allen roth Granite Kitchen Sink
About Allen Roth
A well-known name in home furnishings, Allen Roth is known for producing elegant and premium furniture, lighting, and accessories. The company was established in 2009 and sells its products only online and in-person at Lowe’s Home Improvement locations. Modern, contemporary, traditional, and transitional are just a few of the styles and preferences that Allen Roth’s extensive product selection caters to. Their goods are renowned for their high caliber, meticulous attention to detail, and competitive pricing.
Information
Allen & Roth and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
| A | Single Bowl Sink | 1 |
| B | 2-in-1 Template | 1 |
| PART | DESCRIPTION | QUANTITY |
| A | Double Bowl Sink | 1 |
| B | 2-in-1 Template | 1 |
HARDWARE CONTENTS
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install this product.
WARNING
- Keep all packaging materials out of the reach of children to prevent possible choking or suffocation.
- Use caution when installing the sink. There is a risk of crushing your fingers when inserting the sink into the installation location.
CAUTION: NEVER place hot objects such as hot pans on the sink. Wait until the object has cooled or use a heat-resistant plate when placing hot objects on the sink surface.
NOTICE
- Avoid leaving wet sponges, salt, and corrosive substances on the sink for long periods of time. Lines and scratches may be caused by improper use of the sink.
- DO NOT place the sink on its side as there is a risk of damage.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PREPARATION
Before beginning the installation of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to install the product.
Estimated Installation Time: 30 minutes. Tools Required for Installation (not included): jigsaw, silicone sealant, Phillips screwdriver, hammer, flathead screwdriver, tungsten rasp, safety goggles, pencil.
INSTALLATION INSTRUCTIONS
TOPMOUNT
Preparing the installation location
If necessary, disconnect the water supply lines underneath the sink and remove the old sink. Place the 2-in-1 template (B) on the sink installation location. Using a pencil, mark the correct location on the sink. Using a jigsaw, cut out the location for the sink.
Preparing the sink for installation
Please skip this step unless additional holes are necessary for your faucet and/or accessories. Gently place the sink into the countertop cut out to support the outer edge of your sink. With a flathead screwdriver and hammer, proceed to punch out holes. Finish the hole with a small tungsten rasp and remove the stickers on the sink for any pre-marked holes not needed.
Note: A round sticker on the sink indicates where the knock-out holes have been prepared. Check that this sticker has not been moved. Also, note that one hole has already been prepared.
CAUTION: DO NOT turn the sink over in order to push out the pre-scored hole on the sink. This will damage the sink. Punch out the pre-scored hole as shown.
Installing the mounting brackets
Turn the sink over and press the mounting clips (AA) into the pre-drilled holes along the rim of the sink (A) until they are flush with the base of the sink (A). Hammer in the spreader bolts on both sides of the mounting clips (AA) as far as the stop, using either a screwdriver or hammer. Apply silicone sealant (not included) along the edge of the sink (A).
Hardware Used
Installing the sink
Place the sink (A) into the countertop and remove any excess sealant that comes out from the edges. Tighten the screws on the mounting clips (AA) underneath the sink to anchor the sink (A).
UNDERMOUNT
Preparing the installation location
If necessary, disconnect the water supply lines underneath the sink and remove the old sink. Using a pencil mark the measurements (from the insets) on the sink location. Using a jigsaw, cut out the location for the sink.
Preparing to mount the sink
From underneath the countertop, prepare 30 mm holes around the perimeter of the installation location. A typical installation will have two holes at each corner of the sink. Place the threaded nuts (DD) securely into each of the holes underneath the counter.
Hardware Used
Mounting the sink
From underneath the countertop, apply silicone sealant around the perimeter of the installation location. Place the sink (A) underneath the countertop by inserting mounting screws (BB) through the mounting brackets (CC) and into the installed threaded nuts (DD). Tighten the screws in a crisscross pattern to ensure that the sink is installed evenly underneath the counter.
FAQs allen roth Granite Kitchen Sink
Do allen roth Granite Kitchen Sink easily scratch?
High pressure is used to manufacture quality composite granite sinks, which makes them nonporous, sanitary, and resistant to heat, stains, scratches, and chips.
Do allen roth Granite Kitchen Sinkreadily get stained?
Advantage: Stain Resistant This is a benefit that isn’t really up for debate. Granite composite is resistant to stains, in contrast to some countertop and sink materials. There is little area for stains to seep in because it is non-porous and densely packed.
How should a allen roth Granite Kitchen Sink be maintained?
We advise using any non-abrasive cleaner for general cleanings, such as Bar Keeper’s Friend, Soft Scrub/Soft Scrub with Bleach, or regular liquid dish soap. Rinse and dry the sink with a clean, soft towel to get rid of any water stains or soap film buildups.
Which sink type complements granite the best?
With kitchen countertops made of granite and quartz, stainless steel sinks are by far the most popular. They do not rust, chip, or discolor, and they are simple to clean and maintain. They complement the majority of faucets.
Why is the breaking in my granite sink?
Usually, tension from handling, manufacture, shipment, or installation of the countertop causes cracks in granite or stone surfaces. But, the fact that the majority of granite cracks are found in a single location, near the sink cutout, seems to be highly strange.
Can you use bleach in granite sinks?
Bleach: Although bleach is an excellent disinfectant, it can diminish your granite’s polish and, in some cases, even affect its color of it. When cleaning your granite, stay away from bleach and other products that include it because there are other, safer ways to disinfect your stone.
What is causing the whitening of my granite sink?
Deposits of Hard Water Minerals (Calcium, Magnesium, Lime) If water is left in your sink after each use, it will ultimately evaporate unless you wipe it dry. Minerals such as calcium, magnesium, and lime are left behind as water evaporates and adheres to the surface. These patches are termed mineral deposits.
Do granite sinks require maintenance?
While a granite composite sink is durable and largely damage-resistant, it still needs routine maintenance.
How is granite fastened to a kitchen sink?
The majority of under-mount sinks come with clips to secure them to your countertop’s underside. For some installations of under-mount kitchen or bathroom sinks, clips are not necessary. Furthermore, brackets and two-part epoxy are options. For a stronger hold, you might combine several attachment techniques.
What type of granite is ideal for a kitchen?
White granite is the material of choice in a classical kitchen since it is pure and undeniably classic.
For more manuals on Allen Roth, visit ManualsDock