Sony SSCSE Dolby Atmos Enabled Speakers
WARNING
This symbol on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local Civic Office, your household waste disposal service, or the shop where you purchased the product.
Precautions
On Safety
- Should any liquid or solid object fall into the system, unplug the system’s power cord and have the system checked by qualified personnel before operating it any further.
On operation
- Do not drive the speaker system with a continuous wattage exceeding the maximum input power of the system.
- If the polarity of the speaker connections is not correct, the bass tones will be weak, and the position of the various instruments obscure.
- Contact between bare speaker wires at the speaker terminals may result in a short circuit.
- Before connecting, turn off the amplifier to avoid damaging the speaker system.
- The volume level should not be turned up to the point of distortion.
On placement
- Do not install the speakers in an inclined position.
- Do not place the speakers in locations that are:
- Extremely hot or cold
- Dusty or dirty
- Very humid
- Subject to vibrations
- Subject to direct sunlight
- Near magnetic cards (credit cards, commuter passes, etc.) Magnetic cards may fail due to the magnets in the speaker units.
- Near televisions, The speakers are not magnetically shielded. Therefore, if you use the speakers near CRT-based televisions, color shading occurs on the television screen.
- Use caution when placing the speaker on specially treated (waxed, oiled, polished, etc.) surfaces, as staining or discoloration may result.
On cleaning
- Clean the speaker cabinets with a soft cloth lightly moistened with a mild detergent solution or water. Do not use any type of abrasive pad, scouring powder, or solvents such as alcohol or benzene.
If you have any questions or problems concerning your speaker system, please consult your nearest Sony dealer.
Connecting the speakers to an amplifier
Connect the speakers to the speaker output terminals of an amplifier using the speaker cords (not supplied). Make sure power to all components (including the subwoofer) is turned off before starting the hook-up. When connecting, tighten the speaker terminals by turning them in the direction of the arrows in the illustration.
Notes
- Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding plus (+) and minus (–) terminals on the amplifier.
- Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise.
- Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a short-circuit.
- For details on the speaker connection of the amplifier, refer to the operating instructions supplied with your amplifier.
Tip
Black striped wires are minus (–) in polarity and should be connected to the minus (–) speaker terminals.
Positioning the speakers
Install the speakers as shown in the illustration.
- The system can be used as either a front or a surround speaker.
Tip
Attach the foot pads (supplied) to the bottom corners of the speakers (see Fig 2), and make sure the speakers are installed completely level.
Troubleshooting
Should you encounter a problem with your speaker, check the following list and take the indicated measures. If the problem persists, consult your nearest Sony dealer.
There is no sound from the speaker
- Make sure the connections have been correctly made.
- Make sure the volume on the amplifier has been turned up properly.
- Make sure the program source selector on the amplifier is set to the proper source.
- Make sure the headphones are not connected.
There is a hum or noise in the speaker output
- Make sure the connections have been correctly made.
- Make sure none of the audio components are positioned too close to the TV set.
The sound suddenly stopped
- Make sure the connections have been correctly made. Contact between bare speaker wires at the speaker terminals may cause a short circuit.
Specifications
For more Manuals by SONY, visit MANUALSDOCK
Faqs About Sony SSCSE Dolby Atmos Enabled Speakers
What is Dolby Atmos?
Dolby Atmos is an advanced audio technology that allows sounds to be precisely placed and moved in three-dimensional space, including overhead, creating a more immersive audio experience.
What makes the Sony SSCSE speakers Dolby Atmos enabled?
The Sony SSCSE speakers are designed to deliver Dolby Atmos sound by bouncing audio off the ceiling, creating overhead sound effects without the need for in-ceiling speakers.
Do I need special equipment to use the Sony SSCSE speakers?
You’ll need a Dolby Atmos-enabled AV receiver or amplifier to fully utilize the capabilities of the Sony SSCSE speakers. These speakers are designed to work specifically with Dolby Atmos systems.
How do I set up the Sony SSCSE speakers?
The Sony SSCSE speakers can be placed on top of existing floor-standing or bookshelf speakers, or mounted directly to the wall near the ceiling, ideally above the listener’s ear level. Ensure they are angled correctly to bounce sound off the ceiling.
What kind of sound quality can I expect from the Sony SSCSE speakers?
The Sony SSCSE speakers are designed to deliver immersive and lifelike sound, especially for Dolby Atmos content. They provide clear and detailed audio with precise positioning of sound effects.
Can I use the Sony SSCSE speakers for non-Atmos content?
Yes, the Sony SSCSE speakers can be used with any audio content, but they are optimized for Dolby Atmos. They can enhance the audio experience for both movies and music, providing a more immersive soundstage.
Do the Sony SSCSE speakers come with any warranties?
Sony typically provides a limited warranty for their speakers, covering defects in materials and workmanship for a certain period. Be sure to check the warranty terms provided with your specific model.
Are the Sony SSCSE speakers wireless?
No, the Sony SSCSE speakers are not wireless. They are passive speakers that require a wired connection to an AV receiver or amplifier for power and audio signal.
Can I use the Sony SSCSE speakers with other brands of AV receivers or amplifiers?
Yes, as long as the AV receiver or amplifier supports Dolby Atmos and has the necessary speaker outputs, you can use the Sony SSCSE speakers with any compatible system.
Are the Sony SSCSE speakers suitable for large or small rooms?
The Sony SSCSE speakers can be used in a variety of room sizes, but for larger rooms, you may need additional speakers or a more powerful amplifier to achieve optimal sound quality and coverage.