Panasonic LUMIX G85 4K Digital Camera Owner Manual

Panasonic LUMIX G85 4K Digital Camera

ABOUT Panasonic

Panasonic Corporation is a multinational electronics company headquartered in Osaka, Japan. It was founded in 1918 by Konosuke Matsushita and originally started as a vendor of duplex lamp sockets. Over the years, Panasonic has grown into one of the largest electronics manufacturers in the world, offering a wide range of products and services.

Panasonic‘s business operations span various sectors, including consumer electronics, home appliances, automotive, industrial solutions, and B2B solutions. The company is known for its innovation and has a strong focus on research and development.

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock, or product damage,

• Do not expose this unit to rain, moisture, dripping, or splashing.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to qualified service personnel.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

• Trade Name: Panasonic
• Model No.: DMC-G85
• Responsible Party: Panasonic Corporation of North America
  Two Riverfront Plaza, Newark, NJ 07102-5490
• Support Contact: http://shop.panasonic.com/support

About the battery pack

CAUTION

Battery pack (Lithium ion battery pack)

• Use the specified unit to recharge the battery pack.
• Do not use the battery pack with equipment other than the specified unit.
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.
• Do not touch the plug terminals (i and j) with metal objects.
• Do not disassemble, remodel, heat, or throw into fire.
  If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.
  If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

CAUTION:

• The a danger of explosion if the battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.
• When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

Warning:

Risk of fire, explosion, and burns. Do not disassemble, heat above 60 xC (140 oF), or incinerate.

About the battery charger

CAUTION!

To reduce the risk of fire, electric shock, or product damage,

• Do not install or place this unit in a bookcase, built-in cabinet, or in another confined space. Ensure this unit is well-ventilated.

Battery charger

This battery charger operates on AC between 110 V and 240 V. But

• In the U.S.A. and Canada, the battery charger must be connected to a 120 V AC power supply only.
• When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.

Cautions for Use

• Do not use any other USB connection cables except the supplied one.
• Use a “High-Speed HDMI micro cable” with the HDMI logo.
  Cables that do not comply with the HDMI standards will not work.
  “High-Speed HDMI micro cable” (Type D–Type A plug, up to 2 m (6.6 feet) long)
• Always use a genuine Panasonic shutter remote control (DMW-RSL1: optional).

Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games, etc.).

• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
• Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors.
• Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or sound.
• If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect the AC adaptor (DMW-AC10PP: optional). Then reinsert the battery or reconnect the AC adaptor and turn this unit on.

Do not use this unit near radio transmitters or high-voltage lines.

• If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected.
• Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC8: optional), or disconnect the power plug from the outlet.
• Do not press the monitor with excessive force.
• Do not press the lens with excessive force.
• Do not spray the camera with insecticides or volatile chemicals.
• Do not keep rubber or plastic products in contact with the camera for a long period of time.
• Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
• Do not leave the camera with the lens facing the sun, as rays of light from the sun may cause it to malfunction.
• Always use the supplied cords and cables.
• Do not extend the cords or the cables.
• During access (image writing, reading, and deleting, formatting, etc.), do not turn this unit off, remove the battery, or card, or disconnect the AC adaptor (DMW-AC10PP: optional). Furthermore, do not subject the camera to vibration, impact, or static electricity.
• The data on the card may be damaged or lost due to electromagnetic waves, static electricity, or the breakdown of the camera or the card. We recommend storing important data on a PC etc.
• Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation.
• The battery is not charged when the camera is shipped. Charge the battery before use.
• The battery is a rechargeable lithium-ion battery. If the temperature is too high or too low, the operating time of the battery will become shorter.
• The battery becomes warm after using and during and after charging. The camera also becomes warm during use. This is not a malfunction.
• Do not leave any metal items (such as clips) near the contact areas of the power plug or near the batteries.
• Store the battery in a cool and dry place with a relatively stable temperature: [Recommended temperature: 15 C to 25 C (59 F to 77 F), Recommended humidity: 40%RH to 60%RH]
• Do not store the battery for a long time while fully charged. When storing the battery for a long period of time, we recommend charging it once a year. Remove the battery from the camera and store it again after it has completely discharged.

Standard Accessories

Check that all the accessories are supplied before using the camera. Product numbers are correct as of September 2016. These may be subject to change.
Digital Camera Body

(This is referred to as the camera body in this owner’s manual.)

1. Interchangeable Lens*1,4
2. Lens Hood
3. Lens Cap*2
4. Lens Rear Cap*2
5. Body Cap*3
6. Battery Pack
   (Indicated as battery pack or battery in the text) Charge the battery before use.
7. Battery Charger
   (Indicated as battery charger or charger in the text)
8. USB Connection Cable
9. Shoulder Strap
10. Hot shoe cover
11. Cover for the battery grip connector

*1 This is referred to as a lens in this owner’s manual.
*2 This is attached to the interchangeable lens at the time of purchase.
*3 This is attached to the camera body at the time of purchase.
*4 The interchangeable lens (H-FS12060) included in DMC-G85M is dust- and splash-proof.

• SD Memory Card, SDHC Memory Card, and SDXC Memory Card are indicated as cards in the text.
• The card is optional.
• The description in this owner’s manual is based on the interchangeable lens (H-FS12060).
• (For U.S.A. only)
  If accessories are lost, customers can visit us at http://shop.panasonic.com/support for further information about obtaining replacement parts.
• (For Canada only)
  If any accessories are lost, customers in Canada should visit our support page at www.panasonic.ca/english/support for further information about obtaining replacement parts. 10 DVQX1003 (ENG)

About cards that can be used with this unit

About motion picture/4K photo recording and speed class ratings

Use a card that meets the following ratings of the SD Speed Class or UHS Speed Class.

• SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing. To check the class, see the labeled side, etc. of the card.
• Please confirm the latest information on the following website. http://panasonic.jp/support/global/cs/dsc/
  (This Site is English only.)
• Keep the Memory Card out of reach of children to prevent swallowing.

Quick Start Guide

• Check that the camera is turned off.

Attaching the Shoulder Strap

We recommend attaching the shoulder strap when using the camera to prevent it from dropping.

• Perform steps 1 to 8 and then attach the other side of the shoulder strap.
• Use the shoulder strap around your shoulder.
  
  • Do not wrap the strap around your neck.
  • It may result in injury or accident.
• Do not leave the shoulder strap where an infant can reach it.
  
  • It may result in an accident by mistakenly wrapping around the neck.

Charging the Battery

The battery that can be used with this unit is DMW-BLC12PP.

1. Attach the battery paying attention to the direction of the battery.
2. Connect the charger to the electrical outlet.
   • The [CHARGE] indicator A lights up and charging begins.

About the [CHARGE] indicator

On: Charging.
Off: Charging has been completed.

(Disconnect the charger from the electrical socket and detach the battery after charging is completed.)

• When the [CHARGE] indicator flashes
  
  • The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 -0C and 30 0C (50 oF and 86 oF).
  • The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth. ∫ Charging time

Charging time: Approx. 140 min

The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.

The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.

Inserting the Battery

• Always use genuine Panasonic batteries (DMW-BLC12PP).
• If you use other batteries, we cannot guarantee the quality of this product.
• Being careful about the battery orientation, insert all the way until you hear a locking sound, and then check that it is locked by lever A.
  Pull the lever A in the direction of the arrow to remove the battery.

Inserting the Card (Optional)

• Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it.
  To remove the card, push the card until it clicks, then pull the card out upright.

Attaching/Removing the Lens

• Change lenses where there is not a lot of dirt or dust.
• Do not press the lens release button A when you attach a lens.

Detaching the lens

1. Attach the lens cap.
2. While pressing on the lens release button B, rotate the lens toward the arrow until it stops, and then remove it.
   • Hold the part around the base of the lens to rotate it.

Opening the Monitor

At the time when this camera is purchased, the monitor is stowed in the camera body. Bring out the monitor as shown below.

1. Open the monitor. (Maximum 180 degree)
2. It can be rotated 180 degrees forward.
3. Return the monitor to its original position.

• Only rotate the monitor after opening it wide enough, and be careful not to use excessive force as it may be damaged.
• When not using the monitor it is recommended that you close it with the screen facing inward to prevent dirt and scratches.

Setting Date/Time (Clock Set)

• The clock is not set when the camera is shipped.

1. Turn the camera on.
   
   • When the camera is turned on, the status indicator 1 lights up green.
2. Press [MENU/SET].
3. Press to select the language, and press [MENU/SET].
4. Press [MENU/SET].
5. Press to select the items (year, month, day, hour, minute), and press to set.
6. Press [MENU/SET] to set.
7. When [The clock setting has been completed.] is displayed, press [MENU/SET].
8. When [Please set the home area] is displayed, press [MENU/SET].
9. Press to select the home area, and then press [MENU/SET].

Diopter adjustment

Adjust the diopter to suit your vision so that you can see the characters displayed in the viewfinder clearly.

Formatting the card (initialization)

Format the card before recording a picture with this unit.

Since data cannot be recovered after formatting, make sure to back up necessary data in advance.

MENU –>

[Setup] –> [Format]

Set the mode dial to [

]

Set the mode dial to [

].

The settings of the main functions are adjusted automatically.

Taking pictures

1. Hold the camera gently with both hands, keep your arms still at your side, and stand with your feet slightly apart.
   • Make sure your footing is stable and there is no danger of colliding with another person or object in the vicinity while taking pictures.
   • Do not cover the flash, AF Assist lamp A, microphone B, or speaker C with your fingers or other objects.
2. Press the shutter button halfway to focus.
   A: Aperture value
   B: Shutter speed
   C: Focus indication
   • Aperture value and shutter speed are displayed.
     (It will flash in red if the correct exposure is not achieved, except when set to flash.)
   • Once the subject is in focus, the focus indication is displayed. (When the subject is not in focus, the indication flashes.)
3. Press the shutter button fully (push it in further), and take the picture.
   • Be careful not to move the camera when you press the shutter button.
   • Pictures cannot be taken until focus is achieved when [Focus/Release Priority] is set to [FOCUS].

Free angle shooting

The monitor can be rotated to suit your needs. This is convenient as it allows you to take pictures from various angles by adjusting the monitor.

Taking pictures at a high angle

Taking pictures at a low angle

Check the picture you have taken

• The [Auto Review] function displays the picture you have just taken.
• To display the picture in Playback Mode, press [].

Names and Functions of Components

Camera body

1. Focus distance reference mark
2. St ®atus indicator/Wi-Fi connection lamp 
3. Camera ON/OFF switch 
4. Motion picture button 
5. [] (Exposure Compensation) button/[Fn1] button 
6. Function button (Fn11) 
7. Rear dial 
8. Shutter button 
9. Front dial 
10. Self-timer indicator/AF Assist Lamp
11. Mode dial 
12. Flash
13. Hot shoe (Hot shoe cover)
14. Stereo microphone
15. Flash open lever
16. Diopter adjustment dial 
17. Drive mode dial 
18. [MIC] socket
19. [REMOTE] socket
20. USB socket
21. [HDMI] socket
22. Shoulder strap eyelet 
23. Lens release button 
24. Lens lock pin
25. Mount
26. Sensor
27. Lens fitting mark
28. Touch screen/monitor 
29. [LVF] button/[Fn5] button 
30. Viewfinder 
31. Eye sensor 
32. Eyecup
33. [Q.MENU] button/[Fn2] button
34. [] (Playback) button
35. Speaker
36. [DISP.] button
37. [AF/AE LOCK] button
38. Focus mode lever 
39. Cursor buttons 
    /[ISO] (ISO sensitivity)
    /[WB] (White Balance)
    /[] (Auto Focus Mode)
    / [Fn3] 
40. [MENU/SET] button 
41. Card door
42. [] (Delete/Cancel) button/[Fn4] button 
43. Battery door 
44. DC coupler cover 
45. Release lever 
46. Cover for the battery grip connector
47. Tripod mount

About the function button ([Fn6] to [Fn10])

Function buttons ([Fn6] to [Fn10]) (P25) are touch icons. Touch the [

] tab on the recording screen to display them.

Lens

H-FS12060

1. Lens surface
2. Tele
3. Focus ring 
4. Zoom ring
5. Wide
6. Contact point
7. Lens mount rubber
8. Lens fitting mark 

Removing the Hot Shoe Cover

The camera comes with a hot shoe cover attached to the hot shoe.

Remove the hot shoe cover by pulling it in the direction indicated by arrow 2 while pressing it in the direction indicated by arrow 1.

Basic Operations

Cursor buttons/[MENU/SET] button

Pressing the cursor button:
Selection of items or setting of values etc., is performed.

Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.

This owner’s manual expresses the up, down, left, and right of the cursor button as

, , , .

Front Dial/Rear Dial

Rotating:
The selection of items or setting of values is performed during the various settings.

This owner’s manual describes the operations of the front dial/rear dial as follows:

Allows you to set the aperture, shutter speed, and other settings when in P/A/S/M modes.

Mode dial (Selecting a Recording Mode)

Select the mode by rotating the mode dial.

• Rotate the mode dial slowly to select the desired mode.

[LVF] button (Switching the Monitor/Viewfinder)

Press [LVF] to switch between the Monitor and Viewfinder.

A: [LVF] button
B: Eye sensor

Press [LVF].

• The monitor/viewfinder will switch as follows:

*If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the focus as the eye sensor is activated. The camera does not beep when focus is achieved with [Eye Sensor AF].

Notes on automatic viewfinder/monitor switching

Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the viewfinder automatically when you bring your eye or an object near it.

• If you enable the automatic viewfinder/monitor switching function and display the “On-monitor recording information screen” on the monitor, [Power Save LVF Shooting] in [Economy] can be used, allowing you to reduce battery consumption.

Touch screen (Touch operations)

The touch screen of this unit is capacitive. Touch the panel directly with your bare finger.

Touch
To touch and release the touch screen.

Drag
A movement without releasing the touch screen.

Pinch (enlarge/reduce)
Pinch the touch screen apart (enlarge) or together (reduce) with two fingers.

Setting menu items

1. Press [MENU/SET].
2. Press / ofthe cursor button to select the menu item and press [MENU/SET].
3. Press / of the cursor button to select the setting and press [MENU/SET].
   • Depending on the menu item, its setting may not appear or it may be displayed in a different way.

Switching to other menus

1. Press.
2. Press/ to select a menu selector icon, such as
   • You can also select the menu toggle icons by rotating the front dial.
3. Press [MENU/SET].

Close the menu

Press [

] or press the shutter button halfway.

Specifications

Specifications are subject to change without notice.

Digital Camera Body (DMC-G85):

Information for your safety

• Power Source: DC 8.4V ( 8.4V)
• Power Consumption:
  • 2.8 W (When recording with Monitor)
    [When the Interchangeable lens (H-FS12060) is used]
  • 2.3 W (When playing back with Monitor)
    [When the Interchangeable lens (H-FS12060) is used]

Battery Charger (Panasonic DE-A79B):

Information for your safety

• Input: 110 V–240 V 50/60 Hz 0.2 A
• Output: 8.4 V 0.65 A

Equipment mobility:

Movable

Battery Pack (lithium-ion) (Panasonic DMW-BLC12PP):

Information for your safety

• Voltage/capacity: 7.2 V/1200 mAh

Digital Camera Accessory System

*1 The AC Adaptor (optional) can only be used with the designated Panasonic DC Coupler (optional). The AC adaptor (optional) cannot be used by itself.
*2 Supplied with a battery pack (DMW-BLC12).
*3 Use if the attached lens is in contact with the tripod pedestal.

Product numbers are correct as of September 2016. These may be subject to change.

• Some optional accessories may not be available in some countries.
• NOTE: Accessories and/or model numbers may vary between countries. Consult your local dealer.
• For lens-related optional accessories such as compatible lenses and filters, refer to catalogs/Web pages, etc.
• (For U.S.A. only)
  To order optional accessories please visit http://shop.panasonic.com or your local Photo Specialty Dealer.

Limited Warranty

(ONLY FOR U.S.A.)

Limited Warranty Coverage (For USA Only)

If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product that was not sold “as is”.

Mail-In Service–Online Repair Request

Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at http://shop.panasonic.com/support.

When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured, and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up-to-date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING THE DATE OF PURCHASE, AMOUNT PAID, AND PLACE OF PURCHASE. CUSTOMERS WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.

The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data, or other memory or recorded content. The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320

PARTS AND SERVICES, THAT ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

ONLY FOR CANADA

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING THE AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.

The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage, modification, the introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.

Dry cell batteries, printer ink cartridges, and paper are also excluded from coverage under this warranty. Rechargeable batteries are warranted for ninety (90) days from the date of original purchase.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.

(As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, and loss of or damage to media or images, data, or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICE

For product operation, repairs, and information assistance, please visit our Support page : www.panasonic.ca/english/support

• SDXC Logo is a trademark of SD-3C, LLC.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
• HDAVI Control™ is a trademark of Panasonic Corporation.
• “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation.
• Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
• Adobe is a trademark or registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
• Pentium is a trademark of Intel Corporation in the U.S. and/or other countries.
• Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
• iMovie, Mac, OS X, and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
• iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• App Store is a service mark of Apple Inc.
• Google, Android, and Google Play are trademarks of Google LLC.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.
• The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®.
• The Wi-Fi Protected Setup™ Logo is a certification mark of Wi-Fi Alliance®.
• “Wi-Fi®” is a registered trademark of Wi-Fi Alliance®.
• “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are trademarks of Wi-Fi Alliance®.
• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered trademark of DynaComware Taiwan Inc.
• Other names, company names, and product names mentioned in these instructions are trademarks or registered trademarks of the companies concerned.

Support

• Panasonic Corporation of North America
  Two Riverfront Plaza, Newark, NJ 07102-5490
  http://shop.panasonic.com
• Panasonic Canada Inc.
  5770 Ambler Drive
  Mississauga, Ontario
  L4W 2T3
  www.panasonic.com

FAQS About Panasonic LUMIX G85 4K Digital Camera

For more manuals by Panasonic, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/09/Panasonic-LUMIX-G85-4K-Digital-Camera-Owner-Manual.pdf” download=”all”]