Pyle PBMSPG1BK Wireless Portable Boombox Speaker User Manual

Pyle PBMSPG1BK Wireless Portable Boombox Speaker

About Pyle

Pyle is a well-known consumer electronics company that specializes in manufacturing a wide range of audio equipment and accessories. The company was founded in 1960 and is based in Brooklyn, New York. Pyle Audio has built a reputation for producing affordable and quality audio products, catering to various consumer needs.

Please take the time to read this manual carefully before you begin using your new device. Any content revision of the manual won’t declare again, and we are not responsible for consequences caused by fault or oversight of this manual.

FEATURES:

• Compact Boom Box Stereo Style
• Portable Travel-Friendly Speaker Design
• Digital Streaming FM Radio
• Built-in Rechargeable Battery
• MP3 Digital Audio File Playback
• Ported Enclosure for Extended Bass
• Full Range Stereo Sound Reproduction
• Rugged & Durable ‘Super Tube’ Speaker Housing

INSTRUCTION:

 

1. Power ON/OFF
2. Play/Pause
3. MODE (Wireless BT Switch, USB disk, FM, and AUX-IN state)
4. Backward/Volume down
5. Forward/Volume Up
6. USB port
7. Micro SD slot
8. Charging Jack
9. AUX IN

Wireless BT Streaming:

1. Turn the power button to “ON”, then you will hear a “Bluetooth Device Ready To Pair” tone. The LED light blinks quickly. The speaker is now in pairing mode.
2. Activate the Wireless BT of your mobile phone and search for the device name “PyleUSA” then connect it. Once paired successfully, the Blue LED will blink slowly, and you will hear the tone “Bluetooth Device Connected Successfully” once connected.
3. Play the music from your mobile phone and enjoy.
4. Press the Forward or Backward button on the device or on Mobile phones to select songs you like.
5. Press the Play/Pause button on the device or on Mobile phones to play/pause the music.
6. Press and hold the Forward or Backward button to adjust the volume up and down or adjust the mobile phone’s volume.

Playing music from a USB disk & Micro SD card:

1. Turn the Power button to “ON”.
2. Insert a Micro SD card or USB flash disk into the slot, the speaker will make a tone “Music Play Mode”, and play the stored music automatically.
3. Under playing mode, short press the Forward or Backward button to select songs you like, and press and hold to adjust the volume up and down.
4. Press Play/Pause to play or pause.

Remark: Under Wireless BT playing mode, insert Micro SD or USB will disconnect the Bluetooth and switch to play the USB or Micro SD card. You can press the MODE button to switch to Wireless BT mode again.

FM Radio:

1. Under the FM radio state, the audio cable provided is the antenna. Please insert the audio cable to get the best FM signal before using it.
2. Turn the power button to “ON”, and press the “MODE” button, the speaker will prompt “The Radio Mode” when entering the FM state.
3. Under playing mode, short press the “Play/Pause” button to auto-search the FM Channel and store it automatically.
4. Press the Forward or Backward button to change the stored FM channel.

TWS Function:

1. Turn ON two identical speakers you want to pair, please be noted that they must have the same BT paring name, both under BT mode. You only need to set up one of the two units;
2. Press and hold the “PLAY/PAUSE” button for around 4 seconds, the speaker will make a tone “di” to start pairing, and will make a “di” voice 3 times once successfully paired;
3. Connect Wireless BT with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effects.
4. If you want to exit the TWS mode, press and hold the “TWS” button (of the unit that you set at the beginning) again to exit the TWS function.

Remark: You can connect the TWS function through either Wireless BT or AUX, but if you connect your mobile phone via the provided audio cable, you can not switch to Wireless BT mode by pressing the Mode button.

AUX-IN:

For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device. You would hear the” Aux input mode” tone once the cord is inserted. When using an external device, all functions can be controlled by the external device except pause.

Remarks:

1. To turn the unit ON, press and hold the Power button for 3 seconds;
2. Press the MODE button to switch for different modes, the order is Wireless BT, USB disk, Micro SD, FM radio, and AUX-IN.
3. The default volume is at 50% status of max volume;
4. Turn the power button to “off” if not in use.

How to charge:

1. The charger is not included in the accessories. Please use the Universal 5V/1A charger to charge this device, and we are not responsible for any damage caused by using another charger.
2. Power off the unit put the provided charge cable into the charging slot of the unit, and connect the other end to your PC or another charger with 5V output.
3. Charging time should be 3-5 hours. The light is red while charging, and the indicator light will switch off when fully charged. (When playing music during charging, please put the volume to the middle, because for some music with heavy
4. bass, the charger may not be able to afford the high current temporarily under the maximum volume.)
5. In order to prolong the life of a battery, please do not charge more than 8 hours.

Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com

Warning

This product can expose you to a chemical or group of chemicals, which may include ”Cadmium (Cd)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

FAQs About Pyle PBMSPG1BK Wireless Portable Boombox Speaker

For more manuals by PYLE, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Pyle-PBMSPG1BK-Wireless-Portable-Boombox-Speaker-User-Manual.pdf” download=”all”]