Edifier S760D Home Speaker System User Manual

Edifier S760D Home Speaker System

About Edifier
Edifier specializes in creating high-end audio products that are both technologically advanced and beautifully crafted. Edifier, a company with its headquarters in Beijing, China, was founded in 1996 and offers a variety of home audio, professional audio, vehicle audio, headphones, and microphones for both personal entertainment and business use. In February 2010, Edifier joined the Chinese stock exchange and became the first company listed in the Chinese audio market. In 2010, Edifier was considered the sole Chinese corporation implementing a national trademark strategy.

Specifications

• POWER OUTPUT: FUFR/C/SL/SR: RMS 60W x 5 (DRC ON) SW: RMS 240W (DRC ON)
• SIGNAL TO NOISE RATIO: >85dBA
• SYSTEM RESPONSE: Satellite: 130Hz ~ 20KHz ( +5dB), Subwoofer: 42Hz ~ 140Hz ( +6dB )
• INPUT SENSITIVITY:1 IN/CD/ AUX: Satellite: 750mV + 50mV, Subwoofer: 900mV + 50mV
• TREBLE UNIT: 25mm silk dome tweeter
• MID-RANGE UNIT: 3½ inch (92mm)
• BASS UNIT: 10 inches (260mm)
• DIMENSION: SW: 367(W) X 397(H) x 489(0) mm, FR/FUSR/SL: 116(W) x 203(H) x 160(0) mm, C: 316(W) X 117(H) X 157(D) mm
• WEIGHT (NET): Satellite: Approx. 11.5 kg, Subwoofer: Approx. 19kg

Introduction

With a ground-shaking output of 540W RMS, the S760D is equipped with Dolby Digital and DTS sound decoders to produce the greatest 5.1 listening experience. While each of the four satellite speakers and the center speaker only output 60W RMS, the enormous 10-inch bass driver and two passive radiators manage to deliver an astonishing 250W RMS. The S760D is a highly adaptable speaker system with many input possibilities for home entertainment, gaming, big room settings, and for both personal and business use. Both a wired and a wireless remote control offer simple volume, input, and trimming adjustments.

Important Safety Instructions

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Thank you for purchasing this EDIFIER product. For generations, EDIFIER has tried to provide powered speaker products to satisfy the needs of our end customers, even the most demanding ones. This product can add to your home entertainment, personal computer, and mini home theater great sound performance. Please read this manual carefully to obtain the best of this system.

The lightning flash with arrowhead inside the triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

WARNING! The unit is of Class I construction and must be connected to a main socket outlet with a protective earthing connection. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

Box contents

Illustrations

1. Speaker output ports
2. 1 CH input connector ports
3. Stereo input connector ports (AUX/CD)
4. Wired controller connector port
5. Coaxial input connector
6. Optical connector ports
7. Master power switch
8. Power cord connector port
9. LCD display window
10. Function dial/master volume dial
11. Standby/ON
12. Audio source selector
13. Headphone port

Operational guide for remote control

1. Indicator
2. Standby/On
3. Mute key
4. 1 CH input
5. Optical input
6. Coaxial input
7. CD input
8. AUX input
9. On/Off: Dolby Pro Logic II On/Off
   • (Only for stereo signal input mode, not available in 5.1 mode.)
10. Music—- Dolby Pro Logic II Music mode
    • Movie—- Dolby Pro Logic II Movie mode
    • Emul—- Dolby Pro Logic II Emulation mode
    • Matrix—- Dolby Pro Logic II Matrix mode
    • Virtual—- Dolby Pro Logic II Virtual mode
    • Game—- Dolby Pro Logic II Game mode
11. Compression On/Off (Effective only for Dolby Digital decoder)
12. Adjustment keys
    • Step 1: press “Fune” repeatedly
    • Step 2: Press ADJ+/ ADJ-.
13. Function navigator
14. Treble adjustment
15. Master volume up/down
16. Bass adjustment
    • Please refer to the figure to open the battery compartment, load the batteries, and shut the compartment.
    • Point the remote controller to the IR window on the wired controller when operating the remote controller.
    • The optimum operational distance is within 7 meters.
    • The optimum operational scope is within a 60-degree angle.

Notice:

1. Do not place the remote in an extremely hot or humid place.
2. Do not use a new battery with an old one.
3. Remove the batteries when the remote is left unused for a long period of time to avoid battery leakage or corrosion.

Adjustment

1. Press the “FUNC” key to access VOL – BASS – TREB – FL – FR – CE – SL – SR – SUB – LIGHT – DELA Ye (unavailable) – DELAYsLtsR adjustments (DELAY setting is only available for Dolby Pro Logic II ON).
2. Rotate the master volume dial or press ADJ+/ ADJ- to adjust: bass/treble, FL/FR/CE/SL/SR/SUB.
3. In play mode, rotate the master volume dial or press VOL+NOL- to adjust the master volume of the system.
4. Master Volume Boost: When the master volume is 60, rotate the master volume dial clockwise quickly to activate the volume boost (not available in headphone mode).
5. Reset: Press & hold the function dial and (!J (on the wired controller) at the same time approximately 2 seconds, the wired controller will display the software version, and then all settings will be erased and will set the system to the original factory default settings.

Connect to the speakers and audio source

• Connect the satellite speaker to the “Speaker Out” port on the rear panel of the subwoofer (golden cable to the red wire clamp, and silver cable to the black wire clamp).
• Connect the audio cable to the 5.1 /PC/ AUX connector ports on the rear panel to your audio source (PC sound card, DVD/MP3/MP4 player, etc.)
• Connect the power cable to the wall socket and turn on the power switch, the system is in on.

Note:

1. Make sure the system is powered off when connecting speakers.
2. Before powering off the speaker, please press the power button to set the speaker to standby mode, and then turn off the system at the master power switch.

Place the satellite speakers

To achieve the best surround effect, all speakers should be of a similar distance from the listening spot.

If your room is shaped like a horizontal rectangle, we suggest you arrange the speakers in the way shown in Figure A. If your room is a vertical rectangle, we suggest you arrange the speakers in the way shown in Figure B.

Power on/Standby

1. Connect the power cord to the wall socket, and turn on the power switch, the system is on;
2. Rotate the function dial (or use the remote control) to adjust the master volume and other settings;
3. In playing mode, press & hold (!) for approximately 2 seconds to set the system into standby mode, The LCD display of the wired controller will turn off;
4. Press power to set the system back to playing mode.

Optical input

1. Press the “INPUT” button on the wired controller until the LCD displays “OPT11 or press the “OPT11 key on the remote control.
2. Connect the “OPT11 connector port to your audio source (DVD, etc.) using the fiber optical cable.
3. Play the music on the connected device and adjust the settings to a desired level.

Note: Only the standard PCM audio signals (44. l/48/96KHz) of the sampling clock are adaptable in optical mode.

Coaxial input

1. Press the “INPUT” button on the wired controller until the LCD displays “COX”, or press the “COX” key on the remote control.
2. Connect the “COX” connector port to your audio source with the coaxial cable.
3. Play the music on the connected device and adjust the settings to a desired level.

CD INPUT

1. Press the “INPUT” button on the wired controller until the LCD displays “CD”, or press the “CD” key on the remote control to select CD input.
2. Connect the “CD” connector ports to your CD player with the audio connecting cable.
3. Play the music on the connected device and adjust the settings to a desired level.

5.1 INPUT

1. Press the “INPUT” button on the wired controller or the “5.1 CH” key on the remote control until the LCD displays “5.1 CH”.
2. Connect the “5.1 CH” connector ports to your device with the 3.5mm-dual RCA audio cable.
3. Play the music on the connected device and adjust the settings to a desired level.
   • Dual RCA-Dual RCA audio cables are needed if you want to play music through certain devices.

AUX INPUT

1. Press the “INPUT button on the wired controller until the LCD displays “AUX” or press the “AUX” key on the remote control to select AUX input.
2. Connect the “AUX” connector ports to your audio source (MP3/MP4 player, etc.) with the audio connecting cable.
3. Play the music on the connected device and adjust the settings to a desired level.

Troubleshooting

• Switch the EDIFIER S760D off then on and reconnect to the audio source.
• Ensure the devices are workable and connected correctly.
• Check if power is connected, and if the wall outlet is switched on.
• Check if the master volume is turned to a minimum.
• Check if the system is on standby.
• Check if the audio input cable is connected correctly.
• Check if there is a signal from the audio source.
• Check if the batteries are available.

FAQs About Edifier S760D Home Speaker System

For More Post Visit: Manuals Dock