Rockville RWB80B Installation and Mounting
The brand Rockville Audio is known for its audio gear, which includes speakers, amplifiers, subwoofers, and other items linked to sound. They are renowned for providing a variety of goods aimed at both professional and consumer markets.
Thank you for purchasing these Rockville RWB Series 2-Way Wakeboard Tower Speakers. Please read this guide carefully for proper installation of your RWB Series Speakers. Should you need technical assistance please call our technical helpline at 1-646-758-0144, Monday through Thursday, 9 am to 10 pm EST., and Fridays, 9 am to 3 pm EST.
Go to vimeo.com/222473581 or scan the QR code and watch a short video, which shows you how to set this item up and how to use it.
- Remove the screw amp piece by using an Allen wrench to
- Place the front clamp piece snug against the crossbar.
- Place the rear clamp piece on the other side of the crossbar.
- Insert and tighten screws ensuring a tight, snug fit.
WARNING: MAKE SURE THAT THE POSITIVE (+) AND NEGATIVE (-) SPEAKER WIRES ARE CONNECTED TO THE CORRESPONDING TERMINALS ON THE AMPLIFIER.
- Most speaker damage is caused by amplifiers with too much power (wattage).
- The proper way to set your gain is to turn your receiver volume to 75% of the max, and then slowly turn your gain up. The second you hear any slight distortion, turn it down one notch and leave it at that setting. Amps are not meant to be played with the gain up to the max. If this is the case, lower your gain slowly until you hear the amplifier stop clipping.
FAQS About Rockville RWB80B Installation and Mounting Instructions
What is the Rockville RWB80B?
The Rockville RWB80B refers to a specific model of marine-grade speakers designed for outdoor and marine applications.
What is the size of these speakers?
The speakers are 8 inches in size, suitable for a variety of marine audio setups.
What is the power handling capacity?
The Rockville RWB80B speakers have a peak power handling of 300 watts per pair and an RMS (continuous) power handling of 150 watts per pair.
Are these speakers suitable for marine use?
Yes, the RWB80B speakers are specifically designed for marine environments, featuring weather-resistant and waterproof construction.
Do they come with mounting brackets?
Yes, these speakers typically come with mounting brackets and hardware for easy installation on boats or other outdoor settings.
Can they be painted or customized?
The speakers often have a customizable design, allowing users to paint them to match the aesthetics of their boat or surroundings.
What is the speaker’s impedance?
The speakers typically have an impedance of 4 ohms, a standard for many car and marine audio systems.
What is the frequency response range?
The speakers offer a frequency response range suitable for reproducing a broad spectrum of sound in outdoor and marine environments.
Are there specific installation instructions?
Yes, detailed installation and mounting instructions are usually provided with the speakers. It’s essential to follow these instructions for optimal performance.
Do they come with a warranty?
It’s advisable to check with the retailer or Rockville for specific warranty details, but many Rockville products typically come with a warranty.
For more manuals by Rockville ManualsDock