Cerwin Vega XED693 350W Max 45W RMS 3-Way Coaxial Speaker
About Cerwin Vega
Aerospace engineer Eugene J. “Gene” Czerwinski (1927–2010) founded Cerwin-Vega in 1954 under the name Vega Associates (later renamed Vega Laboratories and finally Cerwin-Vega). The company gained notoriety for creating an 18″ speaker that could produce 130 dB in SPL at 30 Hz, an incredible level at the time.
Introduction
Cerwin Vega Mobile Speakers
Congratulations on purchasing Cerwin Vega Mobile speakers for your car audio system. You have chosen Cerwin Vega Mobile because you deserve the best!
Cerwin Vega Mobile speakers are designed and engineered to reproduce great sound quality for many years of listening enjoyment in your vehicle! We highly recommend that your new speakers be installed by an authorized Cerwin Vega Mobile dealer. Your authorized dealer can professionally assemble/disassemble the interior of your vehicle and set the proper speaker placement for ideal sound quality.
If you decide to install the speakers by yourself, please thoroughly read through this manual before getting started. This manual will help familiarize yourself with these speakers and guide you through the installation process and procedures.
Please contact your local authorized Cerwin Vega Mobile dealer if you have any questions regarding the instructions in this manual. If you require additional assistance, please contact the Cerwin Vega Mobile Technical Support Department during business hours at 213-261-4161.
Features/Specs
XED 693 – 6” X 9” – 3 Way
- 350 Watts MAX
- Curvilinear Poly Cone
- Butyl Rubber Surround
- Balanced Metal Dome 2.5” MidRange
- Balanced Piezo Metal Dome .75” CV Tweeter
- Black Coat Stamped Steel Basket
- Signature Cerwin-Vega Sound!
- Grills and Hardware
XED62 – 6.5“ – Co-Axial
- 300 Watts MAX
- Curvilinear Poly Cone
- Butyl Rubber Surround
- Balanced Metal Dome .75” CV Tweeter
- Black Coat Stamped Steel Basket
- Signature Cerwin-Vega Sound!
- Grills and Hardware
XED52 – 5.25“ – Co-Axial
- 275 Watts MAX
- Curvilinear Poly Cone
- Butyl Rubber Surround
- Balanced Piezo Metal Dome .75” CV Tweeter
- Black Coat Stamped Steel Basket
- Signature Cerwin-Vega Sound!
- Hardware
XED42 – 4” – Co-Axial
- 250 Watts MAX
- Curvilinear Poly Cone
- Butyl Rubber Surround
- Balanced Piezo Metal Dome .75” CV Tweeter
- Black Coat Stamped Steel Basket
- Signature Cerwin-Vega Sound!
- Hardware
XED650C – 6.5“ – Component
- 300 Watts MAX
- Curvilinear Poly Cone Midrange
- Butyl Rubber Surround
- Black Coat Stamped Steel Basket
- Balanced Metal Dome 0.5” CV Tweeter
- High-Grade External Crossover Network
- Signature Cerwin Vega Sound!
- Grills and Hardware
XED525C – 5.25“ – Component
- 300 Watts MAX
- Curvilinear Poly Cone Midrange
- Butyl Rubber Surround
- Black Coat Stamped Steel Basket
- Balanced Metal Dome 0.5” CV Tweeter
- High-Grade External Crossover Network
- Signature Cerwin Vega Sound!
- Hardware
Installation
Installing the Speakers
Your new Cerwin Vega Mobile series speakers were designed with the flexibility to be installed in multiple locations. However, to ensure the best performance possible, it is important to isolate the front sound waves of the speaker from its rear sound waves. This is done by securely mounting the speaker to a flat surface known as a baffle. Make sure to seal the speaker to ensure there are no air leaks around its frame.
Rear Deck Mounting
There are two primary methods for mounting speakers in the rear deck of a vehicle, top and bottom mounting. Top mounting requires dropping the speakers in through the deck (interior) while bottom mounting secures the speakers from underneath (trunk). Either method requires a good seal around the frame for the best performance.
Tweeter Installation
When flush or surface mounting tweeters, make sure the desired location can accommodate the hole sizes and depth required. The tweeter can also be surface mounted atop the dash, door, or rear deck. Mount cup using the provided hardware, flush mount illustration shown below. The flush mount bezel requires cutting a 1.75” (45mm) round opening. Be sure there is AT LEAST 1 INCH (25.4mm) behind the panel so the tweeter has adequate clearance. Remember when using a hole saw the thickness of the saw teeth will add to the cut diameter. Mount the surface cup at the desired angle with provided screws in the tweeter mounting kit. Route speaker wires through the tweeter cup, connect the tweeter to wires, and snap the tweeter into the cup by aligning the notches in the tweeter cup with the notches in the tweeter base. Be careful not to push on the center of the tweeter grill.
Crossover Installation
Install in a well-ventilated area whenever possible. If you must install the passive crossovers in the doors due to the use of factory wiring. As you “feed” into the door cavity, ensure that the crossover is installed behind the door panel instead of inside the door itself. This will offer the greatest capacity for avoiding any water damage caused by rain or moisture. Also, avoid placing it near factory wiring looms to ensure no radiated noise problems. Connect the input side labeled “AMP” of each passive crossover to the amplifier’s speaker output terminals. Be sure to observe the correct polarity for positive and negative terminals. Next, connect the middle terminals labeled “MID” to the midrange speaker. Be sure that the wiring is protected to the terminal and that the wires are secure at both the speaker and passive crossover. Finally, connect the end terminals on the far right-hand side labeled “TWT” to the tweeter. Be careful to observe the correct polarity when connecting the tweeter to its lead wires as these are smaller gauges and require care and patience to connect correctly.
Specifications
Warranty
Thank you for purchasing a Cerwin Vega Mobile product and we hope to provide you with countless hours of listening enjoyment. Please take a brief moment to register your new product. By registering your new product, you will receive benefits such as:
- Important product notifications that may pertain to your purchase.
- Confirmation and record of ownership in case of loss or theft.
- Knowledgeable customer service and technical assistance about your product.
Register your new product by filling out this Product and Warranty Registration card or register online at www.cerwinvegamobile.com. Registration is voluntary and failure to register will not diminish your limited warranty rights.
Limited Warranty (U.S.A.)
- Cerwin Vega Mobile warrants all of our amplifiers and speakers to be free of defects in materials and workmanship for one (1) year.
- This warranty is non-transferable and applies only to the original purchaser from an authorized Cerwin Vega Mobile dealer. If service is required and necessary under this warranty due to manufacturing defect or malfunction, then Cerwin Vega Mobile will repair and/or replace the defective product with either a new or remanufactured product at no charge at our discretion.
- Damage to the product caused by the following will not be covered under this warranty: abuse, accident, misuse, neglect, modifications, repair attempts, or seller/installer misrepresentation.
- This warranty does not cover any incidental, consequential, or cosmetic damage due to accidents or normal wear and tear, nor does it cover the cost of removing or reinstallation the product.
- The warranty is void if the product’s serial number has been removed, defaced, and/or tampered with.
Warranty Procedure:
We recommend that you contact your Cerwin Vega Mobile authorized dealer where your original purchase was made to initiate all warranty claims. Our authorized dealers can guide you through the warranty procedure to ensure that your claim will be processed promptly. All warranty returns must be accompanied by a proof of purchase (a copy of the original sales receipt) and be shipped freight prepaid to our facility with an RA (Return Authorization) number marked on the outside of the package. Direct returns from consumers or non-authorized dealers will be refused if shipped without a valid RA number authorized by Cerwin Vega Mobile beforehand.
INTERNATIONAL
Products purchased outside of the U.S.A. are covered only by that country’s distributor and not by Cerwin Vega Mobile U.S.A.
Please Ship All Warranty Claims With Pre-Authorized RA Number To:
- CV&DA Holdings, Inc. ATTN: Customer Service Department 1225 E. 7th St. Los Angeles, CA 90021 USA
- Please Contact Customer Service for Further Warranty Information: U.S.A.
- Tel: 213-261-4161 /
- Fax: 213-947-4767
FAQS About Cerwin Vega XED693 350W Max 45W RMS 3-Way Coaxial Speaker
1. What size are the speakers?
The Cerwin Vega XED693 speakers are a standard 6″ x 9″ size, commonly used in car audio.
2. What is the maximum power output?
The XED693 boasts a 350W maximum power rating, indicating its peak handling capability.
3. What is the RMS power rating?
The RMS power rating, representing continuous power handling, is 45W per speaker.
4. How many drivers does each speaker have?
The XED693 is a 3-way coaxial speaker, meaning it has three separate drivers for different frequency ranges: * 6.5″ woofer for low frequencies * 1.75″ midrange for middle frequencies * 0.75″ dome tweeter for high frequencies
5. Are these speakers weatherproof?
While not specifically advertised as weatherproof, the XED693 speakers are designed for car audio and have some resistance to moisture and dust. However, they are not ideal for prolonged exposure to harsh weather conditions.
6. Can I mount these speakers on a boat?
While technically possible, it’s not recommended to mount these speakers on a boat unless they are installed in a protected location and exposed to minimal water spray.
7. Do these speakers need an amplifier?
Yes, the XED693 speakers are passive and require an external amplifier to operate.
8. What amplifier is recommended for these speakers?
A 2-channel amplifier with a power output of at least 45W RMS per channel is recommended for optimal performance.
9. Are these speakers good for home theater?
While primarily designed for car audio, the XED693 speakers can be used for home theater surround sound as long as they are properly matched with other speakers and an appropriate amplifier.
10. What is the warranty on these speakers?
The Cerwin Vega XED693 speakers come with a 1-year warranty against manufacturing defects.
For more manuals by Cerwin Vega Manuals Dock