Ring Indoor Cam 1st Generation
About Ring
Ring LLC is a manufacturer of home security and smart home devices owned by Amazon. It manufactures a titular line of smart doorbells, home security cameras, and alarm systems.
Quick Start
- Open the Ring app and select Set Up a Device. Then follow the in-app instructions.
- Scan this code. This identifies your Ring device to make setup fast and easy.
Power it up.
First, plug the included power cable into the back of your Indoor Cam.
Then, plug the power supply into an outlet.
Download the Ring App.
The Ring App walks you through setting up and managing your Ring Cam.
Search for “Ring” in one of the app stores below, or visit ring.com/app
Set up your Indoor Cam in the Ring app.
In the Ring app, select Set Up a Device.
When prompted, select Security Cams and follow the in-app instructions.
Blue light flashing?
If the light on the front of your Indoor Cam is flashing after setup, it’s updating its software.
Do not unplug your Indoor Cam while the light is flashing!
Install your Indoor Cam.
Indoor Cam is happy just about anywhere inside. It comes ready to sit on a flat surface like a table or shelf, but can also be mounted
to a wall or ceiling.
Choose a spot where it can provide the view you want, within reach of a power outlet.
How to install Indoor Cam on a table of shelves:
It’s all ready, already! Place it at your chosen location, then plug it in. Your Indoor Cam is now ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure you have the view you want.
How to install Indoor Cam on a wall:
Remove the base. Unscrew it using a standard Phillips-head screwdriver (not included).
Re-attach the base. Screw it into the back of your Indoor Cam with the “UP” arrow on the bracket pointing upwards.
Remove the mounting bracket. Slide it down. It’ll come right off the base.
Drive the screws. Hold the plate against your wall, making sure the “UP” arrow is pointing up, and mount it with the included screws.
Mount your Cam. Guide the grooves in the base onto the hooks on the bracket. Slide Indoor Cam down to secure it to the wall.
Plug it in. Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power outlet.
Adjust the view. Now check out the live video in the Ring app to make sure you have the view you want.
How to install Indoor Cam on a ceiling:
Remove the mounting bracket. Slide it down. It’ll come right off the base.
Drive the screws. Hold the plate against your ceiling, and mount it with the included screws.
Mount your Cam. Guide the grooves in the base onto the hooks on the bracket. Slide Indoor Cam down to secure it to the ceiling.
Plug it in. Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power outlet.
Adjust the view. In the Ring App, select your Indoor Cam, then go to Device Settings, select Video Settings, and tap Rotate Video.
Now check out the live video in the Ring app to make sure you have the view you want.
Review, share, and download.
Your new device comes with a free 30-day trial of our Ring Protect video recording service.
To continue your subscription and save your videos, please visit ring.com/protect-plans
Safety and Compliance Information
Use Responsibly. Read all instructions and safety information before use.
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE
Ring Indoor Cam and its accessories are for indoor use only.
Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer.
If the device or adapter appears damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid the risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm.
PRODUCT SPECIFICATIONS
- Model Number: 8SN1S9
- Electrical Rating: 100-240 VAC, 50/60 Hz (using included power supply)
- Operating Temperature: 23°F to 113°F (-5°C to 45°C)
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/device support.
TERMS OF SERVICE AND WARRANTY
Use of the product is subject to your registration with Ring and your agreement with the Terms of Service found at ring.com/terms. To review your warranty coverage, please refer to the enclosure inside this box or visit ring.com/warranty.
FOR USERS IN THE UNITED STATES
FCC Compliance Statement (for products subject to Part 15)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is Ring LLC, 1523 26th Street Santa Monica, CA 90404.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
FOR USERS IN CANADA
Innovation, Science, and Economic Development
Canada (ISED) Compliance
This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
FAQS About Ring Indoor Cam 1st Generation
How long can a Ring camera record inside?
The device will record for up to 120 seconds when the recording length is set to Auto, which is the default setting.
How often is the ring indoor camera used?
2.4 GHz
How long does it take to set up a Ring interior camera?
The Ring Indoor Cam setup just took five minutes.
Can an indoor camera with a ring rotate?
Your Indoor Cam (1st Gen or 2nd Gen) placement, especially if it’s mounted on the ceiling, may have an impact on whether or not your images are upright. If this occurs, you can change the direction of your video via the Ring app.
Without internet, can a Ring be recorded?
In conclusion, Ring cameras do feature offline recording capabilities that allow them to keep capturing video even when they are not connected to the internet, even though they do need Wi-Fi to operate correctly.
Ring Indoor Cam is water resistant.
Ring products should not be submerged in water or sprayed with high pressure water because they are not waterproof. If possible, it’s advised to store your Ring device inside a shield, like a hanging roof.
How does the Ring Indoor Cam recognize movement?
Infrared motion capture is used by the Stick Up Cam to identify movement inside its range of vision.
Can I have more than one Ring indoor camera?
There is no restriction on how many Ring devices you can link to your account.
Has the Ring Indoor Cam audio?
The Ring Indoor cam does, by default, support sound.
Exactly how far can a Ring camera hear?
The Ring Video Doorbell 3 Plus reportedly records crystal-clear audio at distances of up to 18 feet. From 30 feet away, an Arlo Ultra security camera may capture audible speech.
Does the Ring camera display the weather?
It’s just a camera, not more.
For more manuals by Ring, Visit Manualsdock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Ring-Indoor-Cam-1st-Generation-User-Guide.pdf” download=”all”]