EDIFIER X2 True Wireless Earbuds
About Edifier
Edifier specializes in creating high-end audio products that are both technologically advanced and beautifully crafted. Edifier, a company with its headquarters in Beijing, China, was founded in 1996 and offers a variety of home audio, professional audio, vehicle audio, headphones, and microphones for both personal entertainment and business use. In February 2010, Edifier joined the Chinese stock exchange and became the first company listed in the Chinese audio market. In 2010, Edifier was considered the sole Chinese corporation implementing a national trademark strategy.
Power ON/OFF
- Power ON when taken out of the case.
- Power OFF when placed in the case.
Pairing
- They were taken out of the case. Red and Blue LED will blink rapidly.
- Select “EDIFIER X2” in your device setting to connect.
Note: For subsequent use, the earbuds will auto-connect to the device used last time.
Reset
- Taken out of the case.
- Disconnected to any Bluetooth devices. Press and hold the touch panel on the either earbud for around 8s and wait until Blue LED blinks rapidly to reset and turn off. If the left and right earbuds are connected, the other side will reset and turn off either)
- Placed in the case and taken out of the case again.
- Select “EDIFIER X2” in your device setting to connect.
Left & Right connection (Connect to another X2 earbuds)
- Earbuds must disconnect from any devices. Respectively tap 5 times the touch panel on both earbuds to cancel the Left & Right connection. Blue LED will be steadily lit. Upon connection is canceled, place the earbuds back in the case.
- Taken out of the case and disconnected from any devices. Respectively tap 2 times the touch panel on both earbuds to start Left & Right connecting. Blue LED will blink rapidly.
- Upon connection is successful select “EDIFIER X2” in your device setting to connect.
Charge
Earbuds
- When hearing a low battery prompt tone, please place the earbuds in the case for charging.
- Red LED is steadily lit when charging and off when fully charged.
Charging case
- Please connect the case to the power source with the included Type-C charging cable for charging.
- Red LED is steadily lit when charging and off when fully charged.
Input: 5V === 200mA(Earbuds) 5V === 1A(Charging case)
Controls
Note:
- Please do not charge the product when there is sweat or other liquids inside the charging port which may damage the product.
- Images are for illustrative purposes only and may differ from the actual product.
For more information, please visit our website:
- @Edifierglobal
- @Edifier_Global
- @Edifier_Global
Model: EDF200072 Edifier International Limited P.O. Box 6264 General Post Office Hong Kong www.edifier.com ©2022 Edifier International Limited. All rights reserved.
NOTICE: For technical improvement and system upgrades, the information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product. If any difference is found, the actual product prevails.
FAQs About EDIFIER X2 True Wireless Earbuds
How do you tell when the battery in your true wireless earbuds is full?
By observing the battery indicator light, you may determine the condition of the earbuds and charging case. When the earbuds are inserted, the case and earbuds will both charge at the same time. The case can be charged independently of the earbuds. Read all the time: Charging Green all the time: full charge
How long does it take the Edifier X2 to charge?
The time it takes to charge the earbuds from 0% to 100% is about 50 minutes. It takes two hours for the charging case to finish charging. The battery has a total life of 27 hours and can be fully charged three more times using the charging case. The Edifier X2’s charging case contains a Type-C connection, which is its best feature.
Can I charge just the earbud case?
Both with and without the AirPods inside, you may change your case.
How are the batteries in Edifier earbuds checked?
Opening and closing the charging case will automatically display the battery level: Within three seconds, all of the red LED indicators will dim from center to periphery, extend to light up from center to periphery, then switch off. Battery level is shown by the length of the indicator bar.
How are Edifier earbuds operated?
Right earbud volume can be increased by long pressing, while left earbud volume may be decreased by long pressing.
Can wireless earbuds be overcharged?
No, it’s not possible to overcharge wireless earphones. The charging case will stop providing power to the earphones once they are fully charged.
How can I tell when I need to recharge my earbuds?
Close the charging case’s cover after putting the earbuds inside. The battery Light within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state.
How long do earphones need to be charged?
earbuds’ recharging The earphones may be fully recharged in about two hours. If the battery is low, you can extend its life by up to an hour by charging it for 10 to 20 minutes in the charging case.
How long will Edifier take to charge?
FAQs. The SBC and AAC. The Edifier earphones will charge in approximately an hour, and the charging case will charge in approximately two hours.
What does the red earbud light mean?
Your headphones’ red or amber flashing usually indicates that the battery is getting low. A medium battery level shown by an orange light may indicate that you need to charge the headphones in the next few hours. That might also imply that the headphones are charging right now.
For more manuals by Edifier, visit ManualsDock