Sceptre ‎E248W 24-inch Professional Thin 1080p LED Monitor User Manual

Sceptre ‎E248W 24-inch Professional Thin 1080p LED Monitor

SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. To prevent potential danger, please observe the following instructions when installing, operating, and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Display, please read the following precautions carefully before using the product.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for prolonged periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

SAFETY INSTRUCTIONS

Never place a display set in an unstable location. A display set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

1. Use only cabinets or stands recommended by the manufacturer of the display set.
2. Use only furniture that can safely support the display set.
3. Make sure the display set is not overhanging the edge of the supporting furniture.
4. Do not place the display set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display set to a suitable support.
5. Do not place the display set on cloth or other materials that may be located between the display set and supporting furniture.
6. Make sure to warn and educate children about the dangers of climbing on furniture to reach the display set or its controls.
7. Keep a minimum distance of 5 cm around all display edges for sufficient ventilation.
8. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. Install by the manufacturer’s instructions.
9. No naked flame sources, such as lighted candles, should be placed on the apparatus.
10. Operating environment: Temperature: 5°C~35°C, Humidity: 10% to 90% noncondensing, Altitude: 0~2,000 m.

IMPORTANT INFORMATION

Dispose of unwanted electronics and batteries through an approved recycler. For displays, please visit the web at https://www.earth911.com/recyclingguide/how-to-recycle-large-electronics/For batteries, please visit the web at https://www.call2recycle.org/ For more information, visit: https://www.sceptre.com/recycling.html or call +1 (888) 580-5588. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. Please refer to the last page for further references. The house icon identifies that this product is for indoor use.

WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to https://www.P65Warnings.ca.gov.

IMPORTANT INFORMATION

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use, and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the display.
• Unplug the power cord before cleaning the display. Please use a microfiber cleaning cloth for cleaning the bezel of the display only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to ensure compatibility.
• When moving the display from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the display immediately after this to avoid causing fire, electric shock, or component damage.
• Do not place the display on an unstable cart, stand, or table. If the display falls, it can injure a person and cause severe damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the display.
• Only use furniture that can safely support the display.
• Make sure the display is not overhanging the edge of the support furniture.
• Do not place the display onto tall furniture (such as cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.
• Do not place the display on cloth or other materials that may be located between the display and supporting furniture.
• Be sure to educate your children regarding the dangers of climbing on furniture to reach the display or its controls.
• Any heat source should maintain a distance of at least 5 feet away from the display, i.e., radiator, heater, oven, amplifier, etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure the reliable operation of the display and to prevent, be sure these openings are not blocked or covered.  Do not place the display in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the ventilation slots of the display. Do not place any objects on the top of the product. the product short-circuits parts causing a fire or electric shock. Never spill liquids on the display.
• Do not use the display in a portrait format (by rotating 90 degrees) under a high-temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the display.
• The display should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company
• The power cable must be replaced when using a different voltage from that specified in the User Manual. For more information, contact your dealer.
• The display is equipped with a two-pronged plug.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be installed near the equipment and should be easily accessible.
• Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.
• Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug the unit during a lightning storm or when it will not be used for a prolonged period. This will protect the display from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer, and refer all servicing to qualified service personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates the product, unplug the power cord, and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord, and contact your dealer immediately. Do not try to repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
• Do not install the product in an area with heavy dust or high humidity.  Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period, unplug the power connector.
• To avoid the risk of electric shock, do not touch the connector with wet hands.
• Insert batteries by instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury, and contamination of the remote control.
• If any of the following occurs, please contact the dealer:
• The power connector fails or frays.
• Liquid sprays or any object drops into the display.
• The display is exposed to rain or other moisture.
• The display is dropped or damaged in any way.
• The performance of the display changes.
• Operating environment: Temperature: 5°C ~ 35°C, Humidity: 10% to 90% non-condensing, Altitude: 0~2,000 m.

Dear Sceptre Customer.

Congratulations on your new SCEPTRE E24 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble-free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.

• For technical assistance, please call 1(800) 788-2878 or email our tech support group at SceptreTS@SCEPTRE.com.
• For all other inquiries, please call 1(800) 788-2878 or email our customer service group at  SceptreTS@SCEPTRE.com.
• Technical Support, Customer Service, and Online Chat are available during business hours Monday to Friday 8:30 AM – 5:30 PM (Pacific Standard Time). We recommend you register your SCEPTRE monitor by going to our website https://www.sceptre.com/registration.html.

Opening the Package

The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening, it is recommended that the display package must be handled by a minimum of 2 or more persons.

Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, check that the product is in good condition and that all standard accessories and items are included. Save the original box and all packing materials for future shipping needs.

Package Contents

• SCEPTRE Display x 1
• Display Base x1
• Display Neck x 1
• HDMI Cable x 1
• Power Adapter x 1
• User Manual x 1

Installation
Please read the user manual carefully before performing the installation. When an extension cord is required, use one with the correct power rating. Use only the Sceptreprovided power cable or AC adapter approved for use with this device.

The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. Avoid installing the product in the kitchen, bathroom, or other places with high humidity, dust, or smoke, so as not to shorten the service life of the electronic components.

Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation may induce poor ventilation and subsequent component damage.

Installing the Monitor Stand Assembly

Insert the neck into the base with the front of the neck facing the left at a 45-degree angle and twice the neck clockwise until you hear a click sound and the neck is facing forward aligned with the base.

Take out the monitor and neck from the carton box and insert the neck into the bottom position of the monitor.

Wall Mounting

1. Lay the monitor down on a flat surface with the screen facing downwards. Remove the stand assembly by unlocking the locking clip.

1. With the circular indentation now open to you, you will see 4 screws installed on the back of the monitor. Please unscrew them.
2. Install the wall mount plate to the back of the monitor using the provided Wall Mount Plate Screws (M4 x 10mm).
3. Once the wall-mount spacer screws are installed, the monitor is ready to be wall mounted. The mounting pattern is 75mm x 75mm.

Identifying Front and Rear Panel

Front View

Indicator Light –
The light is blue when the monitor is turned on. The light is red when the monitor is turned off but plugged into power. The light is flashing blue when there is no signal given to the monitor.

Rear View with Buttons

Buttons from left to right

1. This button activates the On-Screen Display (OSD). While the OSD is active, this button will act as the select button to open up an option for adjustment.
2. When the OSD This option adjusts the loudness of the monitor speakers.
3. When the OSD Selects which input device is to be displayed on the monitor.
4. When the OSD Preset values adjust color accordingly to your purpose of use.
5. When the OSD turns the display off.

Panel Tilt Adjustment

The screen can be adjusted by inclining forward and backward; however, the specific adjustment depends on the particular model of the device. Generally, it may be inclined 5°±1°forward and 15°±2° backward.

Please Note:
When adjusting the angle of the monitor, be sure not to touch or press the LCD screen.

Rear View with Connections

1. DISPLAYPORT1-2 – DisplayPort is a digital video connection for connection to computers with display port video and audio output.DisplayPort is DP v1.2.
2. HDMI 1 – HDMI stands for High-Definition Multimedia Interface. This connection is for computers with HDMI video and audio output. HDMI 1 and 2 are both HDMI v2.0.
3. HDMI 2 – HDMI stands for High-Definition Multimedia Interface. This connection is for computers with HDMI video and audio output. HDMI 1 and 2 are both HDMI v2.0.
4. AUDIO OUT (3.5mm Mini-jack) – This connection is for audio from the monitor to multimedia speakers or headphones.
5. POWER – This plug is responsible for providing power to the monitor. Use it with the included AC adapter.

Connections

If You Have HDMI Connection on Your Video Card…

1. Make sure the power of the E24 LED MONITOR is turned off.
2. Obtain an HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer.
3. You can plug a set of headphones or speakers into the headphone jack for audio.
4. Turn on the power of both the E24 LED MONITOR and the computer.

Please Note:

• HDMI ports support AMD FreeSync™ only.
• HDMI 1-2 supports up to 100Hz refresh rate.
• At the optimal resolution of 1920 x 1080, the supported maximum refresh rate is 100Hz for HDMI.

If You Have DisplayPort Connection on Your Video Card…

1. Make sure the power of the E24 LED MONITOR is turned off.
2. Obtain a DisplayPort cable and connect one end to the back of the monitor and the other end to the back of the computer.
3. For audio, you can plug in a set of headphones or speakers into the headphone jack.
4. Turn on the power of both the E24 LED MONITOR and the computer.

Please Note:

• DisplayPort supports AMD FreeSync™ only.
• DisplayPort supports up to 100Hz refresh rate.
• At the optimal resolution of 1920 x 1080, the maximum support refresh rate is 100Hz for DP.

On Screen Display (OSD) Menu

The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, contrast …. etc.

When you press the button on the monitor, the OSD screen will appear. Select each of the functions with the or buttons. Use the button again to enter each of the functions, or when you are in the function already, use the button to select the option you want to adjust. Use the or buttons to adjust each option’s values. When you want to exit, press the button.

QUICK START
Quick Start offers users a variety of often-adjusted options for users.

1. BACKLIGHT – This option adjusts the luminosity of the display.
2. BRIGHTNESS – This option adjusts and controls the detail in bright colors.
3. CONTRAST – This option adjusts and controls the detail in dark colors.
4. PRESET – Preset values that adjust color according to your purpose of use.
5. VOLUME – This option adjusts the loudness of the monitor speakers.
6. ASPECT RATIO – This option adjusts the display’s ratio of width and height
7. SOURCE – Selects which input device is to be displayed on the monitor.
8. BLUE LIGHT SHIFT – Adjusts the blue light value to reduce strain on the eyes.
9. FREESYNC™ – This option turns on or off the FreeSync™ function, which reduces screen tearing with compatible graphics cards.

Supported DisplayPort

• Specifications are subject to change without notice.
• DP:1920 x 1080 @ 100Hz.

Supported HDMI Resolution

• Specifications are subject to change without notice.
• HDMI: 1920 x 1080 @ 100Hz.

Troubleshooting

To detach the DP cable from the monitor, press down on the cable’s unlocking button while pulling the cable out.

How do I clean the monitor?

IMPORTANT

1. The power cable has to be removed from the socket before cleaning the display.
2. Do not use a volatile solvent (alcohol, rosin, and toluene) to clean the display. These types of chemicals might damage the housing and the LCD glass.

Cleaning the bezel

1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry microfiber cloth or 100% cotton cloth afterward.

Please Note:

• Make sure you wring the water out of the cloth before cleaning the bezel to prevent water from penetrating the electronics.

Cleaning the Screen

1. Use a 100% cotton cloth or microfiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any material. Do not press or tap the screen to avoid cracking. When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry microfiber cloth or 100% cotton cloth afterward.

Specification

• Specifications are subject to change without notice.

LIMITED PRODUCT WARRANTY

Please read this warranty card carefully. It is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on the new and non-refurbished product, and available to customers in the  Continental US, Alaska, Hawaii, and Puerto Rico. See below for the SCEPTRE ExtendedService warranty.

SCEPTRE’s Responsibility
SCEPTRE units purchased from an authorized SCEPTRE US Reseller in the United States and that are used in the fifty (50) United States or Puerto Rico and Canada are warranted to be free from manufacturing defects in materials and workmanship for one (1) year from the date of their original retail purchase (or a period of ninety (90) days for commercial use).

If the unit fails to conform to this warranty, we will service the units using new or refurbished parts. If the part required for replacement is no longer in production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner for any upgraded parts substituted.

Service Labor
During one (1) year from the effective warranty date (or a period of ninety (90)days for commercial use), SCEPTRE will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must first call our Customer Support at (800) 788-2878. The determination of service will be made by SCEPTRE Customer Support. PLEASE DO NOT RETURN YOUR    UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.

Parts
New or remanufactured parts will be used for repairs by SCEPTRE at its designated Service Center for one (1) year (or ninety (90) days for commercial use) from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.

Dead Pixel Policy
SCEPTRE sets the limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within the normal performance specification of the LCD and is not considered defective.

Owner’s Responsibility
Effective Warranty Date Warranty begins on the date of sale to the end-user. To ensure warranty service, keep the dated bill of sale receipt as evidence of the purchase date. If you can no longer obtain your receipt, the warranty will revert to the unit’s manufacture date according to the serial number of the unit. This limited warranty applies only to the original purchaser and is non-transferable.

Warranty Service
For warranty service information, contact SCEPTRE Technical Support at the email address SceptreTS@SCEPTRE.com, via phone at (800) 788-2878, or World Wide Web chatting service at https://www.Sceptre.com. SCEPTRE Technical Support is available Monday to Friday 8:30 AM to 5:30 PM Pacific Standard Time. Parts and service labor that are SCEPTRE’s responsibility (see above) will be provided without charge.

Other services or services not covered by the warranty are at the owner’s expense. You must provide the model, serial number, and date of purchase. Before you ask for warranty service, read your  User Manual. You might avoid a service call. Warranty conditions are subject to change. For the latest Warranty Terms and Conditions and additional information regarding your warranty, please see complete details online at  https://www.SCEPTRE.com.

Disclaimer, Trademarks, Icons & Copyright Information

• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
• SCEPTRE is a trademark or registered trademark of Sceptre Group.
• Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material or the performance or use of this product.
• Sceptre, Inc. reserves the right to change product specifications without notice in the interest of continuing product improvement. Information in this document may change without notice.
• No part of this document may be copied, reproduced, or transmitted by any means for any purpose without prior written permission from Sceptre, Inc.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please Note: This equipment has been assessed and found to comply with the limits for a Class B  digital device, under part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Caution:
To comply with the limits for an FCC Class B computing device, always use the signal cord and power cord supplied with this unit.

The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC), and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.

FOR MORE MANUALS BY SCEPTRE, VISIT MANUALSDOCK

FAQS About Sceptre ‎E248W 24-inch Professional Thin 1080p LED Monitor