OSD Audio Patio Speaker
About OSD Audio
OSD Audio focuses on providing high-quality audio solutions for both residential and commercial applications. Their products are designed to deliver exceptional sound performance and are often used in home theater systems, multi-room audio setups, outdoor entertainment areas, and professional audio installations.
In addition to their audio products, OSD Audio also offers a variety of home theater accessories such as speaker mounts, brackets, and stands to help customers optimize their audio setup and improve the overall listening experience.
Installing Speakers
These weather-resistant patio speakers are manufactured to resist a variety of weather conditions. The most ideal place to install these speakers is the undersides of most eaves and overhangs as they provide the best protection.
Like all speakers, they sound the best when placed no more than seven feet apart from each other, and slightly higher than ear level. If the speakers are more than seven feet apart, toe them in toward the center of the listening area.
These speakers are not waterproof and cannot be submerged underwater.
Placing Speakers
If your application requires the speaker to be mounted, please follow these directions. Mount the plastic knobs supplied. Never mount a speaker on a wall made of unreinforced drywall or plasterboard. If you are unsure, consult a professional contractor. (See Diagram 1)
Painting the grilles
The metal grilles may also be painted. Use very thin paint (5:1). It will plug up the holes with excess paint. First, remove the grille from the speaker then using spray paint lightly go over the front of the grille and then go over the back of the grille. Two coats may be necessary for the desired look.
Mounting
Install the bracket on the speaker. Screw the bracket knobs into the cabinet. Point the speaker toward the listening area. Once the direction of the speaker has been determined tighten the bracket knobs securely. (See Diagram 2)
WIRING
Connect the speaker cable to the speaker cable terminals, matching the proper polarity with your amplifier, + to + (red) and – to (black). Make sure to connect the right channel to the right speaker and the left channel to the left speaker. Either channel may be attached to either terminal set, however, be sure that polarity (+ and -) is correct on each channel, or the performance of the speaker will be seriously affected as one channel will cancel out the other.
NOTE: To avoid damage please select correct input 8 Ohm, 70 volt or 100v, prior to connecting Para evitar daños, seleccione la entrada correcta 8 Ohm, 70 voltios o 100v, antes de conectar Um Schäden zu vermeiden, wählen Sie bitte vor dem Anschließen den richtigen Eingang 8 Ohm, 70 Volt oder 100 Volt
70/100 Volts Considerations (Only for Speakers with 70/100V Option)
The 70/100V transformer offers you the ability to daisy chain multiple speakers in parallel. In doing so, you would simply connect 1 pair of outputs to each speaker and daisy chain to subsequential speaker/s. If you don’t intend to daisy chain the speakers, set the default setting to 8 ohms. (See Diagram 3 – Example of Settings)
Warranty & Repair
All OSD AUDIO speaker products have (1) year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period OSD AUDIO will replace any defective part and correct any defect in workmanship without charge for either parts or labor are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD AUDIO. The unit must be returned to OSD AUDIO at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damage resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by OSD Audio
OSD AUDIO sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD AUDIO product purchased from an unauthorized dealer or another source, including retailers, mail-over dealers, and online sellers will not be honored or serviced under the existing OSD AUDIO warranty policy. Any sale of a product by an unauthorized source or another manner not authorized by OSD AUDIO shall void the warranty on the applicable product.
Damage to or destruction of components due to the application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@audiogeargroup .com for a Returned Merchandise Authorization (RMA) number# and then the unit must be shipped to OSD AUDIO at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.
OSD Audio | Brea, CA | osdaudio.com
FAQS About OSD Audio Patio Speaker
Where can I find OSD audio?
A group of audiophiles with a Southern California base who realised that high-quality audio gear didn’t always have to be expensive created OSD Audio in 2003.
For outside speakers, how much power am I going to need?
In locations smaller than 300 square feet, a pair of 60-watt patio speakers will provide excellent coverage. 80 to 100 watt speakers should be used for spaces up to 300 to 500 square feet, while 150 to 175 watt speakers should be used for spaces up to 600 to 800 square feet.
Do outdoor speakers require an electrical outlet?
The majority of outdoor speakers are passive devices, which means they will require power because they lack built-in amplification.
How can I keep my outside speakers secure?
During cold weather, a professional approach is to cover the speakers with plastic bags or containers. This offers at least some protection from precipitation, sleet, snow, and extreme humidity, while the change in temperature may still cause problems.
Which height works best for outdoor speakers?
10 to 8 feet
Is OSD Audio a reliable company?
The OSD Audio AP650 speakers offer the best value of any outdoor pair we’ve discovered. Their clarity surpasses that of any model we’ve heard for less than $200 a pair. Additionally, they provide a rich, powerful sound that is easily able to fill an outdoor area up to 1,500 square feet.
What does OSD audio’s full name mean?
High-end home and business audio products are designed, engineered, and distributed by Optimal Speaker Design. From straightforward in-ceiling speakers to sophisticated whole-house audio systems, we offer a variety of items with exquisite aesthetics and top-notch audio quality.
What does OSD in audio mean?
Best Speaker Design
How long can speaker wire be used outdoors?
For lengths up to 36 feet with 6-ohm speakers, 16AWG wire is advised, and for runs up to 150 feet with 10 or 12AWG wire. It is advised to use 16 AWG wire for runs up to 48 feet and 10 or 12 AWG wire for routes up to 200 feet when using 8-ohm speakers.
The speaker power range is what.
The measured or hypothesised maximum amount of electric power that a speaker can handle before burning out is known as the speaker power handling standard (also known as wattage rating). The specification is supplied in watts and can be calculated as a root mean square (rms), peak, or continuous value.