Ring Stick Up Cam Wired
About Ring
Ring LLC is a manufacturer of home security and smart home devices owned by Amazon. It manufactures a titular line of smart doorbells, home security cameras, and alarm systems.
Set up your Stick Up Cam Wired.
- Download the Ring app.
The app walks you through setting up and managing your Stick Up Cam. Search for “Ring” in one of the app stores below, or visit: ring.com/app
- Grab your Wi-Fi password.
You’ll need it to set up your Stick Up Cam. Write it down below so it’s handy when you need it
Let’s get your Stick Up Cam ready.
First, slide off the bottom cover.
Do not reattach this cover until the setup is complete!
Powering your Stick Up Cam
You can power Stick Up Cam in one of two ways: Plug it into an outlet (with USB), or plug it into an Ethernet port that supplies Power over Ethernet (or PoE). Using PoE requires a special type of Ethernet switch or a dedicated PoE power supply, like the Ring PoE Adapter (sold separately).
Warning
For outdoor use, install your PoE Adapter indoors, then run an Ethernet cable outdoors to your Stick Up Cam Wired.
How to power Stick Up Cam with USB
Two USB power supplies are included: One for indoor use, and one for outdoor use.
- Indoor
- Outdoor
Warning
If you plan to install Stick Up Cam outdoors, secure the power supply to a wall or floor with the included screws.
Feed your chosen USB cable through the hole in the bottom cover and plug it into your Stick Up Cam. Then, plug the power supply into an outlet.
How to power Stick Up Cam with PoE
Feed your Ethernet cable through the hole in the bottom cover and plug it into your Stick Up Cam. Then, plug the other end of the cable into an Ethernet port that supplies Power over Ethernet (or PoE).
- Don’t have Power over Ethernet?
If you want to use a wired network connection but don’t have PoE, connect one of the included USB power supplies in addition to Ethernet, or purchase a Ring PoE Adapter.
- Set up your Stick Up Cam in the Ring app.
In the Ring app, select Set Up a Device When prompted, select Security Cams and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from your Stick Up Cam. - Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s updating its software. Do not unplug your Stick Up Cam while the light is flashing!
Install your Stick-Up Cam Wired
How to use Stick Up Cam on a table or shelf
Make sure that any connected cables have been routed through the hole in the bottom cover. Then, slide the cover into place on your Stick Up Cam. Secure the cover with the attached screw, using the star-shaped end of the screwdriver bit. Finally, place Stick Up Cam in your chosen position. Your Stick Up Cam is now ready to protect you.
Choose a location.
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to sit on a flat surface like a table or shelf, but
can also be mounted to a wall or ceiling. Choose a spot where it can provide the view you want, within reach of a power outlet or an Ethernet port with PoE.
- Table or shelf
- Mounted on a wall
- Mounted on a ceiling
How to install Stick Up Cam on a wall
- Remove the plastic cover and rubber pad from the base.
You’ll put the cover back on once you’ve mounted your Stick Up Cam.
- Flip the base to the rear.
The base of the stand is hinged. Before wall-mounting, flip the base down and behind your Stick Up Cam.
- Push the rubber pad back into the base.
The rubber pad should sit between your wall and the base of your Stick Up Cam.
- Drive the screws.
Hold the round part of the base against your wall, rubber-side down. Use the integrated level to ensure it’s straight.
Then mount it with the included screws.
How to install Stick Up Cam on a ceiling
- Remove the plastic cover from the base.
You’ll put the cover back on once you’ve mounted your Stick Up Cam
- Rotate the stand above the camera:
The whole stand can rotate on its axis. Before ceiling mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam.
- Drive the screws.
Hold the round part of the base against your ceiling, rubber-side down. Then mount it with the included screws.
Final steps for all mounting styles
- Close it up.
Make sure that any connected cables have been routed through the hole in the bottom cover. Then, slide the cover into place on your Stick Up Cam. Secure it with the attached screw, using the star-shaped end of the screwdriver bit.
- Snap the cover back onto the base.
Then, secure it with the included security screw, using the star-shaped end of the screwdriver bit. Now your Stick Up Cam is installed and ready to protect you.
For additional help, visit: ring.com/help
Or give us a call…
- US 1 800 656 1918
- Canada 1 855 300 7289
- Worldwide +1 310 929 7085
For a list of all our customer support numbers, visit: ring.com/callus
FAQS About Ring Stick Up Cam Wired
Can a connected camera be attached to a ring?
Yes, but only inside.
Waterproof ring stick up cam wired?
Doorbells from Ring and outdoor security cameras are water-resistant and made to survive snow and typical rainfall. Ring products should not be submerged in water or sprayed with high pressure water because they are not waterproof.
How long is the ring stick up cam’s power cord wired?
22.9 feet
What height is ideal for a ring stick up cam?
roughly nine feet
What does Ring camera’s wired mode entail?
You can utilize a different form of motion detection that prolongs battery life by choosing battery mode. You can use a more robust technique of motion detection that quickly drains a battery by choosing wired mode.
Do ring stick up cameras require the Internet?
Without being linked to a Wi-Fi network with a reliable internet connection, Ring Cameras and Video Doorbells will not function.
Does the Ring camera require power?
Battery power, cable power, or even solar power can be used to power some Ring camera types.
How far can a night vision Ring camera see?
30 feet
How long does a Ring stick camera’s battery take to charge?
5 to 10 hours.
Does the ring stick up camera function at night?
The Ring Stick Up Cam Elite has a wide viewing angle, night vision, two-way audio, HD video recording, and 1080p full HD quality. Additionally, it is powered by a Power over Ethernet adaptor, which offers dependable power and video transmission.
For more manuals by Ring, Visit Manualsdock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Ring-Stick-Up-Cam-Wired-User-Manual.pdf” download=”all”]