SteelSeries Arctis 1 Wireless Gaming Headset for Xbox User Manual

SteelSeries Arctis 1 Wireless Gaming Headset for Xbox

About SteelSeries
SteelSeries is a Danish company that designs and manufactures gaming peripherals and accessories, including gaming mice, keyboards, headsets, mousepads, and controllers. The company was founded in 2001 and has since become a popular brand among gamers worldwide. SteelSeries prides itself on its use of high-quality materials and advanced technology to create products that enhance the gaming experience. The company has collaborated with professional gamers to develop products that are tailored to the needs of serious gamers, including features such as programmable buttons, customizable RGB lighting, and advanced sensor technology.

Some of SteelSeries’ most popular products include the Rival gaming mouse series, the Apex gaming keyboard series, and the Arctis gaming headset series. The company has also developed a software platform called SteelSeries Engine that allows users to customize their gaming peripherals and create personalized settings for different games. Arctis 1 Wireless User Manual

STEELSERIES ENGINE

Download SteelSeries Engine to customize your audio settings and to integrate with Engine Apps (like Discord): steelseries.com/engine

PACKAGE CONTENTS

• Arctis 1 Wireless Headset
• USB-C Wireless Dongle
• USB Charging Cable
• USB-C to USB-A Adapter Cable
• ClearCast Microphone

SYSTEM REQUIREMENTS // COMPATIBILITY

• Xbox One
• PC
• PlayStation 4
• Nintendo Switch
• Android (with USB-C)
  • While the Galaxy Note 10 is fully supported, older Samsung phones do not support chat functionality over USB

PRODUCT OVERVIEW

1. ClearCast Microphone
2. Airweave Ear Cushions
3. USB-C Wireless Dongle
4. Mode Switch
5. USB-C to USB-A Adapter Cable
6. 3.5 mm Audio Cable
7. Micro-USB charging Cable
8. Power Button
9. Power LED
10. Microphone Jack
11. Micro-USB Jack
    • for charging and firmware updates
12. 3.5 mm Audio Jack
13. Volume Wheel
14. Microphone Mute Switch

SETUP

XBOX ONE Set the Mode Switch 4 of the USB-C Wireless Dongle 3 to Xbox.

WINDOWS, SWITCH, PS4 Set the Mode Switch 4 of the USB-C Wireless Dongle 3 to USB.

CHARGING

To charge the headset, connect the micro-USB charging cable 7 to the micro-USB jack 11 on the headset, and plug the other end into any USB power source. The color of the power LED 9 indicates the battery level.

• Green 100–50 %
• Yellow 49–15 %
• Red 14–5 %
• Red (fast blink) 4–1 %

POWER ON/OFF

ON To power on the headset press and hold the Power Button 8 for at least 2 seconds. You will hear a tone, and the power LED 9 will illuminate. OFF To power off the headset press and hold the Power Button 8 for at least 3 seconds

PAIRING

Note: The headset is already paired with the transmitter out of the box

1. Connect the USB-C wireless dongle 3 to a Windows PC with SteelSeries Engine installed
2. Initiate wireless dongle pairing from Engine
3. With the headset off, press and hold the Power Button 8 for 6 seconds
4. You will hear a tone when the pairing is completed.

MICROPHONE

Microphone attachment

Position the microphone close to the corner of your mouth with the flat surface facing you

MULTIMEDIA CONTROL

• Answer/end voice call single · press Power Button 8
• Play/pause music single · press Power Button 8
• Next track double · · press Power Button 8
• Previous track triple · · · press Power Button 8

REGULATORY

Europe – EU Declaration of Conformity Hereby, SteelSeries ApS. declares that the equipment is in compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community. The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/OperatingTemperature: 0 to + 40 °C SteelSeries ApS.

hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products. Frequency bands and Powers (Headset and Transceiver) Arctis 1 Wireless User Manual

• a. Frequency band(s) in which the radio equipment operates: 2.400–2.4835 GHz
• b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
  • EIRP:л/4-DQPSK: 5.35 dBm (Headset ANT 1)
  • EIRP:л/4-DQPSK: 4.26 dBm (Headset ANT2)
  • EIRP:л/4-DQPSK: 7.14 dBm (Transceiver)
• c. Software Version: V1.03

WEEE This product must not be disposed of with your other household waste or treated in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product. Safety Guideline for Lithium Battery This battery must not be disposed of with your other household waste or treated in compliance with the local regulations or contact your local city office, your household waste disposal service, or the shop where you purchased the product.

“CAUTION!” Risk of explosion if the battery pack is not replaced by the same type as specified by the manufacturer. Please keep following all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
2. Please keep this battery pack away from fire and high heat sources due to explosion might happen. Do not place your battery pack close to any heater or hot location.
3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with with any sharp or keen objects either.
4. This battery pack shall not be exposed to moisture, dripping, or splashing.
5. If any electrolyte flow out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Arctis 1 Wireless User Manual

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements, the device can be used in portable exposure conditions without restriction. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Headset FCC ID: ZHK-HS00021 Transceiver FCC ID: ZHK-HS00021TXX Frequency bands and Powers (Headset and Transceiver)

• a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
• b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
  • Conducted Peak Power: л/4-DQPSK: 4.19 dBm (Headset ANT 1)
  • Conducted Peak Power: л/4-DQPSK: 3.85 dBm (Headset ANT 2)
  • Conducted Peak Power: л/4-DQPSK: 3.32 dBm (Transceiver)
• c. Software Version: V1.03

Industry Canada Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003. NMB-003 du Canada. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. learn more at steelseries.com

FAQs About SteelSeries Arctis 1 Wireless Gaming Headset for Xbox

For more manuals by SteelSeries, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/07/SteelSeries-Arctis-1-Wireless-Gaming-Headset-for-xbox-User-Manual.pdf” download=”all”]