Armor All AA255 Vacuum Cleaner User Manual

Armor All AA255 Vacuum Cleaner

About Armor All
Armor All is a brand of car care products that was first introduced in 1962. The company produces a wide range of products designed to clean, protect, and enhance the appearance of car interiors and exteriors. Some of the most popular Armor All products include tire shine, car wash soap, leather care products, and dashboard protectants.

SAFETY INSTRUCTIONS & WARNINGS

IMPORTANT SAFETY INSTRUCTIONS Read and understand all instructions before using this vacuum Read and understand this owner’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert, and knowing how your vacuum works. Use this Wet/Dry Vac only as described in this manual. Household Type

SAVE THIS MANUAL FOR FUTURE REFERENCE.

When using an electrical appliance, basic precautions should always be followed including the following:

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

• Do not run vac unattended.
• Do not vacuum, or use this Wet/Dry Vac near flammable liquids, gases, or explosive vapors like gasoline or other fuels, lighter fluids, cleaners, oil-based paints, natural gas, hydrogen, or explosive dust like coal dust, magnesium dust, grain dust, or gun power. Sparks inside the motor can ignite flammable vapors or dust.
• Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Keep the cord away from heated surfaces.
• Do not expose to rain. Store indoors.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not use a damaged cord, plug, or other parts.
• If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners.
• Do not run the Wet/Dry Vac over the cord.
• Do not handle the plug or the Wet/Dry Vac with wet hands.
• To reduce the risk of health hazards from vapors or dust, do not vacuum toxic materials.
• Do not use or store hazardous materials.
• Do not use this Wet/Dry Vac with a torn filter or without the filter installed except when vacuuming liquids as described in the operation section of this manual.
• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
• To reduce the risk of injury from accidental starting, unplug the power cord before changing or cleaning the filter.
• Do not leave the Wet/Dry Vac unattended when plugged in. Unplug from the outlet when not in use and before servicing.
• Turn off the Wet/Dry Vac before unplugging.
• Do not put any objects into ventilation openings. Do not vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• To reduce the risk of falls, use extra care when cleaning stairs.

When using as a blower:

• Direct air discharge only at the work area.
• Do not use a Wet/Dry Vac as a sprayer.
• Do not direct air at bystanders.
• Keep children away when blowing.
• Wear safety goggles.

DOUBLE INSULATION INSTRUCTIONS

This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacement parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac.

DOUBLE INSULATED – GROUNDING NOT REQUIRED – WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK-DO NOT EXPOSE TO RAIN. STORE INDOORS.

WARNING: FOR YOUR OWN SAFETY, READ AND UNDERSTAND THE OPERATOR’S MANUAL. DO NOT RUN UNATTENDED. DO NOT PICK UP HOT ASHES, COALS, TOXIC, FLAMMABLE, OR OTHER HAZARDOUS MATERIALS, AND DO NOT USE THEM AROUND EXPLOSIVE LIQUIDS OR VAPORS.

CAUTION:

• Do not vacuum drywall dust or fireplace soot or ash with a standard Wet/Dry filter. This type of dust is very fine and may not be captured by the filter and cause damage to the motor. When vacuuming fine dust use a fine dust filter.
• DO NOT use without filters in place.

EXTENSION CORDS

When using an extension cord with your Wet/Dry Vac refer to the following table to determine the required A.W.G. wire size. Before using the cleaner make sure the power cord and extension cord are in good working condition. Make repairs or replacements before using the vacuum cleaner. Only use extension cords that are rated for outdoor use.

	Length of Extension Cord
110V-120V	25 Feet   7.5 Meter	50 Feet   15.25 Meters	100 Feet   30.5 Meters	150 Feet   45.7 Meters
Amps	A.W.G Wire Size
0-6	18	16	16	14
7-10	18	16	14	12
11-12	16	16	14	12
13-16	14	12	Not recommended

UNPACKING AND CHECKING CARTON CONTENTS

Remove the entire contents of the carton. Check each item against the carton contents.

Carton Contents List

Key / Description / Qty

• Vac Assembly……………………….…..1
• Hose…………………………..………..1
• Base Assembly ……………..……..…1
• 2-In-1 Utility Nozzle with Brush……..1
• Crevice Tool …………..…………………1
• Deluxe Car Nozzle…………………………1
• Floor / Squeegee Nozzle………………1
• Round Dust Brush…………..……….1
• 4 Screws (Bag)……………………….1
• Extension Wand………………………1
• Blower / Adaptor Nozzle…………….1
• Detail Brush Nozzle…..………………..1
• Foam Sleeve Filter……………………..1
• Reusable Cloth Filter…………….…….1
•  Operator’s Manual ……..……………..1

NOTE: The hose and accessories for this vacuum are 1.25 inches (3.18 cm) in diameter.

GENERAL ASSEMBLY INSTRUCTIONS

WARNING: DO NOT PLUG IN THE POWER CORD TO THE POWER OUTLET, MAKE SURE THE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC

UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY

1. Verify that the power cord is disconnected from the outlet.
2. Undo the latches.
3. Lift the power head off the container.
4. Remove the contents from inside the container, and make sure you have all contents as listed on page 5.
5.  For dry vacuum cleaning, install the supplied reusable cloth filter. See page 10 for filter installation.
6. For wet vacuum cleaning, install the supplied foam filter.  See page 10 for filter installation.
7.  Turn the container upside down and fit the base assembly onto the tank. Secure the base to the tank with the supplied screws. Verify that the base is assembled correctly. Do not over-tighten the screw.
8. Place the power head back on the container, align the top section with the latches, and snap it into place.
9. Insert the larger end of the hose into the desired port.
10. Choose the desired accessories and insert them onto the end of the hose.

POLARIZED PLUG To reduce the risk of electrical shock, this appliance has a double polarized plug (one with the blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Double insulation eliminates the need for the three-wire grounded power cord and grounded power supply system.

DRY VACUUM OPERATION

WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUST IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT-TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUST INCLUDES BUT IS NOT LIMITED TO; COAL, MAGNESIUM, GRAIN, OR GUNPOWDER. TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.

1. Verify that the power cord is disconnected from the outlet.
2. In order to prepare your vacuum for dry vacuuming, make sure the filter is completely covering the filter cage against the power head. (Your Wet/Dry Vac comes with the reusable cloth filter pre-installed, if not, see page 10 for installation instructions.)
3. Place the power head section back on the container, and secure it in place using the latches.
   OPERATING INSTRUCTIONS: DRY VACUUMING
4. Insert the larger end of the hose into the vacuum port on the tank. Push the required attachment onto the free end of the hose or extension.
5. Plug the power cord into the outlet.
6. Turn the motor on by flipping the switch to the ‘I’ ON position and begin vacuuming.
7. Once you have completed vacuuming, flip the switch to the ‘O’ OFF’ position and unplug the power cord from the outlet.

O = OFF I = ON DO NOT USE THE REUSABLE CLOTH FILTER FOR LIQUID VACUUMING.

LIQUID VACUUM OPERATION

WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUST IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT-TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUST INCLUDES BUT IS NOT LIMITED TO; COAL, MAGNESIUM, GRAIN, OR GUNPOWDER. TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.

WARNING: MAKE SURE THE PLUG IS DISCONNECTED BEFORE CHANGING THE FILTERS

1. Verify that the power cord is disconnected from the outlet.
2. Remove the reusable cloth filter, then carefully install the foam sleeve filter over the filter cage and place the power head back on the container. See filter installing instructions on page 10.
   DO NOT USE THE REUSABLE CLOTH FILTER FOR LIQUID VACUUMING.
   OPERATING INSTRUCTIONS – WET VACUUMING
3. Fit the desired nozzle to the vacuum hose.
4. Verify that the switch is in the ‘O’ OFF’ position before plugging the power cord into the outlet.
5. Turn the motor on by flipping the switch to the ‘I’ ON position.
6. After use, empty the container, and clean and dry the inside and outside before storage.

IMPORTANT! When vacuuming large quantities of liquids, do not immerse the nozzle completely in the liquid; leave a gap at the tip of the nozzle opening to allow air inflow. The machine is fitted with a float valve that stops the suction action when the container reaches its maximum capacity. You will notice an increase in motor speed. When this happens, turn off the machine, disconnect from the power supply, and drain the liquid into a suitable receptacle or drain.

To continue vacuuming, refit the power head to the container. After wet vacuuming, turn the machine off and remove the plug from the power supply. Empty the container, and clean and dry the inside and outside before storage.

REMEMBER! The foam filter must be removed after wet vacuuming, and a reusable cloth filter must be installed before dry vacuuming again.

BLOWING OPERATION

This Wet/Dry Vac has blowing capabilities only when the hose is inserted into the blowing port. To use the blower feature follow the instructions listed.

WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING THE BLOWER.

WARNING: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.

WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED.

1. Verify that the power cord is disconnected from the outlet.
2. Make sure the container is empty before using it as a blower.
3. Remove the hose from the vacuum port.
4. Insert the larger end of the hose into the blowing port on the back side of the power head.
5. Fit the desired attachment to the hose.
6. Ensure the power switch is turned off and plugged into the power supply.
7. Before turning on the vac, firmly hold the loose end of the hose. Turn the motor on by flipping the switch to the ‘I’ ON position.

MAINTENANCE

1. Verify that the power cord is disconnected from the outlet.
2. Disconnect the hose from the vacuum.
3. Undo the latches and remove the power head from the container.
4. Clear all dirt or debris from the container and hose.
5. Clean or replace the filters.
6. Check the hose, attachments, and power cord to verify that they have not been damaged.

IMPORTANT! Clean or change the dust filter regularly for best performance. ALWAYS USE DUST

FILTER FOR DRY VACUUMING. If the machine is used without the dust filter, the motor will burn out and the warranty will be voided. Always keep spare filters on hand.

NOTICE! The filter included is made of high-quality material designed to stop small dust particles. The filter should be used for dry pick-up only. A dry filter is necessary to pick up dust. If the dust filter is wet, it will clog quickly and be very difficult to clean.

Handle the filter carefully when removing it for cleaning and replacing it. Check the filters for tears or small holes, a small hole can let dust pass through and out of the cleaner. Do not use a filter with holes or tears, replace it immediately.

WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING THE POWER HEAD FROM THE CONTAINER.

INSTALLING & CLEANING REUSABLE CLOTH FILTER

1. Installing a Reusable Cloth Filter
2. Verify that the power cord is disconnected from the outlet.
3. Remove the power head and place in an upside-down position.
4. Slide the reusable cloth filter down over the filter cage making sure the whole cage is covered.
5. Replace the power head on the container.

Removing and Cleaning Reusable Cloth Filter

1. With the removed power head in the upside-down position.
2.  Carefully remove the reusable cloth filter from the filter cage. Clean the filter by gently tapping or brushing dirt off. Cleaning should not be done indoors in living areas.
3. Use a mild soap and water solution to wash the reusable cloth filter and rinse with clean water.
4.  Allow the wet filter to air dry for 24 hours before installing it onto the filter cage.

TROUBLESHOOTING

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE TROUBLESHOOTING

Symptom	Possible Causes	Corrective Action
The vacuum will not operate	1) No power supply.	1) Check the power supply – cord, breakers, and fuses.
	2) Faulty power cord.	2) Unplug and check the power cord. If damaged, have it repaired   by a professional?
	3) Container full.	3) Empty container.
Dust comes from the motor cover.	1) The reusable cloth filter is missing or damaged.	1) Attach or replace the reusable cloth filter.
Reduced efficiency and motor/speed vibration.	1) There is a blockage in the nozzle, hose, or vacuum inlets. Or the dust filter is blocked by fine dust.	1) Check the nozzle, hose, and inlets for blockage. Take off the filter and clean it. Or install a new filter.

EXPLODED VIEW AND PARTS LIST

FAQs About Armor All AA255 Vacuum Cleaner

 

For more manuals by Armor All, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/04/Armor-All-AA255-Vacuum-Cleaner.pdf” download=”all”]