Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

Xiaomi Redmi Note 10S User Manual

Xiaomi Redmi Note 10S-FEATURED

Xiaomi-LOGO

Xiaomi Redmi Note 10S

Xiaomi Redmi Note 10S-PRODUCT

About Xiaomi

Xiaomi Corporation is a Chinese multinational electronics company headquartered in Beijing, China. The company designs, develops and sells smartphones, mobile apps, laptops, home appliances, and other consumer electronics. Founded in 2010 by entrepreneur Lei Jun, Xiaomi quickly became one of the largest smartphone manufacturers in the world. In addition to smartphones, the company also produces other electronic products including smart home devices, wearables, and other accessories.

Xiaomi’s smartphones are known for their high-quality features and affordable prices, and the company has quickly grown to become one of the top smartphone manufacturers in the world. In addition to smartphones, Xiaomi also produces a range of other products, such as smart home devices, fitness trackers, and even electric scooters.

Xiaomi is also known for its strong focus on user experience and innovation and has won numerous awards for its products. The company has a large global presence, with products available in many countries around the world.

Thank you for choosing Redmi Note 10S
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
For more information, visit our official website:
www.mi.com/global/service/userguide
MIUI
Redmi Note 10S comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

OVERVIEW

Xiaomi Redmi Note 10S-FIG-1

SIM Card Tray

Xiaomi Redmi Note 10S-FIG-2

About Dual SIM:

  • Dual 4G SIM is offered by select telecom operators and may not be available in all regions.
  • Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
  • VoLTE is only supported by telecom operators in certain regions.
  • The system may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device.
  • Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
  • WARNING: Do not disassemble this device.

Important Safety Information

Read all the safety information below before using your device:

  • The use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
  • Use only authorized accessories that are compatible with your device.
  • This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
  • If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
  • Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
  • After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
  • The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
  • Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
    • Do not short-circuit the battery, as this may cause overheating, burns, or another injury.
    • Do not place the battery in a high-temperature environment.
    • Overheating may cause an explosion.
    • Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
    • Do not burn the battery, as this may cause fire or explosion.
    • If the battery appears deformed or damaged, stop using it immediately.
  • The user shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
  •  Keep your device dry.
  • Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
  • Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
  • For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

  • Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
  • Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
  • Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices.
  • Observe all aircraft safety regulations and turn off your phone on board the aircraft when required.
  • When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
  • To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
  • Do not use your phone to make calls while it is charging.
  • Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

Security Statement
Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi M2101K7BNY is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification
RF Exposure Information (SAR)

This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm.

SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

  • SAR 10 g limit: 2.0 W/Kg,
  • SAR Value:
    • Head: 0.597 W/Kg,
    • Body: 0.870 W/Kg (5 mm distance).

Legal Information
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

Xiaomi Redmi Note 10S-FIG-3

Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

  • GSM 900: 35.5 dBm
  • GSM 1800: 32.5 dBm
  • WCDMA 900/2100: 25.7 dBm
  • LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
  • Bluetooth: 20 dBm
  • Wi-Fi 2.4 GHz band: 20 dBm
  • Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
  • NFC: 13.56 MHz < 42 dBuA/m at 10m

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate or SAR.

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and the use of such body-worn accessories should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.5 cm away from the body.

FCC Note
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification or open Settings and type “Certification” into the search bar.
Model: M2101K7BNY

Adapter

  • Manufacturer: Xiaomi Communications Co., Ltd.
  • Address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China
  • Model: MDY-11-EY
  • Input Voltage: 100-240V~
  • Input Frequency: 50/60Hz
  • Output Voltage: 5.0V/9.0V/12.0V/20.0V/11.0V
  • Output Current: 3.0A/3.0A/2.25A/1.35A/3.0A Max
  • Output Power: 15.0W/27.0W/27.0W/27.0W/33.0W Max
  • Average Active Efficiency: ≥82.0%

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at
www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.
This smartphone is designed with
Corning® Gorilla® Glass 3.

WEEE
Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote the sustainable reuse of material resources, please recycle responsibly.

To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.
To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

Manufacturer: Xiaomi Communications Co., Ltd. Manufacturer postal address:
#019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China, 100085
Brand: Redmi
Model: M2101K7BNY
© Xiaomi Inc. All rights reserved.

FAQs Xiaomi Redmi Note 10S

Is the Redmi Note 10S a good buy?

Our Opinion. In typical Xiaomi fashion, the Redmi Note 10S offers excellent value for money while also doubling down on battery life and graphical performance.

Which is superior, the Redmi 10 or the Redmi 10S?

However, when the display, body, camera, and performance of these phones are compared, the Redmi Note 10S outperforms the Redmi 10 Power at a lower price.

Which is better, the Redmi Note 11 or the 10S?

Display contrast The display density of the Xiaomi Redmi Note 11 is 409 PPI, while the display density of the Xiaomi Redmi Note 10S is only 401 PPI. In terms of screen-to-body ratio, the Xiaomi Redmi Note 11 has a better ratio of 84.5% than the Xiaomi Redmi Note 10S’s 83.7%. Both phones have the same aspect ratio of 20:9.

Is Redmi superior to Samsung?

As smartphone manufacturers, both Xiaomi and Samsung produce excellent products. The Redmi has a long battery life and good performance, while Samsung is known for its clean software. Regardless of which device you select, there will always be a trade-off.

Which Redmi phone has the best camera?

Camera: With more megapixels and vivid images, Xiaomi Mi 10 256GB, Xiaomi Mi 10T Pro, and Xiaomi Mi 11X Pro are best buys when it comes to camera performance.

What are the drawbacks of the Redmi Note 10S?

The refresh rate of the screen is set to 60Hz.
Sharpening and contrast enhancement cannot be turned off during video playback.
Image quality from the camera is mediocre.
It easily overheats.
Stabilization is absent in 4K video.
MIUI 12.5 is still odd and bloatware-filled.

Which camera is better, the Redmi Note 10 or the Redmi Note 10S?

In terms of cameras, the former has a 48 MP (f/1.79) primary camera + 2MP Macro Sensor + 8MP Ultra-wide angle Camera + 2MP Depth Sensor and a 13MP front camera, whereas the latter has a 108 MP (f/1.69) primary camera and a 20 MP front camera.

Is Gorilla Glass present on the Redmi 10S?

Should I use a screen protector on the Redmi Note 10S screen? The display comes with Corning Gorilla Glass 3 which protects the display against day-to-day scratches. You could opt for a screen guard for added protection.

Is the Redmi Note 10s equipped with liquid cooling?

The Xiaomi Redmi Note 10s is powered by an octa-core MediaTek Helio G95 processor built on a 12nm chipset. Based on the chipset, efficient and improved gaming performance is to be expected. It also has a cooling system that lowers the temperature during heavy gaming.

For more Xiaomi manuals visit ManualsDock

Leave a Comment