Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

Frigidaire Cooktop 30 Series Installation Instructions Manual

Frigidaire Cooktop 30 Series feature

Frigidaire LOGO

Frigidaire Cooktop 30 Series

Frigidaire Cooktop 30 Series product

About Frigidaire
Frigidaire is a brand of home appliances that are owned by the Electrolux Group. It was founded in the United States in 1918 and is now a global brand, offering a wide range of products including refrigerators, freezers, air conditioners, dishwashers, ranges, cooktops, wall ovens, washers and dryers, and more.

Frigidaire is known for its commitment to quality, innovation, and design, and offers products in a range of styles and price points to meet the needs of different consumers. If you’re in the market for a new home appliance, Frigidaire is a reputable brand that offers a wide selection of high-quality products that can help make your home more comfortable and convenient.

Full terms of the Warranty covering your Frigidaire Dishwasher are detailed on the back page of this booklet. Please read them.
The model and serial numbers for your dishwasher are found in the door opening, on the lower right flange of the tub. Record and retain these numbers.

FOR YOUR SAFETY

  • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • WHAT TO DO IF YOU SMELL GAS:
    • Do not try to light any appliance.
    • Do not touch any electrical switch; do not use any phone in your building.
    • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
    • If you cannot reach your gas supplier, call the fire department.
  • Installation and service must be performed by a qualified installer, service agency, or gas supplier.

Dimensions

Frigidaire Cooktop 30 Series fig-1

 

 

MODEL

 

 

A.

 

 

B. WIDTH

 

 

C. DEPTH

CUTOUT DIMENSIONS F. DEPTH BELOW

 

COOKTOP*

 

G.

(Min.)

 

H.

(Min.)

D. LENGTH E. WIDTH
Min. Max. Min. Max.
30″ Models 30 (76.2) 21 1/2 (54.6) 2 7/8 (7.3) 27 1/4 (69.2) 28 1/2 (72.4) 19 (48.3) 19 3/8 (49.2) 6.5 (16.5) 2 3/4 (7) 2 1/4 (5.7)
36″ Models 36 (91.4) 18 (45.7) 2 7/8 (7.3) 34 1/4 (87) 34 3/8 (87.3) 16 5/8 (42.2) 16 3/4 (42.5) 6.5 (16.5) 4 1/4 (10.8) 3 (7.6)

All dimensions are in inches (cm).

  • Dimension F is for clearance under the cooktop for the gas connection.
    NOTE: The wiring diagram for this appliance is enclosed in this booklet. Only some models are available in Canada. Printed in Canada

GAS COOKTOP INSTALLATION INSTRUCTIONS

Frigidaire Cooktop 30 Series fig-2

CAUTION
To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5″ (12.7 cm) beyond the bottom of the cabinets.

MODEL J K L
30″ Models 6″ (15.2 cm) 1¾” (3.8 cm) 4″ (10.2 cm)
36″ Models 3″ (7.6 cm) 3¾” (9.5 cm) 5″ (12.7 cm)

Wall Outlet Location

Frigidaire Cooktop 30 Series fig-3

NOTE: If an outlet is not available, have one installed by a qualified technician.

Installation

Insert the cooktop into the countertop opening.
Note: After inserting the cooktop into the countertop opening, make sure the unit is sitting on the metal flange around the top of the burner box. Cooktop must not sit on the porcelain top. Avoid cutting an oversized hole in the countertop.

Clamp Down Information

Once the cooktop is installed in the counter opening, you must clamp the unit down as shown. To clamp down, insert the bracket with the offset side of the angle into the slots on each side of the unit. The thumb screw should then be run through the bracket, up against the bottom of the counter. Tighten until the unit draws down.

Frigidaire Cooktop 30 Series fig-4

Provide an Adequate Gas Supply

  • This cooktop is designed to operate on natural gas at 4″ (10.2 cm) of manifold pressure only.
  • A pressure regulator is connected in series with the manifold on the cooktop and must remain in series with the supply line.
  • For proper operation, the maximum inlet pressure to the regulator must be no more than 14″ (35.6 cm) of water column (W.C.) pressure.
  • For checking the regulator, the inlet pressure must be at least 1″ (2.5 cm) (or 2.5 kPa) greater than the regulator manifold pressure setting. The regulator is set for 4″
    (10.2 cm) of manifold pressure, the inlet pressure must be at least 5″ (12.7 cm).
  • The gas supply line to the cooktop should be ½” (1.3 cm) or ¾” (7.9 cm) pipe.

LP/Propane Gas Conversion

  • This appliance can be used with Natural gas or LP/Propane gas. It is shipped from the factory for use with natural gas.
  • If you wish to convert your cooktop for use with LP/Propane gas, use the supplied fixed orifices in the package containing the installation Instructions Manual, in a bag marked “FOR LP/PROPANE GAS CONVERSION”. Follow the installation instructions packaged with the orifices.
  • The conversion must be performed by a qualified service technician in accordance with the manufacturer’s instructions and all local codes and requirements of
    the authority having jurisdiction. Failure to follow instructions could result in serious injury or property damage. The qualified agency performing this work assumes responsibility for the conversion.

WARNING
Failure to make the appropriate conversion can result in personal injury and property damage.

Important:
Remove all packing material and literature from the cooktop before connecting the gas and electrical supply to the cooktop.

Install Pressure Regulator

Install the pressure regulator with the arrow on the regulator pointing up toward the unit in a position where you can reach the access cap.

WARNING FIRE HAZARD.
Do not make the connection too tight. The regulator is die-cast. Overtightening may crack the regulator resulting in a gas leak and possible fire or explosion.

Assemble the flexible connector from the gas supply pipe to the pressure regulator in order: 1- manual shutoff valve, 2- ½” nipple, 3- ½” flare union adapter, 4- flexible connector, 5- ½” flare union adapter, 6- ½” nipple, pressure regulator.

Frigidaire Cooktop 30 Series fig-5

Use pipe-joint compound made for use with Natural and LP/Propane gas to seal all gas connections. If flexible connectors are used, be certain connectors are not kinked. The supply line should be equipped with an approved shutoff valve. This valve should be located in the same room as the cooktop and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the appliance.

Frigidaire Cooktop 30 Series fig-6

Open the shutoff valve in the gas supply line. Wait a few minutes for the gas to move through the gas line.

Check for leaks.
Leak testing of the appliance shall be conducted according to the manufacturer’s instructions. After connecting the cooktop to the gas supply, check the system for leaks with a manometer. If a manometer is not available, turn on the gas supply and use a liquid leak detector (or soap and water) at all joints and connections to check for leaks.

WARNING
Do not use a flame to check for leaks from gas connections. Checking for leaks with a flame may result in a fire or explosion.

Tighten all connections if necessary to prevent gas leakage in the cooktop or supply line.

Check the alignment of valves after connecting the cooktop to the gas supply to be sure the cooktop manifold pipe has not been moved.

Disconnect this cooktop and its individual shutoff valve from the gas supply piping system during any pressure testing of that system at test pressures greater than ½ psig (3.5 kPa or 14″ (35.6 cm) water column).

Isolate the cooktop from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psig (3.5 kPa or 14″ (35.6 cm) water column).

Before You Call for Service

  • Read the Before You Call for Service Checklist and operating instructions in your Use and Care Guide.
  • It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.
  • Refer to the warranty in your Use and Care Guide for our service phone number and address. Please call or write if you have inquiries about your product and/or need to order parts.

FAQs Frigidaire Cooktop 30 Series

Q: What is the Frigidaire Cooktop?

A: The Frigidaire Cooktop 30″ Series is a line of 30-inch cooktops designed for use in kitchens. These cooktops come in a variety of configurations, including gas, electric, and induction, and are designed to fit into standard 30-inch cooktop cutouts.

Q: What are the different types of Frigidaire cooktops?

A: The Frigidaire Cooktop 30″ Series includes gas, electric, and induction cooktops. Gas cooktops use a flame to heat pots and pans, while electric cooktops use heating elements. Induction cooktops use electromagnetic fields to heat pots and pans.

Q: What are the dimensions of the Frigidaire Cooktop 30″ Series?

A: The Frigidaire Cooktop 30″ Series measures 30 inches wide by 21.75 inches deep.

Q: What type of cookware can be used with the Frigidaire Cooktop Series?

A: The type of cookware that can be used with the Frigidaire Cooktop 30″ Series depends on the type of cooktop. Gas cooktops can use any type of cookware, while electric cooktops require cookware with a flat, smooth bottom. Induction cooktops require cookware made of magnetic materials, such as cast iron or stainless steel.

Q: How many burners do the Frigidaire Cooktop 30″ Series have?

A: The number of burners on the Frigidaire Cooktop 30″ Series varies depending on the model. Some models have four burners, while others have five.

Q: How is the Frigidaire Cooktop installed?

A: The Frigidaire Cooktop 30″ Series is designed to be installed into a standard 30-inch cooktop cutout. The cooktop is secured to the countertop using mounting brackets and screws.

Q: What features are included with the Frigidaire Cooktop 30 Series?

A: The features included with the Frigidaire Cooktop 30″ Series vary depending on the model. Some models include features such as a built-in griddle, power burners for quick heating, and precision temperature controls.

Q: How do I clean my Frigidaire Cooktop 30 Series?

A: The best way to clean your Frigidaire Cooktop 30″ Series depends on the type of cooktop. Gas cooktops can be cleaned with soap and water, while electric cooktops should be cleaned with a special cleaner designed for use on glass cooktops. Induction cooktops should be cleaned with a soft, damp cloth.

Q: What is the warranty for the Frigidaire Cooktop 30 Series?

A: The warranty for the Frigidaire Cooktop 30″ Series varies depending on the model and the retailer where it was purchased. Typically, the warranty covers defects in materials and workmanship for a period of one to five years.

For more manuals by Frigidaire, visit ManualsDock

 

Leave a Comment