Sigma 16mm Contemporary Lens Instruction Manual

Sigma 16mm Contemporary Lens

About Sigma

SIGMA is a manufacturer that creates and sells interchangeable lenses, digital cameras, and other photographic equipment. They have only made goods linked to photography and video since their founding in 1961. In other words, they are a business that exclusively concentrates on developing photography-related technologies.

the ideal equipment for unique, unforgettable moments. Products and services that are ground-breaking, never-before-seen, and of the highest caliber are accessible anywhere in the world. SIGMA pursues innovation and exploration with an unprecedented level of enthusiasm and dedication, guided by these unbounded principles as its objectives.

INSTRUCTIONS

SIGMA CORPORATION

2-4-16 Kurigi, Asao-ku, Kawasaki-shi, Kanagawa 215-8530 Japan Phone: (81)-44-989-7437 Fax: (81)-44-989-7448

http://www.sigma-photo.co.jp/support/index.htm

The CE Mark is a Directive conformity mark of the European Community

Thank you very much for purchasing a Sigma Lens. In order to get the maximum performance and enjoyment out of your Sigma lens, please read this instruction booklet thoroughly before you start to use the lens.

WARNING: SAFETY PRECAUTIONS

• Do not look directly at the sun, through the lens. Doing so can cause damage to the eye or loss of eyesight.
• Do not leave the lens in direct sunlight without the lens cap attached, whether the lens is attached to the camera or not. This will prevent the lens from concentrating the sun’s rays, which may cause a fire.
• The shape of the mount is very complex. Please be careful when handling it so as not to cause injury.

DESCRIPTION OF THE PARTS

• Filter Attachment Thread
• Mount
• Focus Ring
• Lens Hood

FOR MICRO FOUR-THIRDS MOUNT

This lens can be used with Micro Four Thirds™ System lens mount specification cameras.

• You cannot use it on Four Thirds™ System lens mount specification cameras.

FOR SONY E-MOUNT

This lens can be used with Sony O camera system E-mount (APS-C format) cameras.

• You cannot use it on Sony A-mount cameras.
• In the camera setting, select “Auto” in the distortion compensation from the lens compensation menu.
• In case the camera does not incorporate the lens compensation function, the lens cannot offer distortion compensation.

ATTACHING TO THE CAMERA BODY

When this lens is attached to the camera body it will automatically function in the same way as your normal lens. Please refer to the instruction booklet for your camera body.

• On the lens mount surface, there are many electrical contacts. Be careful not to damage them. If they are damaged, it may cause the camera to malfunction.

FOCUSING

For autofocus operation, set the camera to autofocus mode. If you wish to focus manually, set the camera to manual focus mode. You can adjust the focus by turning the focus ring.

• Please refer to the camera’s instruction manual for details on changing the camera’s focusing mode.

LENS HOOD

A bayonet-type detachable hood is provided with the lens. This lens hood helps to prevent flare and ghost images caused by bright illumination from outside the picture area. Attach the hood and turn clockwise until it stops rotation. (fig.2)

• When taking photographs using the built-in flash, it is advisable to remove the lens hood so as to avoid cutting off any of the flash output, which could cause a shadow in the picture.
• In order to place the lens and hood into the storage case, you must first remove the hood, and then replace it on the lens in the reverse position. (fig.3)

FILTER

• Only one filter should be used at the time. Two or more filters and/or special thicker filters, like a polarizing filter, may cause vignetting.

BASIC CARE AND STORAGE

• Avoid any shocks or exposure to extreme high or low temperatures or to humidity.
• For extended storage, choose a cool and dry place, preferably with good ventilation. To avoid damage to the lens coating, keep away from mothballs or naphthalene gas.
• Do not use thinner, benzine, or other organic cleaning agents to remove dirt or fingerprints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue.
• This lens is not waterproof. When you use the lens in the rain or near water, keep it from getting wet. It is often impractical to repair the internal mechanism, lens elements, and electric components damaged by water.
• Sudden temperature changes may cause condensation or fog to appear on the surface of the lens. When entering a warm room from the cold outdoors, it is advisable to keep the lens in the case until the temperature of the lens approaches room temperature.

TECHNICAL SPECIFICATIONS

• This lens is not incorporated with the OS (Optical Stabilizer) function.
• The glass materials used in the lens do not contain environmentally hazardous lead and arsenic.

FAQS About Sigma 16mm Contemporary Lens

For more manuals by Sigma, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/09/Sigma-16mm-Contemporary-Lens-Instruction-Manual.pdf” download=”all”]