Kenmore 11022066100 Automatic Washer Use And Care Manual

Kenmore 11022066100 Automatic Washer

About Kenmore

Kenmore is a brand of home appliances and home goods that have been around for over 100 years. The brand is owned and sold exclusively by Sears Holdings Corporation, a major American retailer. Kenmore offers a wide range of products, including refrigerators, dishwashers, washing machines, dryers, ovens, and vacuums.

Kenmore products are known for their quality and reliability, and the brand has a reputation for producing long-lasting home appliances that are built to withstand the wear and tear of everyday use. Many Kenmore products also come with advanced features and technologies, such as smart home compatibility and energy-saving modes, making them an attractive choice for tech-savvy and environmentally-conscious consumers.

With its wide range of products and commitment to quality and innovation, Kenmore has become a trusted and well-respected name in the home appliance industry.

WE SERVICE WHAT WE SELL

Your purchase has added value because you can depend on Sears HomeCentral _ for service. With over 12,000 trained repair specialists and access to over 4.2 million parts and accessories, we have the tools, parts, knowledge, and skills to ensure our pledge: We Service What We Sell.

Sears Maintenance Agreements

Your Kenmore appliance is designed, manufactured, and tested to provide years of dependable operation. Yet any major appliance may require service from time to time. The Sears Maintenance, agreement offers you an outstanding service program, affordably priced.

The Sears Maintenance Agreement

• Is your way to buy tomorrow’s service at today’s price.
• Eliminates repair bills resulting from normal wear and tear.
• Provides for non-technical and instructional assistance.
• Even if you don’t need repairs, provide an annual Preventive Maintenance Check, at your request, to ensure that your appliance is in proper running condition.

Some limitations apply. For more information, call 1-800-827-6655.
For information concerning Sears Canada Maintenance Agreements, call 1-800-361-6665.

WARRANTY

Limited Lifetime Warranty on Stainless Steel Basket.
For the lifetime of the washer from the date of purchase, Sears will replace the Stainless Steel wash basket due to defective material or workmanship. This warranty does not include any polishing marks found in the bottom of the basket which occurs during the break-in period of the washer. You will be charged for labor after the first year.

Limited Ten-Year Warranty on Plastic Tub*

For the second through the tenth year from the date of purchase, Sears will replace the plastic tub if defective in material or workmanship. You will be charged for labor after the first year.

Limited Five-Year Warranty on Drive System Parts*

For the second through fifth year from the date of purchase, Sears will replace the following drive system parts if defective in material or workmanship. The washplate shaft, drive pulley, lower drive bearing plate and drive belt. You will be charged for labor after the first year.
Limited Two-Year Warranty on SENSOR SMART TM

Electronic Control Board

For two years from the date of purchase, Sears will replace the electronic control boards if defective in material or workmanship.
You will be charged for labor after the first year.

Full One-Year Warranty on Mechanical and Electrical Parts

For one year from the date of purchase, when this washer is installed and operated according to the instructions provided in the Owner’s Manual, Sears will repair or replace any of its mechanical or electrical parts if defective in material or workmanship.

Warranty Restriction

If the washer is subject to other than private family use, the above warranty coverage is effective for only 90 days.

Warranty Service

Warranty service is available by contacting the nearest Sears Service Center in the United States or Canada. This warranty applies only while the product is in use in the United States o Canada. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

Warranty terms may vary in Canada.
In the U.S. for Sears warranty information or to contact a Sears

Service Center, call 1-800-4-MY-HOMP (1-800-469-4663). In Canada, call 1-877-533-6937. Sears, Roebuck and Co. D/817WA, Hoffman Estates, IL 60179 Sears Canada, Inc. Toronto, Ontario, Canada M5B 2B8

In the space below, record your complete model number, serial number, and purchase date. You can find this information on the model and serial number label, as shown. Have this information available to help you quickly obtain assistance or service when you contact Sears concerning your appliance.

• Model number 110
• Serial number
• Purchase date

Save these instructions and your sales receipt for future reference.

WASHER SAFETY

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

• Read all instructions before using the washer.
• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable, or explosive substances as they give off vapors that could ignite or explode.
• Do not add gasoline, dry-cleaning solvents, or other flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.
• Before the washer is removed from service or discarded, remove the door or lid.
• Do not reach into the washer if the drum, tub, or agitator is moving.
• Do not install or store the washer where it will be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.
• See Installation Instructions for grounding requirements.

INSTALLATION REQUIREMENTS

Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the washer basket.
Do not put the expanded foam plug back into the washer.
Tools needed for connecting the drain hose and water inlet hoses

• Pliers (that open to 1%6 in. [3.95 cm])
• Flashlight (optional)

Parts supplied:

1. Drain hose “hook”
2. Yellow, single-wire hose clamp (for the top of the drain hose)
3. Water inlet hoses (2)
4. Flat water inlet hose washers (4)

Tools needed for securing the drain hose and leveling the washer

• Open-end wrench %6in. (1.43 cm)
• Level
• Woodblock
• Ruler or measuring tape

Parts supplied:

1. Beaded tie strap
2. Front leveling feet with nuts (2)
3. Rearself-adjusting feet (2)

Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.” Your washer can be installed in a basement, laundry room, closet, or recessed area. (See “Drain System.”) Proper installation is your responsibility.

You will need

• A water heater is set to deliver 120°F (49°C) water to the washer.
• A grounded electrical outlet is located within 4 ft (1.2 m) of where the power cord is attached to the back of the washer. (See “Electrical Requirements.”)
• Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).
• A level floor with a maximum slope of 1 in. (2.5 cm) under the entire washer. Installing the washer on the carpeting is not recommended.
• A sturdy floor to support the washer weight (water and load) of 315 Ibs (143 kgs).

Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures. See “Washer Care” for winterizing information.

Recessed area or closet installation
The dimensions shown are for the recommended spacing allowed, except the closet door ventilation openings. The dimensions shown for the closet door ventilation openings are the minimum required.

• Additional spacing should be considered for ease of installation and servicing.
• Additional clearances may be required for wall, door, and floor moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.
• If a closet door is installed, the minimum air openings at the top and bottom of the door are required. Louvered doors with air openings in the top and bottom are acceptable.
• Companion appliance spacing should also be considered.

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. (See “Alternate Parts You May Need.”)

Standpipe drain system – wall or floor (view I & 2)
The standpipe drain requires a minimum diameter standpipe of 2 in. (5 cm). The minimum carry-away capacity can be no less than 17 gal (64 L) per minute. A2 in. (5 cm) diameter to 1 in. (2.5 cm) diameter standpipe adapter kit is available. See “Alternate Parts You May Need.”

The top of the standpipe must be at least 39 in. (99 cm) high and no higher than 96 in. (2.4 m) from the bottom of the washer.

Laundry tub drain system (view 1)

The laundry tub needs a minimum 20 gal (76 L) capacity. The top of the laundry tub must be at least 39 in. (99 cm) above the floor and no higher than 96 in. (2.4 m) from the bottom of the washer.

Floor drain system (view 2)

The floor drain system requires a siphon break that may be purchased separately. (See Alternate Parts You May Need.”) The siphon break must be a minimum of 28 in. (71 cm) from the bottom of the washer. Additional hoses might be needed.

Electrical Shock Hazard

• Plug into a grounded 3-prong outlet.
• Do not remove the ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Failure to follow these instructions can result in death, fire, or electrical shock.

1. 120-volt, 60-Hz., AC-only, 15- or 20-ampere, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.
2. This washer is equipped with a power supply cord having a 3-prong ground plug.
3. To minimize possible shock hazards, the cord must be plugged into a mating, 3-prong, ground-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.
4. If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.
5. Do not ground to a gas pipe.
6. Check with a qualified electrician if you are not sure the washer is properly grounded.
7. Do not have a fuse in the neutral or ground circuit
   1. 3-prong grounding plug
   2. 3-prong grounding-type outlet
   3. Groundprong
   4. Power supply cord

WASHER CARE

Cleaning the exterior

Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach. Occasionally wipe the outside of your washer to keep it looking new.

Cleaning the interior

To clean your washer interior, add 1 cup (250 mL) of chlorine bleach and 1 scoop or cap full of detergent into your dispenser, and run the washer through the NORMAL cycle using hot water. Repeat this process if necessary.
NOTE: Remove any hard water deposits using only cleaners labeled as washer safe.

Replace inlet hoses after five years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.
Install and store your washer where it will not freeze. Because some water may stay in the Hoses, freezing can damage your washer If storing or moving your washer during freezing weather, winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

• Unplug the washer or disconnect the power.
• Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

To winterize the washer:

1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 quart (1 L) of R.V.-type antifreeze in the basket.
4. Run the washer on an EXTENDED SPIN cycle.
5. Unplug the washer or disconnect the power.

To use the washer again:

1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Plug in the washer or reconnect the power.
5. Run the washer through the Normal cycle with 1 scoop or cap full of detergent to clean out the antifreeze.

To transport the washer:

1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. If the washer will be moved during freezing weather, put a quart (1 L) of R.V.-type antifreeze in the basket. Run the washer on an EXTENDED SPIN cycle.
4. Disconnect the drain from the drain system.
5. Unplug the power cord.

FAQs Kenmore 11022066100 Automatic Washer

For more manuals by Kenmore, visit ManualsDock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/02/Kenmore-11022066100-Automatic-Washer-.pdf” download=”all”]