Parallel AV SM Series 65 Inch Smart Waterproof 4K UHD Mirror TV User Manual

Parallel AV SM Series 65 Inch Smart Waterproof 4K UHD Mirror TV

Warnings

To reduce the risk of fire, electric shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your TV. The mains outlet should be installed near the equipment, and be easily accessible. The TV should be connected to a grounded GFCI-protected mains outlet.

• To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid.
• Do not overload AC outlets or extension cords. Overloading can cause a fire.
• Close supervision by adults is necessary when a product is used by or near children.
• Do not operate the product with a damaged cord or plug or if it has been damaged in any manner.
• Do not let the power cord come in contact with hot surfaces.
• If you notice any smoke or scorched smell near the product, unplug the power cord and contact qualified personnel for service or repair.
• Do not use or place any combustible or flammable substances near the product.
• Do not use this product for other than intended use.
• This product is intended for indoor use only.
• For added safety, during a light storm, or when this product is left unattended and unused for a long me, unplug it from the wall outlet and disconnect the antenna.
• Do not use detergents containing abrasives.

Accessories

Please make sure that the accessories are in the package as shown below:

1. Mounng back box x 1 pcs.
2. Mounng bolts set x 1 pcs.
3. Installaon manual x 1 pcs.
4. Installation drawing x 1 pcs.
5. Warranty service card x 1 pcs.
6. Remote control x 2 pcs.
7. Power cable x 1 pcs.
8. Power adapter x 1 pcs.**
9. Waterproof remote control holder x 1 pcs.
10. User manual x 1 pcs.

Remote control

Battery replacement

Bluetooth remote control for Smart TV

Battery replacement

• You can use the Power button from the original remote control. 1) Hold the Power for 3 seconds (you can see the red blinking indicator on the smart remote). 2) Line up smart remote and original remote head-to-head. 3) Push a button on the original remote.
• Before using the remote control you should connect it to the TV. For connecting push and hold the buttons “V-” and “PG-” ll red indicator on the RC become blinking. Then go to the BT songs on the TV and pair it to the HBG_RC device.
• For calibration Airmouse push and hold buttons “OK” and “HOME” LED indicator is on. Then put the remote control on the flat horizontal surface for 3 seconds. Once the red indicator is off you can use the RC.

Inputs and Outputs

Panel buttons

1. Power On/Off
2. On-screen display menu
3. Volume level selection
4. Channel selection
5. Input source menu

Troubleshooting

For more Manuals by PARALLEL AV, visit MANUALSDOCK