Iottie iTap 2 Wireless Air Vent Mount Manual

Iottie iTap 2 Wireless Air Vent Mount

About iOttie

iOttie is a well-known brand that specializes in producing high-quality car mounts and accessories for mobile devices such as smartphones and tablets. They are particularly known for their innovative and user-friendly designs that aim to make it easier for people to use their devices while driving.

iOttie’s product range includes various types of car mounts, such as dashboard mounts, windshield mounts, vent mounts, and CD slot mounts, among others. These mounts are designed to securely hold devices of different sizes and shapes, allowing users to have hands-free access to their devices while driving for navigation, music streaming, and more, without compromising safety.

Getting Started

For optimal mounting and charging, please follow the detailed instructions within this manual when using the iTap 2 Wireless Charging Mount. iOttie is not liable for possible damages due to product misuse.

Critical Information

• Placing a Metal Plate

The position of the Metal Plate on the phone is very important for receiving an optimal charge. Please review the installation instructions. Inaccurate placement of the metal plate may cause slow charging and overheating.

• Recommended Mounting

For optimal holding, it is recommended to portrait mount your phone. For thick phone cases or landscape mounting, place the Metal Plate outside of your case to minimize the possibility of slippage. Please review the installation instructions.

• Compatibility

Before using the product, make sure your device is Qi Wireless compatible. Compatible devices include iPhone X, iPhone Xs, iPhone Xs Max, iPhone XR, Samsung Galaxy Note S9, S9, S9+, and S8.

• Qi Wireless Charging in Vehicle

Use the included iOttie Car Charger and Micro USB Cable. If you do use a third-party car charger, use a Qualcomm Quick Charge 2.0 or equivalent adapter to receive a wireless charge (with compatible devices).

At a Glance

Metal Plate Alignment Guide

The Qi Receiver Coil is usually located in the center area of the phone. Check with your phone’s manufacturer for Qi coil location. Below are some examples of commonly used phones.

We strongly suggest you use the included Placement Guide to place the Metal Plate at the bottom of your smartphone or case to receive an optimal charge.

• Align the + symbol and the side marker lines with the center of your phone or case, making sure the cut-out for the Metal Plate is at the bottom.

Once aligned, remove the adhesive strip at the top and stick the Placement Guide to the phone.

• Lift the Guide from the bottom to stick the Protective Film onto the area where the Metal Plate will be.

Put the Placement Guide back down, flat against your phone or case.

Please note, that the protective film is not necessary if you’re using a phone case.

• Place one of the Metal Plates as indicated by the cut-out on the Guide. Save the other Metal Plate as backup.

• Remove the placement guide. Then, simply position the metal plate on top of the magnetic mount head.

Mount Installation

• Please use caution when adjusting the Twist Lock on the air vent blade. Do not apply excessive pressure to the Twist Lock as this may damage the blades. iOttie is not liable for damages due to product misuse.

1. Open the Twist Lock and push the mount completely onto the vent blade.
2. Slowly tighten the Twist Lock for a secure connection to the air vent.
3. Plug Micro USB into the charging mount on the back of the magnetic mounting head.
4. Insert the car charger into your vehicle’s power port.

• The iTap 2 Wireless Air Vent Mount does not have an on/off switch. Once the device is plugged into the power source it will stay on.

Wireless Charger Specifications

Car Charger Specifications

Charging Indicator

Declaration of Conformity (FCC)

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. You can refer to the following completed FCC warnings. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Operational Warnings

• During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot.
• If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. The device is only to be operated in a dry, indoor environment.
• Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Operating this device in a hot environment or in direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product in cooler temperatures.
• Please use the included components for an optimal experience. To support Qi wireless charge when using a third-party car charger or a USB Power Adapter use a minimum output of both “9.0V-1.67A or 5.0V-2.0A” and at least QC 2.0.
• The product’s signal could possibly interfere with your TPMS (tire pressure monitoring system). If you notice that your TPMS light turns on, please try using your mount in different locations to avoid the signals from interfering with each other.
• California Proposition 65 this product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

Caution

OLD ELECTRICAL APPLIANCES MUST NOT BE DISPOSED OF TOGETHER WITH THE RESIDUAL WASTE, BUT HAVE TO BE DISPOSED OF SEPARATELY.

EN

If you love your iOttie product, let us know by leaving a review online, or connect with us on our social platforms.

All iOttie products are backed by a 2-year warranty.

Locate your last parking location with iOttie’s DriveSmarter app.

• www.iottie.com
• cs@iottie.com

FAQS About Iottie iTap 2 Wireless Air Vent Mount

For more manuals by Iottie, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Iottie-iTap-2-Wireless-Air-Vent-Mount-Manual.pdf” download=”all”]