Polaroid PBT530 Wireless Portable Speaker
In the Box
- Wireless Portable Speaker
- Micro-USB Charging Cable
Location of Controls
- [POWER] Knob
- Bluetooth LED Indicator
- Micro-USB Charging Port
- Charging LED Indicator
Pairing the Speaker
- Turn the speaker ON by turning the [POWER] knob to the ON position. A tone will be heard indicating the speaker has power and the Bluetooth LED indicator will quickly flash BLUE.
- Set your mobile device to search * 7 41 150 for Bluetooth devices. When your Bluetooth mobile device finds the speaker, select PBT530 from the list of PETS30 found devices.
- Once successfully paired, a tone will be heard and the LED indicator will slowly flash OTHER DEVICES BLUE.
For iOS or Android
- Go to SETTINGS > BLUETOOTH (Make sure Bluetooth is turned ON)
Using the Speaker
Playing Music
To enjoy music wirelessly on your speaker, make sure you are paired to a Bluetooth-enabled device. Once paired, you can control the media playback and volume adjustment with the controls on your paired device. Please consult the Pairing the Speaker section of this user guide for more information.
Charging the Speaker
To charge the speaker, attach the small end of the supplied micro-USB charging cable to the micro-USB charging port on the side of the speaker. Plug the other end into the USB port on a computer, USB charging device, or 5V USB adapter and plug into a wall outlet. The charging LED indicator will turn RED while charging and turn off when charged.
Legal Information
READ THIS CAREFULLY AND SAVE FOR FUTURE REFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery, and do not use it in damp and/or corrosive conditions. Use only compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).
Rain/Moisture Warning
- Do not expose the unit to extreme temperatures (heat or cold), open flames, humid conditions, or wet conditions.
- Do not submerge in water.
- Do not open this product or attempt to repair the unit yourself should it not be working.
Warranty Information
This product as supplied and distributed new by AIT, Inc. (“AIT”) to the original consumer purchaser is warranted by AIT against defects in material and workmanship for one year from your date of purchase (“Warranty”). In the unlikely event that this product is defective, or does not perform properly, you may within one year from your original date of purchase return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE
- Go to our website portal to receive an SRO number.
- Provide proof of the date of purchase within the package (dated bill of sale).
- Prepay all shipping costs to the authorized service center, and remember to insure your return.
- Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
- Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping, will require you to file a claim with the carrier.
IN NO EVENT WILL AIT, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
For more Manuals by POLAROID, visit MANUALSDOCK