Samson SR850 Semi-Open Back Studio Reference Headphones
About Samson
Samson unveiled the first wireless microphone system in 1980. Samson has developed into a pioneer in the wireless industry throughout time. We started extending the use of our audio devices in the early 1990s by creating power amplifiers, mixers, wired microphones, and signal processors. We released the first professional USB microphones in 2005 for usage by podcast fans, broadcasters, and artists.
For content producers, our USB microphones are the industry standard. Samson works to make the life of all artists easier by offering affordable, high-quality audio equipment that is incredibly valuable. Our mission is to lower the entry barrier for everyone who requires professional audio for any application. This is accomplished through our USB microphones, micro wireless technologies, portable PA systems, and accessories.
Instructions
WARNING! This product is capable of causing permanent damage to your hearing if used at excessive volumes! To protect your hearing, the Samson SR850s should always be used at as low a volume as possible. We recommend that you stringently follow the guidelines established by the U.S. Occupational Safety Health Administration (OSHA) regarding
maximum time exposure at various sound pressure levels:
- Don’t use this product for more than 8 hours at 90 dB SPL
- Don’t use this product for more than 4 hours at 95 dB SPL
- Don’t use this product for more than 2 hours at 100 dB SPL
- Don’t use this product for more than 1 hour at 105 dB SPL
- Don’t use this product for more than 1/2 hour at 110 dB SPL
- Don’t use this product for more than 15 minutes at 115 dB SPL
- Don’t operate at listening levels greater than 120 dB SPL!
Pay attention to what your ears are telling you! Ringing is a sign that you have set the gain levels too high and that damage may result. We recommend that you consult with a qualified audiologist if you exhibit ringing or any other symptoms.
Introduction
Thank you for purchasing the SR850, Studio Reference Headphones from Samson! The SR850 are semi-open headphones designed to provide a linear frequency response making them extremely accurate and great for critical mixing or for music playback. The headphone’s high-frequency response is smooth and sweet, and the bass response is warm and tight, thanks to the 50 mm neodymium drivers.
The semi-open or circumaural design reduces ear fatigue and is easy to listen to during long mixing or listening sessions. The SR850 employs soft ear cushions that are comfortable and fit snugly over almost any ear, and the self-adjusting band ensures a good fit. Whether you are just kicking back and listing to your MP3 player, or mixing your digital recording, the SR850 headphones are an ideal choice.
In these pages, you’ll find a detailed description and specifications of the SR850 headphones, as well as step-by-step instructions for its setup and use, and full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill it out and mail it in so that you can receive online technical support and so we can send you updated information about these and other Samson products in the future. Also, be sure to check out our website (www.samsontech.com) for complete information about our full product line. With proper care, your SR80s will operate trouble-free for many years. We recommend you record your serial number in the space provided below for future reference.
- Serial number: _________________________
- Date of purchase: __________________
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please retain the original packing materials and if possible, return the unit in the original carton and packing materials. If you purchased your Samson product outside the United States, please contact your local distributor for warranty information and service.
Features
- Professional studio reference headphones
- Semi-open design for the enhanced ambient listening environment
- 50 mm drivers for exceptional reproduction and wide dynamic range
- Frequency response 10 Hz – 30 kHz
- 32 ohms impedance
- Self-adjusting headband for a secure, comfortable fit
- 1/8” to 1/4” gold plated adapter included
Specifications
- Driver type . . . . . . . . . . . . . . . . . . . . . Dynamic
- Type . . . . . . . . . . . . . . . . . . . . . . . . . Semi-open type
- Driver Unit: . . . . . . . . . . . . . . . . . . . . 50 mm, 38μ diaphragm, Neodymium magnet
- Frequency response . . . . . . . . . . . . . . 10 Hz – 30 kHz
- Impedance . . . . . . . . . . . . . . . . . . . . 32Ω
- Sensitivity . . . . . . . . . . . . . . . . . . . . . 98dB
- Connector . . . . . . . . . . . . . . . . . . . . . 1/8” (3.5 mm) with 1/8’ (3.5 mm) to 1/4” (6.3mm) adapter- gold-plated
- Cable . . . . . . . . . . . . . . . . . . . . . . . . 8.25’ (2.5 m) long
- Weight . . . . . . . . . . . . . . . . . . . . . . . .95 oz (276 g)
FAQs Samson SR850 Semi-Open Back Studio Reference Headphones
Does the Samson SR850’s cable come off?
2.5 for build quality. These headphones have a somewhat inexpensive overall feel to their design and manufacture. The ear cup padding appears prone to ripping and the material is quite thin and brittle. Additionally, the audio wire is not detachable and appears to be brittle enough to break after prolonged use.
What is the Samson SR850’s ohm rating?
32Ω
How much is the Samson SR850 worth?
A pair of studio headphones with a relatively neutral sound signature, the Samson SR850 are semi-open. For headphones in this price category, the balance across all frequencies is pretty remarkable. They are therefore a desirable choice for consumers on a tight budget who need precise cans for mixing tasks.
What are headphones of reference quality?
Reference or reference-grade headphones have the flattest frequency response, and are of the highest caliber. If you’re a true audiophile, listening to a track exactly as the creator or artist intended is all that matters. Reference headphones allow you to do that.
What kind of wire do headphones use?
Tangled copper cables
Do headphones need to have ohms?
Simply said, more voltage is needed for the headphones to produce loud enough sound the greater the impedance.
What is the ideal impedance for headphones?
Low-impedance devices are those that may be used with any battery-powered audio source and have an impedance rating between 8 and 32 ohms. High-impedance devices are those with an impedance greater than 100 ohms.
What are headphones’ typical impedances?
The average impedance range for headphones is 8–600 ohms. These days, an impedance rating of 32 ohms is typical. The built-in amplifiers in a smartphone or DAP can power the majority of headphones you find around.
How can I tell if the headphones I have are high-quality?
Listening to headphones is the greatest way to assess them. You can tell good music from bad music by listening to some piano or acoustic guitar songs. But two headphones with extremely distinct sounds will frequently have comparable specifications. The pricing is perhaps the simplest and most useful specification.
What distinguishes studio headphones from everyday headphones?
Studio headphones are made to highlight any defects in the recorded sound. They shouldn’t try to make everything sound good; instead, they should offer an unfiltered view of the recording so the sound engineer can make the required adjustments while the recording is being produced.
For more manuals by Samson, Visit Manualsdock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Samson-SR850-Semi-Open-Back-Studio-Reference-Headphones.pdf” download=”all”]