Rode VideoMic Pro R Shotgun Microphone
About RODE
RODE is a well-known Australian manufacturer of high-quality microphones and audio equipment for a variety of applications such as podcasting, cinematography, music recording, and more. They are well-known for manufacturing a wide range of microphones, including USB and shotgun microphones as well as studio-grade condenser mics.
The RØDE Video Mic GO TM features an integrated shock mount based on Ricotta Lyre technology. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
INSTALLING THE BATTERY
- To remove the battery cover, push up on the indentation, then pivot the bottom of the cover away.
- Insert battery negative side up. Replace the cover– hook the top clips in, then press the bottom into place.
MOUNTING THE MIC
- Slide the standard shoe mount into the device shoe & rotate the nut clockwise to fasten.
CABLE CLIP
- Ensure the cable is secured in the clip to reduce handling noise.
VIDEO MIC PRO CONTROLS
- Mic OFF
- Mic ON (FLAT)
- Mic ON (HPF)
- Power/High Pass Filter Switch
The High Pass Filter is a low-frequency cutoff, which you can use to remove low-frequency noise such as rumble from recordings.
Three-position dB level control switch
Loud sound levels can cause serious hearing damage. Take care when setting the audio levels especially while wearing headphones.
Protect Your VideoMic Pro. Register Online Now For Your 10-Year Warranty.
FAQs Rode VideoMic Pro R Shotgun Microphone
What is the charging time for a Rode VideoMic Pro?
On a two-hour charge, the rechargeable battery is said to record for more than 100 hours.
How long does the battery on a Rode VideoMic Pro last?
70 hours
The function of a Rode VideoMic Pro.
Through a stereo mini jack audio connection, the VideoMic Pro transmits a mic level signal to the video camera. The “audio-in” socket on the camera should be used to connect the micro jack; to find the location of the socket on your particular camera type, see the user manual for your video camera.
Can I use my phone with the Rode VideoMic?
The VideoMic now has a USB-C connection, allowing it to connect as a USB microphone to iOS, Android, Windows, and macOS devices.
Can I use a PC and Rode VideoMic?
NOTE: The BT-USB Mini, VideoMic NTG, AI-Micro, VideoMic GO II, and Wireless GO II are all compatible with RDE Connect. You may setup and connect Rode items to your PC using the RDE Connect application.
How long is the rode video mic good for?
highest warning light in dB. An internal lithium-ion battery that can be recharged allows for over 30 hours of recording time. Rycote® Lyre® shock mounting of the highest caliber with cable management and a sliding rail to change the position of the microphone on a camera cold shoe.
What is the lifespan of a rode battery?
The battery can be charged for both devices using USB C and has a 7-hour rating. Last but not least, a black pouch that fits the RODE Wireless GO transmitter, receiver, cords, and windshield is supplied. Despite the fact that I usually only load the devices and camera cord, it is tightly packed but effective.
Why does the rod microphone have a red light?
little charge
The Rode VideoMic Pro has what size of a jack?
A brand-new 1/2″ condenser capsule with an extraordinarily low self-noise of just 14db powers the VideoMic Pro and outputs broadcast-quality audio through a 3.5mm minijack connector (outputting the mono signal to both left and right channels).
What kind of battery does the VideoMic Pro use?
9 volt battery
Is power required for Rode VideoMicro?
The RDE on-camera microphones that don’t have an internal 9V battery, like the VideoMicro and the VideoMic GO, rely on ‘Plug In Power’ to function. Your recording microphone won’t function without it.
For more manuals by Rode, Visit Manualsdock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Rode-VideoMic-Pro-R-Shotgun-Microphone.pdf” download=”all”]