TaoTronics SoundLiberty 80 Wireless Earbuds User Manual

TaoTronics SoundLiberty 80 Wireless Earbuds

PACKAGE CONTENTS

1. Tao Tronics True Wireless Stereo Earbuds (TT-BH080)
2. 1 x USB-C Charging Cable
3. 1 x User Guide
4. 1 x Quick Start Guide

PRODUCT DIAGRAM

1. Multifunction Touch Control
2. Charging Contacts
3. Microphone
4. Charging Slot
5. Charging Case
6. Charging Indicator
7. Reset Button
8. USB-C Charging Port

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

Hearing Safety

• Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
• Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
• Do not set the volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer phone calls via this device while driving.
• For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers.
  Warning:
  Please set the volume to the proper level to avoid hearing damage.

Caution

• Do not expose this product to high temperatures.
• Do not immerse the earbuds in water or expose them to humidity for a long time.
• Do not clean the product with detergent containing alcohol, ammonia, benzene, or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not in use and keep them away from children and pets to avoid choking hazards.
• Unauthorized disassembly of any parts of this product is forbidden, which may cause a fire hazard, warranty avoidance, and/or property loss.
• Close attention is needed when using near children.
• Keep the charging case away from water, rain, or any other liquid.
• Don’t use the product in thunderstorms to avoid malfunction or electric shock.
• Always ask a professional technician or authorized personnel for repair.

WEAR YOUR EARBUDS
Please wear the earbuds as shown below (Fig. 3).

Bluetooth Caution

• When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
• The maximum effective Bluetooth range may vary with the environmental circumstances.
• When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.

USING YOUR EARBUDS

Charging the Earbuds

• Put the earbuds into the charging case. (Fig. 4).
• Cover the lid and charging will start automatically (Fig. 5).

Note:

• Please fully charge the earbuds when using them for the first time.
• When the battery is low, a “Battery low” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
• Charge the earbuds at least once every 3 months when not using them for a long time.

Charging the Charging Case

1. Connect the charging port with any USB charging adapter or active computer USB port (Fig. 6).
2. The charging indicator will flash slowly in white, and turn solid once fully charged.
   Note:
   Unplug the charging cable (timely) when fully charged.

Pairing

• You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid to turn on the earbuds, they will connect automatically and then enter pairing mode.
2. Turn on the Bluetooth function on your device and search for nearby devices. Find “TAOTRONICS SoundLiberty 80” in the searching results, and the name ta cannot.

Note:

• The earbuds can remember the devices paired previously and will attempt to pair with the last connected device. If re-pairing fails, the earbuds will enter pairing mode.
• It is not recommended to wear the two earbuds on different people. If necessary, please keep the two earbuds close to each other in couple earbuds mode.

Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing history as instructed below:

1. If you have paired your device with the earbuds before, remove “TAOTRONICS SoundLiberty 80” from the Bluetooth device list first.
2. Uncover the lid and make sure both earbuds are placed in the charging case.
3. Press and hold the Reset Button at the back of the charging case for 10 seconds until the indicator flashes white three times. The pairing history is then cleared.
4. The earbuds will enter pairing mode automatically.
   Note:
   If you want to pair the earbuds with another device when already paired, place both earbuds in the charging case and press the Reset Button twice to disconnect the currently paired device. The earbuds will then enter manual pairing mode.

VOICE CONTROL

TAOTRONICS SoundLiberty 80 supports hands-free voice control. You can directly control your earbuds with simple voice command keywords.

Note:
The wake-up rate may be affected when using voice control in a noisy environment.

OPERATION AND FUNCTIONS

CLEANING AND MAINTENANCE

1. Clean the earbuds and the charging case regularly.
2. Use a dry and soft cotton cloth to wipe the unit.
   Note:
   Do not insert anything into the product.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

WARRANTY AND SERVICE

If any problems occur, please contact the TaoTronics Customer Care Centre via the contact information listed in this User Guide.

FOR MORE MANUALS BY TAO TRONICS, VISIT MANUALSDOCK