Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

JVC HAA11T Series Marshmallow True Wireless Earbuds Instructions

JVC HAA11T Series Marshmallow True Wireless Earbuds FEATURE

JVC LOGO

JVC HAA11T Series Marshmallow True Wireless Earbuds

JVC HAA11T Series Marshmallow True Wireless Earbuds PRODUCT

About JVC

JVC (JVCKENWOOD Europe B.V.) is JVCKENWOOD Corporation’s wholly owned subsidiary. JVC is a renowned creator and manufacturer of sophisticated audio and video products that employ cutting-edge technologies to produce high-quality sound and visuals.

JVC provides high-definition displays and home theater projectors, digital video camcorders, home theater systems, audio components and systems, portable audio products, digital storage devices, audio and video accessories, and automobile audio/video products in its consumer products.

For U.S.A.

Supplier’s Declaration of Conformity

  • Model Number: HA-A11T
  • Trade Name: JVC Responsible party: JVCKENWOOD USA Corporation
  • Address: 500 Valley Road, Suite 203 Wayne, NJ 07470
  • Telephone Number: 973-317-5000

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. 

ATTENTION: The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

Startup Guide

For Customer Use:

Enter the Model No. and Serial No. (on the charging case) below. Retain this information for future reference.

  • Model No.
  • Serial No.

Manufacturer:

JVCKENWOOD Corporation

3-12,Moriya-cho,Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

IC:12522A-A11T

FCC ID:2AKMBHA-A11T

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low-power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. HA-A11T has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

For Canada CAN ICES-3 (B)

This device contains license-exempt transmitters)/receivers) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low-power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. HA-A11T has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.

For Europe

Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding Radio and RoHS.

European representative of JVCKENWOOD Corporation is: JVCKENWOOD Deutschland GmbH, Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

This product contains rechargeable battery. Contact JVC authorised dealer for disposal.

Hereby, VCKENWOOD declares that this System [HA-A11T] is in compliance with the essential requirements and other relevant provision of Directive 2014/53/EU. A copy of the Declaration of Conformity with regard to the RE Directive 2014/53/EU can be downloaded from the following Web sites (http://www.jvc.co.jp/ecdoc/).

WARNING For Europe

  • Do not listen at high volume for an extended period. Do not use while driving or cycling.
  • Pay special attention to traffic around you when using the headphones outside. Failure to do so could result in an accident.
  • This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire or the like.
  • This product contains rechargeable battery, which is not replaceable. Danger of explosion if user replaced battery. Do not replace battery user own self.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

WARNING For Europe

Warnings for battery

Please do not handle the battery in the following manners. It can lead to an explosion or leakage of flammable liquids and gases.

  • Dispose in fire, discard, crush or cut
  • Leave in extremely high temperature environment
  • Leave in extremely low pressure environment

BLUETOOTH SPECIFICATION

  • Frequency range: 2.402 GHz – 2.480 GHz
  • Output power: +2.2 dBm (MAX), Power Class 1

WARNING For U.S.A

Hearing Comfort and Well-Being

  • Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play. 
  • If you experience a ringing in your ears, reduce volume or discontinue use.

Traffic Safety

  • Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas
  • You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
  • Do not turn up the volume so high that you cannot hear sound around you.

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-1

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-2

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-3

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-4

Perform pairing with “JVC HA-A11T L” and “HA-A11T R” (or “Headset” ). Select “JVC HA-A11T L” from the device list, and accept a pairing request from “HA-A11T R” (or “Headset” ).

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-5

Flashes slowly

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-6

The BLUETOOTH device displays the connection status of only one earphone, but sound can be heard from both left and right earphones

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-7

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-8

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-9

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-10

JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions-11

https://manual3.jvckenwood.com/ accessory/headphones/global/ 

For detailed operations such as phone call, troubleshooting and information on the European Guarantee, please refer to the user manual.

Bluetooth Trademark

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

FAQs About JVC HAA11T Series Marshmallow True Wireless Earbuds

How long does the JVC HA A11T’s battery last?

28-Hour Power Source

How can I connect my JVC HA A11T earphones?

When the L indication begins to flash slowly, push and hold the button for approximately 3 seconds to turn off the power. Then, push and hold the button until the indicator begins to flash rapidly once more. 2Turn on the BLUETOOTH device’s Bluetooth function. 3From the device list, choose “JVC HA-A11T L”.

How do you power on a JVC HA a11t?

1 Unlock the charging case.
2 Before charging, remove the insulation sheet.
3 Insert the L and R earphones into the charging case precisely and securely. Make sure the indicators light up.

What is the problem with my JVC HA a11t not charging?

Due to inadequate contact, the earphones may not have been properly charged. Check the charging terminal’s condition before determining whether charging can be completed properly. Poor contact may come from dust or grime on the charging terminal. Perform checks on a regular basis.

How long does it take to charge JVC wireless earphones?

The built-in, high capacity rechargeable battery provides up to 35 hours of wireless listening time with a 3-hour charging period.

How can you tell whether your earbuds are fully charged?

The red light shows that the battery is low, while the green light indicates that it is fully charged.

How can I connect my JVC HA A11T earphones?

When the L indication begins to flash slowly, push and hold the button for approximately 3 seconds to turn off the power. Then, push and hold the button until the indicator begins to flash rapidly once more. Turn on the BLUETOOTH device’s Bluetooth function. From the device list, choose “JVC HA-A11T L”.

Why are my JVC earphones not connecting?

Insert both earbuds into the charging case, wait for the indication light to turn off or on, and then remove both earphones at the same time. Make sure the BLUETOOTH device is within 1 meter of the System when pairing. To connect, use the BLUETOOTH device. Enable pairing by turning on the BLUETOOTH device.

For more manuals by JVC, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/JVC-HAA11T-Series-Marshmallow-True-Wireless-Earbuds-Instructions.pdf” download=”all”]

Leave a Comment