Welcome to ManualsDock! Read Millions of manuals for free.

Top 10 Best Speakers for Jeep Wrangler Soundbar in 2024

Best Speakers for Jeep Wrangler Soundbar-featured

Best Speakers for Jeep Wrangler Soundbar

While most Jeeps come with decent speakers, if you want to turn up the volume, you’ll need to purchase additional speakers. This will boost the amount of time you spend listening to music.

Additional speakers are needed if a Wrangler with a sound bar does not generate the crystal clear and amplified sound you desire. How do you know if they’ll get along or if it’ll be a waste of money? For the best speakers for the Jeep Wrangler soundbar, follow our experts’ recommendations.

The Advantages of Changing Your Jeep Wrangler Speakers

Here are a few reasons why an aftermarket Jeep Wrangler soundbar replacement speaker is a good idea:

  • You can get a decent device with excellent sound quality at a reasonable price.
  • Aftermarket speakers are more durable than factory-installed speakers.
  • You won’t have to spend more than you planned.
  • A higher RMS rating indicates that devices can withstand a significant quantity of power.
  • Following aftermarket speakers have a lot of power!
  • You have complete control over the bass and treble levels.

Nothing beats fantastic music to make cruising in your car more enjoyable. You may even replace the speakers that came with the Jeep to improve your experience even further. But first and foremost you should have a clear mind of your speakers’ size requirements. 

You must make a selection between component or coaxial types of car speakers. Whether you need 6×8 speakers or 6.5 component speakers, don’t worry I’ll guide you thoroughly so that you have the best equipment for your wrangler.

I spent a long time evaluating hundreds of speakers that had been suggested by both expert reviewers and casual music listeners. After tons of research, I’m now ready to share my list with you. Check out our best selections for the Jeep Wrangler

Best Speakers for Jeep Wrangler Soundbar at a Glance

  1. Focal PS-165F–Focal’s Best Component Speakers for Wrangler
  2. Alpine SPV-65JLT–Best 6.5” Weather Resistant Soundbar Speakers Upgrade for Wrangler JL
  3. Chrysler Speaker Upgrade OEM–Best 6.5 Speakers Soundbar for Chrysler Jeep Dodge (Set of 4 Mopar)
  4. CERWIN VEGA V465C–Best 2-Way Handling Component Speakers Set for Wrangler
  5. Rockville RWB80B–Rockville’s Best 8” Marine Grade Tower Speakers for Soundbar (Pair)
  6. Alpine S-S65C–Alpine’s Best 2-way Component Speakers for Wrangler Soundbar
  7. Mopar Jeep Wrangler Speaker–Best Budget Wrangler Speakers Soundbar Upgrade
  8. Pioneer TS-A1680F–Best 4-Way Car Coaxial Speakers for Wrangler (Pair)
  9. Polk Audio DB522–Best Budget 5.25” Marine Grade Speakers Soundbar for Wrangler
  10. Kicker 43DSC504–5.25” Best Budget Buy Speakers for Jeep Wrangler Soundbar

Focal PS-165F

Focal’s Best Component Speakers for Wrangler

Speakers-For-Jeep-Wrangler-SoundBar-Focal PS-165F-Img

WEIGHT: 7 lbs (3.18 KG), DIMENSIONS (W/H/L): 6” x 12” x 17”, WOOFER SIZE: 6.5”, TWEETER SIZE: 1” Voice Coil with Aluminum/Magnesium Inverted Dome, MAGNET SIZE: 3.33”, FREQUENCY RESPONSE: 60 Hz–28 kHz, SEPARATE CROSSOVER: 12–20 dB/OCT, SENSITIVITY: 91.6 dB, RATED POWER: 140/70 Watts (peak/rms)

Starting the list of the best speakers for the Jeep Wrangler soundbar is a device from Focal, a well-known manufacturer. Focal speakers are the speakers to use if you want a lot of bass. These provide the ideal balance of power handling, sensitivity, and frequency dispersion, resulting in increased sound staging, which is a must-have for Jeep Wrangler sound bars.

Sound Quality

These premium-quality speakers can help you listen to the highest-quality music while driving in a nostalgic ambiance with the windows down. The music may simply be turned up to the appropriate volume level, or even to the maximum volume level. You can count on obtaining clear and unbiased sound in any situation.

Build Quality

This brand shines in the whole automotive audio business because it uses only high-quality equipment, from the integrated crossovers to the revolving tweeters, and from the reinforced ABS basket to the built-in terminal board.

Built-in Crossovers

The bi-amped crossovers in the PS 165F component speaker system allow you to change the sound output of your woofer and tweeter by utilizing different amps. The crossovers include two positions for tweeter level and midrange adjustment, allowing you to fine-tune the sound quality of the system to your liking.

What’s Innovative

But it’s the Dual Fiberglass Structure of woofer cones that set this speaker distinct from the others. This technique guarantees excellent bass quality and replication in the mid-range.

These speakers are made in France and have sturdy aluminum baskets with Focal branding. They’re quite well-made, and all of the supporting components (wiring, speaker pods, crossovers, and so on) are of the highest possible quality.

They were excellent, and I got them after hearing them in a JK Wrangler Sport. All they need is a good clean amp to power them.

This is an outstanding two-way kit for people looking for a high-quality sound system. Simply look at the goods and feel it with your hand to judge its quality. The flax membrane is exceedingly thin and light, yet the enormous magnet and woofer basket communicate firmness. A product that comes highly recommended.

PROS

  • Durability has been improved
  • Ability to handle a lot of power
  • Construction of the highest quality
  • This is ideal for providing high-quality midbass without causing distortion
  • The soundstage is larger

CONS

  • The price tag is rather high
  • Installation by a professional is necessary

Alpine SPV-65JLT 

Best 6.5” Weather Resistant Soundbar speakers Upgrade for Wrangler JL

Spekers-For-Jeep-Wranglers-Sound-Bar-Alpine SPV-65JLT-Img

SIZE: 2 x 6.5” midbass drivers, TWEETER SIZE: 2 x 1” Teteron Dome, FREQUENCY RESPONSE: 50 Hz–22 kHz, RATED POWER: 270/90 watts (peak/rms)
With IP55 Weather Resistant Rating

The Alpine brand is unrivaled when it comes to selecting high-quality component speakers. It is considered to be one of the most reliable speakers in the music industry. Alpine speakers are installed in even the most high-end automobiles, such as Mercedes and BMW.

This is the finest replacement speaker for a Jeep Wrangler JK, in our opinion. You receive a 6.5” speaker with a 270-watt output right out of the box.

Sound Quality

Alpine’s SPV 65JLT speakers are known for their loudness, and the firm has improved on that with its SPV speakers, these 2-way drivers show Alpine is still delivering. 

They perform an excellent job in the sound aspect, despite their tight fit. With thundering bass, high-frequency treble, and flawless vocals, you’ll realize how much you’ve been missing out on.

Robust Build

It’s made to last. Its woofers are composed of extremely tough plastic and are strengthened with a carbon fiber covering. It’s designed to withstand all driving conditions so you may listen to music without interruption.

With a robust steel frame to protect your speakers, the tough, quality grills are intended to endure any bumps in the road.

IP55 Weather Resistant

A product with an IP55 rating is protected against dust infiltration that might affect the device’s regular operation, but it is not completely dust-tight. It is shielded against solid objects and water jets projected from any direction by a nozzle (6.3mm).

Added Innovative Feature

The Bluetooth capability of these speakers for Jeep Wrangler JK is also a plus. Isn’t it wonderful to be able to link your Android, Apple, and MP3 devices wirelessly!!!

Excellent Alpine sound and quality. Although the prices are a little expensive, the ease of a plug-and-play system makes installation a breeze. I would strongly advise against using a circular saw since if you are not cautious, you might cut through the side or bottom.

If you don’t remove the speaker bar, you’ll wind up with plastic fragments all over your floor. With the speaker bar removed, the procedure should take no more than 2 hours. The Alpine PSS-23 WRA was added. This provided an excellent foundation, and I believe the sound is superior to the Alpine stock upgrade.

PROS

  • Much better than the speakers that came with the car
  • The sound quality is fantastic, these speakers perform with incredible clarity
  • Their mid-range is robust
  • Compatibility with Bluetooth
  • Plug-and-play installation is simple

CONS

  • An amplifier may be required to push the loudest sounds
  • The price is a little on the expensive side

Chrysler Speaker Upgrade OEM

Best 6.5 Speakers Soundbar for Chrysler Jeep Dodge (Set of 4 Mopar 77KICK10)

Speakers-For-Jeep-Wrangler-SoundBar-Chrysler-Speaker-Upgrade-OEM-Imgg

WEIGHT: 13 lbs (5.9 Kg), DIMENSIONS (W/H/L): 9” x 9” x 10” WOOFER SIZE: 2 x 6.5” 2-way Throw Polycone TWEETER SIZE: 1” Titanium Dome, FREQUENCY RESPONSE: 35 Hz–21 kHz CROSSOVER: 4.5 kHz, SENSITIVITY: 88 dB, RATED POWER: 150/75 watts (peak/rms)

A Set of 4 Mopar-77Kick10 by Kicker comes right at the 3rd spot for the best speakers for the Jeep Wrangler soundbar. Absolutely a good fit for outstanding audio quality. This is, without a doubt, one of the best Wrangler speakers available. High-quality injection cones and rubber gazing are used in the phantom speaker. It has a peak output of 150 watts and can handle a variety of woofers, tweeters, and crossovers.

High-Quality Components

Based on the quality and efficiency of this modification, We believe this is one of the greatest sets of four speakers for Jeep Wranglers. You can rely on them all year because they are made of nylon steel and have stronger steel mounting support.

If the weather begins to stormy, the steel mounting support may be tightened to provide further protection. And because all of the parts are marine-grade, you won’t have to worry about corrosion in any sort of water, whether fresh or salty.

What’s in the Box

This premium update includes four speakers, out of which two may be put in your Jeep Wrangler’s front and two in the back. It provides a precise fit without the need for cutting or modification. Another advantage is that it simply integrates with the original factory grills to protect from the elements.

These are the speakers that I think should be standard on all comparable Wranglers and Jeeps. I was torn between buying speakers that would require brackets and wiring adapters and these OEM-fit speakers. I’m so delighted I chose these speakers.

I put these in my 2016 made. Although Jeep changed the inside interior from time to time, I believe the speakers remain the same. They were a huge improvement in terms of sound quality. I added some Poly-fill, which substantially boosted the bass.

PROS

  • Installation is simple. The plugs match the OEM wiring precisely
  • For a set of four, the price is reasonable
  • Fits in your dashboard, door, or sound bar if it’s suitable
  • Marine Grade
  • Accurate acoustic control
  • The sound quality has substantially improved
  • Off-roading is a breeze with this vehicle

CONS

  • You may need to purchase an additional amplifier
  • The handbook may be confusing for you

CERWIN VEGA V465C

Best 2-Way Handling Component Speakers Set for Wrangler

Speakers-For-Jeep-Wrangler-SoundBar-CERWIN-VEGA-V465C-Imgg

WEIGHT: 7.41 lbs (3.36 Kg), DIMENSIONS (W/H/L): 8” x 5.9” x 15.1”, WOOFER SIZE: 6.5” Mica-Filled Polycone, TWEETER SIZE: 1” Titanium Dome, FREQUENCY RESPONSE: 55 Hz–20 kHz MOUNT DEPTH: 2.78” SENSITIVITY: 94 dB, RATED POWER: 400/100 watts (peak/rms)

So say goodbye to your factory speakers and welcome to premium craftsmanship with mica-filled poly cones and a titanium dome tweeter to match superior acoustics. You receive two of these with your order, and they readily fit into your car thanks to the mounting hardware and grilles that are supplied within. Cerwin Vega backs the sleek and athletic speaker system with a full 1-year warranty to ensure quality.

The V465C is one of CERWIN VEGA’s top 6.5 component speakers for bass. These speakers were designed from the ground up with quality in mind. They can handle up to 100 watts of continuous power and have a sensitivity rating of 94 dB, which is exceptional.

Sound Performance

This speaker is capable of producing a wide variety of audio frequencies while maintaining excellent sound quality. Because the frequency impulses are equally spread, there is no aural interference or distortion.

Excellent Mids & Lows

For mid-drive speakers, it’s really loud and has a lot of bass. The tweeters are sharp, and they easily cut through the mids and lows. When they kick, you may feel it in your chest if the setting is correct.

Check for clearance or use spacers to clear windows because magnets are rather huge. These are not designed to be powered only by a head unit; they require an amp to function correctly.

PROS

  • High-quality sound production
  • Excellent mids and high-range frequency handling
  • High-quality audio components are used inside
  • There are a variety of mounting options.
  • It lasts a very long time

CONS

  • Response of the bass is subpar in some cases

Rockville RWB80B

Rockville’s Best 8” Marine Grade Tower Speakers for Soundbar (Pair)

Speakers-For-Jeep-Wrangler-SoundBar-Rockville-RWB80B-Imgg

WEIGHT: 17.34 lbs (7.8 Kg), DIMENSIONS (W/H/L): 24” x 15” x 12”,  WOOFER SIZE: 2 x 8-inch 2-way High Fidelity Tower, TWEETER SIZE: 1” Polymide Neodymium Dome, FREQUENCY RESPONSE: 60 Hz–20 kHz, MOUNTING DEPTH: 10.5” SENSITIVITY: 98 dB, RATED POWER: 300/200 watts (peak/rms)
Completely Water/Rust proof and with 1.25” Kapton Voice Coil

A rocking set of Rockville’s is nothing new to us. They make some of the best bass response models on the market right now, so it’s no surprise that their meaty 2-way marine option can handle some serious power. That’s what made us include a marine-grade product by them for the best speakers for the Jeep Wrangler soundbar which is RWB80B.

They feature a peak power handling of 300 w, a sound pressure level of roughly 98 dB, a wide frequency response, and a low impedance.

Marine Grade

They’re water-resistant and won’t be harmed by saltwater or dampness. All terminals have been sealed with rubber gaskets and are fully protected from salt and freshwater environments. They are also entirely corrosion-resistant.

High-Quality Build

The speakers have also been calibrated specifically for the PA voice-over feature. It’s also designed with a Santoprene surround and a polypropylene Mica injected cone. You also don’t have to be concerned about roll bars because it has wide mounting screws that can accept them.

Superb Design

They’re meant to look like wakeboard towers and install easily on bars and roll cages. They are suitable for a variety of vehicles, but the extensive efforts taken by Rockville to preserve these bad boys from the corrosive salty sea air make them an excellent choice for a maritime mount.

When you’re looking for a durable product to go with your Jeep Wrangler, this is one of the finest speakers you’ll find. It has the rugged and long-lasting quality you’re looking for.

The speakers sound fantastic, the audio is crystal clear, and the bass is considerably better than I expected. It was straightforward to set up.

When I took my Wrangler Altitude out then all of my buddies were blown away by the sound quality. They performed admirably on the trails, with water and dust/dirt having little effect. As a result A+ from my side!

PROS

  • Waterproofed to withstand the marine surroundings
  • For easy installation on your Jeep Wrangler, a large mounting screw is delivered
  • High output power
  • For harsh circumstances, a nylon mounting bracket with integrated steel is made adjustable

CONS

  • The speaker bolts, which are about a foot long, extend too far
  • Professional installation is required

Alpine S-S65C

Alpine’s Best 2-way Component Speakers for Wrangler Soundbar

Speakers-For-Jeep-Wrangler-SoundBar-Alpine-S-S65C-Imgg

WEIGHT: 6 lbs (2.72 Kg), DIMENSIONS (W/H/L): 17” x 14” x 33” WOOFER SIZE: 6.5” Carbon Fiber Reinforced Plastic, TWEETER SIZE: 1” Silk Dome, MOUNTING DEPTH: 2.2”, CUTOUT DIA: 5” FREQUENCY RESPONSE: 70 Hz–22 kHz, SENSITIVITY: 88 dB, RATED POWER: 240/80 watts (peak/rms)

If your standard speakers are broken or you want to up your audio game, the Alpine S-S65C is the speaker for you.

The Alpine brand is unrivaled when it comes to selecting high-quality component speakers. It is considered to be one of the most reliable speakers in the music industry. As you may know, Alpine speakers are installed in even the most high-end automobiles, such as Mercedes and BMW.

System’s Performance

Alpine’s legendary S-S65C speakers are known for their loudness, and the firm has improved on it with its S-Series speakers, and these 2-way drivers show Alpine is still delivering.

Built to Last

Even though it is a low-cost speaker, it is constructed to last. Its woofers are composed of extremely tough plastic and are strengthened with a carbon fiber covering.

Furthermore, the Alpine S-S65C is constructed to survive. The odds of it blowing up at high volumes are limited to none, and it is weather-resistant.

With so many features and coming from a well-known company like Alpine, one may assume that the Alpine S-S65C speakers will break the bank. However, this is not the case, since these speakers are reasonably priced. They are, in fact, the finest affordable speakers for Jeep Wrangler JK, according to us.

This is my second set of these speakers for a Jeep Wrangler Sahara, and they sound fantastic. I have them connected to a dedicated amp, as well as a subwoofer and another set of Alpine speakers (identical speakers, but different components). The sound is very clear all around.

PROS

  • Their mid-range is prominent
  • The setup process is easy and uncomplicated
  • Much better than the speakers that came with the vehicle
  • Compatibility with Bluetooth
  • The construction is of high-quality

CONS

  • The responsiveness at the low end would have been much better

Mopar Jeep Wrangler Speaker

Best Budget Wrangler Speakers Soundbar Upgrade 

Speakers-For-Jeep-Wrangler-SoundBar-Chrysler-Mopar-Jeep-Wrangler-Speaker-Img

WEIGHT: 6 lbs (2.72 Kg), DIMENSIONS (W/H/L): 10” x 10” x 10” WOOFER SIZE: 2 x 6.5” 2-way Throw Polycone TWEETER SIZE: 1” Titanium Dome, FREQUENCY RESPONSE: 35 Hz–21 kHz, CROSSOVER: 4.5 kHz, SENSITIVITY: 88 dB, RATED POWER: 150/75 watts (peak/rms)

If you’re on the fence about these speakers, don’t be. Buyers claim they’re a huge boost in sound quality for a very low price. They must, however, be compatible with your sound bar to be useful.

This update was made possible thanks to Mopar’s partnership with Kicker. Because Kicker speakers, amplifiers, and subwoofers are created specifically for automobiles, not just any car, but Jeep vehicles, this synergy might occur.

System’s Performance

The goal of the Mopar speaker upgrade is to provide world-class ultimate-performance audio. As you travel in your Jeep Wrangler, the speaker is meant to improve your music listening experience. Two speakers are included in the set, which may be mounted in the front or back of your vehicle.

These speakers have polypropylene cones and UV-resistant ribbed surrounds for precise acoustic control. The installation time for these speakers is usually around 10 minutes. The Jeep Wrangler’s sound will be clearer and crisper due to the improvement.

Easy Installation

The package includes all of the necessary equipment as well as full instructions for installing the speakers. Aside from the ease of installation, the sound quality produced by this device is excellent and will not give you a headache. It is made of high-quality material that helps to suppress vibrations so you can enjoy clear sound. 

The stocks were so bad that these sound fantastic in contrast. And it wasn’t until I put four of them in that I realized how awful the old speakers were. The distinction is undeniable.

The term plug-and-play is 100% accurate. The front of the driver’s side is more difficult to remove than the others, but anyone with simple hand tools can accomplish it.

They were acquired for my 2018 Jeep Wrangler JKU. I started by plugging them into the soundbar. It took me less than 5 minutes to do both, and the sound quality was far superior to the stock speakers.

PROS

  • The sound is incredible
  • The bass in the sound is of the highest quality
  • Installation is simple. The plugs match the OEM wiring precisely
  • The structure is of high grade
  • Both the sound bar and the door speakers will fit
  • The pricing is reasonable
  • Accurate acoustic control

CONS

  • They are quite fragile
  • The handbook–user’s manual might be perplexing at times

Pioneer TS-A1680F

Best 4-Way Car Coaxial Speakers for Wrangler (Pair)

Speakers-For-Jeep-Wrangler-SoundBar-Pioneer-TS-A1680F-Img

WEIGHT: 4.6 lbs (2 Kg), DIMENSIONS (W/H/L): 4.5” x 7.5” x 13.5”, WOOFER SIZE: 6.5″ Carbon and Mica Reinforced Injection Molded Polypropylene (IMPP) Cone, MIDRANGE SIZE: 1.625″ Polyetherimide Cone, TWEETER SIZE: 11mm (0.43”) Tweeter and 11mm Super Tweeter (0.43”), FREQUENCY RESPONSE: 30 Hz–25 kHz, FREQUENCY RANGE: 36 Hz–25 kHz, CROSSOVER: 3.6 kHz, MOUNT DEPTH: 2.37”, SENSITIVITY: 88 dB, POWER RATING: 350/80 Watts (peak/rms)

Pioneer’s TS series speakers have a Carbon & Mica reinforced IMPP cone. This, along with a revised magnetic circuit and a long symmetrical voice coil, results in rich, deep bass with little distortion.

I can’t have a thorough list of the best speakers for the Jeep Wrangler soundbar without including the Pioneer TS- A1680F. This is one of the most eloquent speakers I’ve ever heard. This item is by far the most affordable, but don’t be deceived by its low cost. We’ve reviewed a few Pioneer products on this site and think they’re great.

System’s Features

The speakers have an IMPP woofer cone with carbon and MICA reinforcement, an 11.2 oz. Ferrite magnet motor construction, and grills. The top-mount depth of the speaker is 2.37”. They feature a lesser sensitivity of 88db and a frequency range of 36 Hz–25 kHz.

Sound Quality

The Pioneer TS speaker produces a clean and accurate sound. These speakers are widely accessible in a variety of multi-fit installation adapters, and their performance flexibility may be greatly enhanced. These speakers provide excellent sound quality that matches and complements the look of your Jeep Wrangler.

Flexible Fit

The 6.5′′ multi-fit installation adapters that come with the speakers increase versatility and acoustic performance. It also contains the CarSoundFit software, which is a smartphone-based automotive sound simulator for experiencing in-vehicle sound.

Even if your OEM stereo isn’t very good, you may use equalization on your media device to compensate for the added bass/volume and shorten the break-in process. Because they aren’t as boomy as the poor OEM speakers, the bass is much cleaner. You can get a lot more performance from these speakers than OEMs if you give them more power and add a bass boost EQ.

PROS

  • A perfect balance of strength and control. You may listen to dynamic music without sacrificing the quality of the song
  • It’s simple to set up
  • Made of a long-lasting substance
  • The shift from one sound to the next is seamless
  • The acoustic performance is excellent

CONS

  • The bass response may be inadequate
  • It may be difficult to fit and may require some special adjustments

Polk Audio DB522

Best Budget 5.25” Marine Grade Speakers Soundbar for Wrangler

Speakers-For-Jeep-Wrangler-SoundBar-Polk-Audio-DB522-Imgg

WEIGHT: 3.9 lbs (1.77 Kg), DIMENSIONS (W/H/L): 14.2” x 9.7” x 16”, WOOFER SIZE: 5.25” UV-resistant Polypropylene Cone, TWEETER SIZE: 0.75” Silk Dome, CUTOUT DIA: 4.76”, MOUNTING DEPTH: 2.01”, FREQUENCY RESPONSE: 55 Hz–22 kHz, SENSITIVITY: 91 dB RATED POWER: 300/100 watts (peak/rms)
IP55 Rating with Marine Certified

Polk audio manufacturers are well-known for producing high-quality car speaker sound systems. The 5.25″ waterproof front speakers are an excellent replacement for the stock speakers in the Jeep Wrangler.

The Dynamic Balance Technology in this premium speaker set automatically optimizes and adjusts all frequencies for the greatest output. With an IP rating of 55, the DB552 is meant to perform even during your outdoor escapades.

Rigid & Sturdy Build

This product stresses innovation, is long-lasting, useful, and stylish, and features a high-quality sound system. This marine-built component is well-suited for usage in harsh vehicles like the Jeep Wrangler.

It’s tough while yet being refined. The Polk Audio 5.25” weatherproof is a fantastic alternative in your Jeep Wrangler if you want to upgrade your factory sound system to a larger, high-performance, and richer sound.

Sound Quality

It has above-average peak and RMS power, implying that it may be rather loud. The audio quality is also acceptable. While it isn’t as good as the most costly sound systems, it will do for traveling around in your Jeep.

These speakers were designed by Polk Audio to provide a smooth frequency. There would be no restrictions if you played music at high volumes since Polk Audio was able to eliminate distortions.

Versatility at its Peak

The adaptability of these speakers is unrivaled; when a speaker is exceptionally efficient, it uses less power while producing more output. You’ll feel like you’re in a theater or Jeep party with the DB522. A Mica Cone Woofer and a tweeter dome are included in the coaxial speakers, allowing the set to generate some big and great sound.

Dome tweeter and Mica cone woofer deliver rich full-range sound with brilliant melodic details that reach your ears directly.

Marine Grade

The speakers’ weather resistance is increased by being marine-rated; they won’t corrode or malfunction even in extreme heat or in the presence of seawater. The UV rays, fog, and salt resistance of the Polk DB552 UltraMarine have been certified by ASTM. For a customized installation, the product comes with all of the necessary mounting hardware.

These were purchased as a straight replacement on my 2018 Jeep Wrangler Rubicon. The audio components in most Jeep Wranglers are subpar, but these Polk speakers brought them to life!

This winter has seen some very bad storms and snowfall in Texas, but the speakers have held up well. They come highly recommended from me.

PROS

  • High-quality construction
  • Long-lasting and durable
  • Waterproof insulations that are mostly used in maritime audio applications
  • A portable speaker that has been approved for use in the maritime environment
  • Hardware for installation is included
  • Two foam rubber gaskets are included for a precise fit
  • Sports grilles are included

CONS

  • Some adjustments/tunings may be required
  • You may require an external amplifier

Kicker 43DSC504

5.25” Best Budget Buy Speakers for Jeep Wrangler Soundbar

Speakers-For-Jeep-Wrangler-SoundBar--Kicker-43DSC504-Imgg

WEIGHT: 4.84 lbs (2.2 Kg), DIMENSIONS (W/H/L): 6.5” x 7.4” x 7.8” WOOFER SIZE: 5.25” Polypropylene Cone, TWEETER SIZE: 0.5” PEI Balanced Dome, MAGNET: Neodymium, CUTOUT DIA: 4.5”, MOUNTING DEPTH: 2.06”, FREQUENCY RESPONSE: 45 Hz–20 kHz, SENSITIVITY: 90 dB, RATED POWER: 200/50 watts (peak/rms)

You are looking for the best speakers for your Jeep Wrangler sound bar, but none of your options seem right since installation is a hassle? Kicker 43DSC504 can be the one for you.

Kicker, a tried and proven provider of the finest automotive speakers on the market, has released another outstanding set of the best 5.25′′ speakers. Kicker not only makes high-quality automobile speakers but also subwoofers and amplifiers for various settings.

System’s Features

These 5.25” Speakers will provide you with a level of clarity that you’ve never experienced with OEM speakers. The 2-way design generates a dynamic sound by transferring the higher frequencies to the PEI domed tweeter and the lower frequencies to the 5.25” driver woofer made of polypropylene

They’ll get a lot of volume out of even low-powered factory radios, so you can keep pumping your tunes for years to come.

Sound Performance

When compared to the factory-installed speakers, you will notice a big improvement in sound of 43DSC504. The mids are also fairly decent, but the lows aren’t the finest, so this isn’t the ideal choice if you want a speaker that pumps and thumps nicely.

However, if you like clarity, a good foundation, and just the perfect amount of treble, this Kicker set is for you.

The Innovation

The Kicker 43DSC504 features a zero-protrusion PEI tweeter that performs admirably at high frequencies. Even at high levels, the sound does not get distorted thanks to EVC (extended voice coil) technology, neodymium magnets in balanced-dome tweeters, and UV-treated surrounds.

We believe that the Kicker 43DSC504 – 2 Way Speakers are the finest 5.25” speakers for Jeep Wrangler because of the numerous strong-suits that come at such a low price.

These are fantastic for just nice quality, especially for my 13 Jeep Wrangler Freedom Edition. They won’t break the budget and will certainly blow you away with sonic quality. To suit my headliner, I had to remount them and drill new holes with different screws.

The sound is kicking after a simple installation. Look through the entire box while installing the speakers since two grey wires with ends absolutely match the speakers. I completed a rudimentary installation and planned to connect the speakers to the car’s wiring with existing speaker wire and solder.

PROS

  • In many vehicles, they are simple to install
  • The highs are fantastic
  • Long-lasting and durable
  • The one-year warranty is included
  • Even at high levels, the sound remains clear

CONS

    • The lows could have been a little more impressive

FAQs-Best Speakers for Jeep Wrangler Soundbar

What size speakers fit in a Jeep Wrangler sound bar?
In the Wrangler’s overhead soundbar, there are 6.75″ GM/Chrysler woofers and 3.5″ tweeters. You may replace the woofers with 6.5″, 6”x8” or 5.25″ ones of the same size.

For the smaller ones, a speaker adapter bracket is necessary, and it is offered at a significant discount with your speaker order.

How do I get more bass in my Jeep Wrangler?
Adding a subwoofer is a simple solution! Subwoofers add additional bass to your system, resulting in a higher overall sound quality. Furthermore, adding a subwoofer to your Jeep Wrangler will relieve the burden on the existing smaller speakers, allowing them to produce greater sound.

What brand of speakers does jeep use?
The Jeep Grand Cherokee is the company’s flagship model. As a result, it has built the pinnacle of sound systems in collaboration with Harman Kardon. The sound system, which includes no less than 19 speakers, is designed to match the capacity of America’s premier off-road vehicle.

How do I make my Jeep bass louder?
The + and − setting soft-keys can be used to adjust the settings, or you can pick any point on the scale between the “+” and “–” soft-keys. Then press the soft-key for the back arrow. 

To change the setting for Bass/Mid/Treble, simply move your finger up or down, or tap directly on the desired setting.

Where is the amplifier in a Jeep Wrangler?
The factory amplifier for the 2018 Jeep Wrangler JL will be located behind the kick panel speaker, which is fitted into the dash beneath the steering column and to the left of it. Unfortunately, you’ll have to remove the speaker to get to it.

What size are Jeep TJ speakers?
Two 4″x6″ full-range speakers are installed in the bottom section of the under-dash in the Wrangler’s basic system. An overhead sound bar with two 5.25″ speakers was also available.

How many speakers are in a 2020 Jeep Gladiator sport?
The Jeep Gladiator comes equipped with an 8-speaker audio system, 2 USB ports, and other features. You can add smartphone integration options like Apple CarPlay® and Android Auto, as well as a navigation system, a 9-speaker Alpine® audio system, more USB connections, and more to yours.

What size subwoofer is in a Jeep Wrangler?
The normal subwoofer size in the Jeep Wrangler is 8 inches. You may now travel higher if you don’t mind losing cargo space. With an 8-inch diameter, you can even place the sub under your seat.

Best Speakers for Jeep Wrangler Soundbar-Buyer’s Guide

Picking the right speaker for your Jeep Wrangler may be time-consuming and difficult. As a result, we’ve only included the highest-rated speakers for your Jeep Wrangler.

It’s now up to you to choose which one to go with. Most of the time, it’s a good idea to go shopping having a clear idea of what you want to get even before you leave your home.

The elements to examine are same whether you’re shopping for low-cost speakers or high-end ones. After you’ve decided on a budget, consider the sorts of speakers you want, as well as the specific specs and features of the many models that fit your needs. Here’s a quick review of some key issues to consider.

Size & Weight

Sound bar speakers, as you might expect, come in a variety of forms and sizes. As a result, it’s critical to know what size will fit your Jeep ahead of time. For example, the JK’s golden standard is 6.5”, which will accommodate both the sound bar and the door panel.

TJ’s soundbar is, on the other hand, is slightly smaller 5.25”. Whereas, 6”x4” will suit the knee panel. There will be no compatibility difficulties if you keep to these dimensions.

Speakers Material

The quality of the materials used to make speakers is also essential in influencing their performance. Low-quality speakers with a lot of pointless functions are always a better choice than those constructed of solid and lasting materials.

To avoid any damage, seek for speakers built of completely waterproof and moisture-resistant materials.

Audio Quality

This is certainly the most significant, consideration for a customer when purchasing a speaker. You may get a sense of the speakers’ audio quality by looking at the frequency range.

The greater the frequency range, the more high-quality music the speakers can create. It’s worth noting that the frequency range is 10 to 20 kHz. The highest frequency is 20 kHz, while the lowest is 10 Hz.

You won’t need the complete frequency range to judge sound quality because there is no evidence that extremely high frequencies produce audible sound.

Design & Furnish

Several factors have been considered by the various makers of the above-mentioned speakers. The designs and finishes of their speaker device are among these features. Without a question, they have a goal in mind while designing and manufacturing their product, but does the design suit you and your vehicle?

There are a variety of designs that are unique to each speaker. Some are completely black, while others are blue, and yet others are chrome-plated. One thing to bear in mind is that these qualities all contribute to the longevity of your speaker.

Power Handling (RMS or Peak)

The first thing to realize is that peak power and RMS (root mean square) are not interchangeable terms. Most people get these two terms mixed up, but it’s critical to understand the differences. 

The problem is that peak power is always more than RMS power, and manufacturers normally indicate RMS someplace in the rear of the packaging. However, it is the root mean square that reveals the speakers’ capabilities.

Sensitivity

Another key element to think about is the speaker’s sensitivity. The sensitivity rating of a speaker shows how much sound it can emit once it is powered up.

If the wrangler jeep’s head unit has a greater power rating, you should seek for a speaker with a lower sensitivity, and if the head unit has a low power rating, you should look for a speaker with a higher sensitivity.

Compatibility & Mobility

When purchasing a speaker, make sure it is compatible with your vehicle. It is an important decision for you to make, as you will not want to waste time chasing down places with speakers to replace them if they do not fit into your vehicle.

Examine the speakers to see whether they are compatible with the brand and model of your vehicle. The size and configuration must also be compatible.

Mobility is another factor to consider when purchasing a vehicle speaker. When it comes to surround sound effects, most of us want to get a stereo speaker. It implies we like the sensation of sound coming from all directions.

Well, not every speaker has the same ability. However, if your speaker has rotating tweeters, it’s great for mobility. If you want to put speakers in every corner of your Jeep, choose one that can make good use of the available space.

Budget

For other people, the budget proves to be a bargain, because when it comes to electrical items, you get what you paid for. Even on a tight budget, though, you may be able to achieve superb sound from inexpensive speakers.

Conclusion

Finally, no matter which Jeep sound bar you choose, we’re confident you’ll be pleased with the increased sound quality. After all, a Jeep is an exceptionally entertaining vehicle that is also one of the easiest to modify, so why not personalize it to your liking?

The finest speakers for a Jeep Wrangler should be simple to install, have excellent sound, and be energy efficient. They should also be able to be fitted in the front or back of the car. Before purchasing new speakers, make sure to measure the available space in your vehicle. Also, make sure you can modify the sound to your liking.

Our Pick

The following are our suggestions for you

Check Out More!!!

Leave a Comment