemble the meat grinder with the fine blade and place the upper part in the freezer for about 2 hours. Cut meat into chunks of one or 2 inches in size and place inside a large bowl. Add spices and all the ingredients to your meat and mix all together.

Cover the bowl and then chill in the refrigerator for 2 hours. After the sausage mixture has chilled, remove the meat grinder from the freezer and grind the cold meat through the meat grinder. Ensure you have applied the suction base to stabilize the unit on the counter.

Once done, it is recommended to place the preparation in the refrigerator for at least 2 hours to allow the sausage meat to macerate and enhance flavors. Refer to the previous page to make sausages.

MERGUEZ SAUSAGES

  • (12 servings)
  • 1 kg (2.20 lbs) minced lamb
  • Lambskin
  • 1 tsp (5 ml) paprika
  • ½ tsp (2.5 ml) crushed cilantro seeds
  • 1 tsp (5 ml) sea salt
  • 1 tbsp (15 ml) sambal oelek or
  • other chili sauce, to taste
  • 1 tbsp (15 ml) extra virgin olive oil
  • 1 1/2 tsp (7.5 ml) pepper
  • 1 tsp (5 ml) cumin
  • 1 tsp (5 ml) ground cinnamon
  • 8 cloves garlic, finely chopped

SPICY MEATBALLS

  • (8 servings)
  • 350 g (
  • ¾ lb) ground beef
  • 350 g (
  • ¾ lb) sausage meat
  • 2 eggs
  • Mie of a slice of bread soaked in milk
  • 1 tsp (5ml) cumin
  • 1 tsp (5 ml) paprika
  • Bouquet of coriander and mint,
  • coarsely chopped
  • Salt and pepper

THAI TURKEY BURGERS

  • (4 servings)
  • 455 g (1 lb) ground turkey
  • 3 tbsp (45 ml) fresh coriander,
  • coarsely chopped
  • 1 tbsp (15 ml) lemon grass,
  • finely chopped
  • 2 tsp. (10 ml) soy sauce
  • 2 tsp. (10 ml) brown sugar
  • 1 tsp (5 ml) sriracha sauce
  • 2 garlic cloves, finely chopped
  • 1 green onion, finely chopped

FOR MORE MANUALS BY STARFRIT, VISIT MANUALSDOCK

FAQS About Starfrit Meat Grinder

What types of meat can I grind with the Starfrit Meat Grinder?

The Starfrit Meat Grinder can grind various types of meats, including beef, pork, chicken, and even game meats like venison.

Is the Starfrit Meat Grinder easy to assemble?

Yes, the Starfrit Meat Grinder typically comes with straightforward assembly instructions, making it easy to set up and use.

What kind of maintenance does the Starfrit Meat Grinder require?

Regular cleaning is important to maintain the performance and longevity of the grinder. Most models are easy to disassemble for cleaning and are dishwasher-safe for certain parts.

Can I grind bones with the Starfrit Meat Grinder?

It’s not recommended to grind bones with the Starfrit Meat Grinder unless specified otherwise by the manufacturer. Grinding bones can damage the grinder’s blades and motor.

What accessories come with the Starfrit Meat Grinder?

Accessories may vary depending on the specific model, but common accessories include different grinding plates for various coarseness levels, sausage stuffing attachments, and food pushers.

Is the Starfrit Meat Grinder suitable for making sausages?

Yes, many models of the Starfrit Meat Grinder come with sausage stuffing attachments, allowing you to make homemade sausages with ease.

How powerful is the motor of the Starfrit Meat Grinder?

The motor power may vary depending on the model, but most Starfrit Meat Grinders are equipped with motors powerful enough to handle typical meat grinding tasks efficiently.

Is the Starfrit Meat Grinder noisy during operation?

Like most meat grinders, there will be some noise during operation, but it’s typically not excessively loud. However, noise levels may vary depending on the specific model.

Can I grind vegetables or fruits with the Starfrit Meat Grinder?

While the primary function of the Starfrit Meat Grinder is for grinding meat, some models may come with attachments for processing fruits and vegetables, such as making homemade baby food.

Is the Starfrit Meat Grinder durable?

Starfrit is known for producing durable kitchen appliances, and their meat grinders are no exception. With proper care and maintenance, a Starfrit Meat Grinder can provide years of reliable service.

Leave a Comment