Pyle PHPWA15TB Portable PA Speaker System User Guide

Pyle PHPWA15TB Portable PA Speaker System

WARNING

1. DO NOT place objects on top of the device, as objects may scratch the device.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT insert any foreign objects into the device.
4. DO NOT expose the device to a strong magnetic or electrical field.
5. DO NOT use the device in the rain
6. Please check with your Local Authority or retailer for proper disposal of electronic products.
7. DO NOT disassemble the device. Only a certified service technician should perform the repair.
8. The device has apertures to disperse heat. DO NOT block the device ventilation, the device may become hot and malfunction as a result.

FEATURES

This system can be used with personal computers, mobile phones, DVDs, VCDs, CDs, LD, TV, MP3, radio, electronic piano, and any devices that have audio output. Amplifier circuits use high-performance, high-fidelity design, coupled with high-quality professional speakers, to make the sound field positioned so clearly, with distinct levels of effect. The sound system is outstanding, with deep and powerful bass and the treble effect is strong, with clear and bright pitch.

The professional electronic frequency division circuit enhances the machine’s crossover point effect. Using professional design and manufacture of high-capacity batteries, and dedicated audio power capacitors, to make the speaker’s power reserve margin larger, more stable, better dynamics, and higher signal-to-noise ratio.

Wireless BT Connectivity

• Built-in BT for Wireless Music Streaming
• Simple & Hassle-Free Pairing
• Works with All of Today’s Latest Devices, Smartphones, Tablets, Laptops, Computers, etc.
• Wireless BT Version: 5.0
• Wireless BT Network Name: ‘PYLEUSA’
• Wireless Range: Up to 32 ft.

REMOTE CONTROL FUNCTIONS

1. Standby button
2. Choose input AUX/FM/BT/USB signal
3. Mute button
4. Play/Stop button on MP3 mode, scan function on FM mode
5. Next song of USB/MicroSD, next channel of FM mode
6. Previous song of USB/MicroSD, last channel of FM mode
7. EQ eetc. on MP3 mode
8. Decrease music volume
9. Choose the song number directly on MP3 mode
10. Stop button
11. Increase speaker volume
12. Repeat the song on USB/MicroSD mode

BACK PANEL FUNCTIONS

1. USB Control board
2. USB and micro SD input jack
3. Master volume control knob
4. 3.5MM AUX input jack
5. Bass volume control knob
6. Treble volume control knob
7. Echo volume control knob
8. Microphone volume control knob
9. Charge LED indicator, red color is on charge mode, green color is full charge
10. DC 15V input jack
11. 6.5MM microphone input jack
12. Extra DC 12V input
13. Power switch
14. LED light switch
15. FM antenna
16. Guitar volume control
17. 6.5MM guitar input jack

RECORDING FUNCTION

1. In USB or Micro SD mode, short press the REC button to start recording, and short press again to complete recording.
2. In USB or Micro SD mode, press and hold the MODE button to play the recording. While playing the current recording, press and hold the REC button to delete the current recording. press and hold the mode button again to quit recording.

BUILT-IN WIRELESS BT FUNCTION

• Press the “STANDBY/INPUT” button to choose the input signal source as the BT channel when starting the machine.
• Please ensure the BT devices you want to connect are open. Then scan and connect the speaker to the device. When the connection is successful, a “tick” tone will prompt. If the speaker can’t be connected, please restart the speaker or the device and try again.
• After the mobile phone and the BT are successfully connected, you can play music. To ensure continuous stability of the music signal, try to keep the BT and the mobile phone facing one another
• This unit supports iPad, iPhone, Samsung, HTC, MOTOROLA, Nokia, and other BT mobile devices wirelessly transmitting audio. It supports stereo playing of A2DP.
• The BT of the unit can be used up to 10 meters if there are no barriers.

TWS CONNECTIVITY

1. Turn ON both speakers and set to BT mode
2. Choose a speaker & press and hold the ” ” button for 3 seconds, the display will show “T-ON”, and then two speakers will connect automatically.
3. If you want to turn off the TWS function, you just need to press and hold the ” ” button for 3 seconds, ddisplayplay will show “T-OF”, and then two speakers will be TWS off.

TROUBLESHOOTING

For more Manuals by PYLE, visit MANUALSDOCK

Faqs About Pyle PHPWA15TB Portable PA Speaker System