EGO Power Plus FN1800 18-Inch Portable Misting Fan User Guide

EGO Power Plus FN1800 18-Inch Portable Misting Fan

About EGO Power Plus

EGO Power+ is a brand that specializes in manufacturing cordless outdoor power equipment, primarily focused on lawn and garden tools. They are known for producing battery-powered alternatives to traditional gas-powered tools, offering users a quieter, more environmentally friendly, and hassle-free experience.

EGO Power+ products include a range of outdoor equipment such as lawnmowers, leaf blowers, string trimmers, chainsaws, hedge trimmers, and more. These tools are powered by their own proprietary lithium-ion battery technology, which is designed to deliver sufficient power and performance to handle various outdoor tasks.

SAFETY GUIDELINES

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention measures.

WARNING: Be sure to read and understand all safety instructions in this Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,” and “CAUTION” before using this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES

These inform the user of important information and/or instructions that could lead to equipment or other property damage if they are not followed. Each message is preceded by the word “NOTICE”, as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are not followed.

INTRODUCTION

Congratulations on your selection of the new EGO 56V LITHIUM-ION MISTING FAN. It has been designed, engineered, and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact the EGO customer service center at 1-855-EGO-5656.

This manual contains important information on the safe assembly, operation, and maintenance of your product. Read it carefully before using the product. Keep this manual handy so you can refer to it at any time.

SPECIFICATIONS

ASSEMBLY

WARNING: If any parts are damaged or missing, do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

WARNING: Do not attempt to modify this product or create accessories not recommended for use with this blower. Any such alteration or modification is misused and could result in a hazardous condition leading to possible serious personal injury.

WARNING: Always remove the battery pack from the product when you are assembling parts, making adjustments, cleaning, or when the product is not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

UNPACKING

• This product requires assembly.
• Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

WARNING: Do not use this product if any parts on the packing list are already assembled for your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

• Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please return the product to the place of purchase.

ASSEMBLING THE WHEELS (Fig. 2)

1. Align the hole of one of the wheels with the wheel axle of the fan, and mount the wheel onto the axle.
2. Thread one of the wheel screws through the hole of the wheel into the wheel axle, then tighten the screw with the supplied wrench.
3. Snap the hubcap onto the wheel.
4. Assemble the other wheel following steps 1 – 3.

ATTACHING THE TOP HANDLE (Fig. 3)

1. Align four supplied screws with the holes in the top handle and the holes in the fan enclosure.
2. Insert the screws and then tighten them with the supplied wrench.

OPERATION

WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

Before each use, inspect the entire product for damaged, missing, or loose parts, such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.

WARNING: Always remove the battery pack from the product when you are assembling parts, making adjustments, cleaning, or when it is not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

APPLICATION

You may use this product for the purposes listed below:

• General ventilation in most household applications
• Outdoor cooling while connected to a water source

ADJUSTING THE FAN ANGLE (FIG. 4)

1. Grasp the top handle to hold the fan enclosure.
2. Rotate the fan enclosure lock knob counterclockwise to loosen the adjustable fan enclosure.
3. Tilt the adjustable fan enclosure forward or backward to your desired angle. The fan can pivot up to 90° forward up to 135° backward.
4. Rotate the lock knob clockwise to secure the fan enclosure at your desired angle.

TO INSTALL/REMOVE BATTERY PACK (FIG. 5)

CHARGE THE BATTERY PACK BEFORE THE FIRST USE

1. Pull the battery compartment cover to open it.
2. To install the battery pack, align the ribs of the battery pack with the mounting slots in the battery compartment, and then press the battery pack into the battery compartment until it snaps into position.  To detach the battery pack, press the battery-release button to release the battery pack, and then lift the battery pack out of the battery compartment.
3. Push the battery compartment cover to close it. Ensure that it is completely closed to prevent water from contacting the battery or entering the battery port.

TO START/STOP THE MISTING FAN

NOTICE: The initial factory setting for the airspeed is level 3. The fan will save the last used air speed setting and will revert to it upon restart.

IMPORTANT: Turbo setting will not be saved.

NOTICE: The misting setting will not be saved, and by default will be off every time the fan is turned on.

POWER BUTTON

• Press the power button briefly to turn the fan ON.
• Press the power button briefly again to turn the fan OFF.

AIRSPEED ADJUSTMENT

Normal Air Speed

• Press the “+” button to accelerate the airspeed and press the “–” button to decrease the airspeed. There are 5 speed levels.
• The airspeed indicator displays green lights corresponding to the current speed levels.

TURBO Mode

• Press the “TURBO” button, the TURBO indicator will light up green and the fan will shift into “TURBO” mode, i.e. the highest airspeed.
• When in “TURBO” mode, press the “TURBO” button again, the TURBO indicator will turn off and the fan will resume the previously active airspeed.
• When in “TURBO” mode, press the “–” button, the TURBO indicator will turn off and the fan will shift to the air speed level 5.

MISTING FUNCTION

USING THE FAN WITH A WATER BUCKET (NOT INCLUDED) (Fig. 6)

WARNING: Children can fall into buckets and drown. Keep children away from buckets containing even a small amount of liquid.

NOTICE: Clean the bucket with soap and water before each use.

• Disconnect the battery pack.
• Place the bucket on a flat, level surface.
• Add ONLY clean, cold water into the bucket. Do not overfill.
• Immerse the filter end of the intake tube down into the water bucket.

NOTICE: Do not bend the intake tube, and always make sure the water flows smoothly through the tube.

• Install the battery pack and close the battery compartment cover.
• Press the power button to turn the fan ON.
• Press the misting mode selection button to start misting:

1. Press the misting mode selection button once and the misting indicator will light up two green lights which indicate the ‘continuous’ misting mode – misting all the time without stopping.

NOTICE: It may take around 15 seconds before you actually see the mist coming out of the misting nozzles the first time. This delay is due to the time it takes for water to flow from the water bucket to the nozzles.

1. Press the misting mode selection button again and the misting indicator will light up one green light which indicates the ‘intermittent’ misting mode – misting for 5s every 10s.
2. When the misting is in intermittent mode, press the misting mode selection button again and the misting indicator lights will turn off and the misting will stop.

NOTICE: When the misting operation is finished, pull the intake tube out of the water and run the fan in misting mode until all the water clears from the tube. This helps prevent the residual water in the tube from causing unexpected misting when the fan is started again.

USING THE FAN WITHOUT MISTING

If desired, this product may be used as a fan only, when not connected to a water source. When not in use, always place the intake tube in its storage area (See section “STORAGE” in this manual) to protect it from damage and contamination.

INTERNAL PROTECTION

When the misting function is activated but no water mist is coming out:

• The water pump will keep running for a short while, and then stop automatically to protect internal electronics.
• Depending on misting mode, the misting indicator will display one or two solid green lights for a short while, and then flash one or two green lights continuously as an alert for the operator to:

1. Check if the intake tube is properly immersed in water.
2. Check if the misting nozzle(s) is clogged, and clean according to the “NOZZLE MAINTENANCE” chapter.
3. Press the misting mode selection button to restart misting.

TROUBLESHOOTING

WARRANTY

EGO WARRANTY POLICY

5-year limited warranty on EGO POWER+ outdoor power equipment and portable power for personal, household use.

3-year limited warranty on EGO POWER+ System battery packs and chargers for personal, household use. An additional 2-year extended warranty applies for the 10.0Ah/12.0Ah battery whether sold separately (Model# BA5600T/BA6720T) or included with any tool if it is registered within 90 days of purchase. 5-year limited warranty on CHV1600 charger, designed for use with Zero Turn Riding Mower for personal, household use.

2-year/1-year limited warranty on EGO outdoor power equipment, portable power, battery packs, and chargers for professional and commercial use.
The detailed warranty period by-products can be found online at http://egopowerplus.com/warranty-policy.

Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you have questions or warranty claims.

CUSTOMER SERVICE

For customer service contact us toll-free at: 1-855-EGO-5656 or EGOPOWERPLUS. COM. EGO Customer Service, 769 SEWARD AVE NW / Suite 102 Grand Rapids, MI 49504

FAQS About EGO Power Plus FN1800 18-Inch Portable Misting Fan

For more manuals by EGO Power Plus, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/EGO-Power-Plus-FN1800-18-Inch-Portable-Misting-Fan-User-Guide.pdf” download=”all”]