OSD Audio Black Series BK-R103 10-inches 3-Way In-Ceiling Speaker
About OSD Audio
OSD Audio focuses on providing high-quality audio solutions for both residential and commercial applications. Their products are designed to deliver exceptional sound performance and are often used in home theater systems, multi-room audio setups, outdoor entertainment areas, and professional audio installations.
In addition to their audio products, OSD Audio also offers a variety of home theater accessories such as speaker mounts, brackets, and stands to help customers optimize their audio setup and improve the overall listening experience.
Preparation
Tools For Installation
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
Speaker Wire Guide
- 18AWG minimum – for distances up to …………………. 10 ft
- 16AWG – from …………………………………..…… 10 to 50 ft
- 14AWG – from ……………………………………… 50 to 100 ft
Considerations
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 – 10 feet apart.
- (For Ceiling LCR models only) Place speakers with the 15°angled woofer pointed toward the main listening area.
- If you intend to paint the grilles, do so before installation.
Placement
There are many options for proper speaker placement depending upon speaker type and application. It’s important to carefully plan the placement of your speakers, as installation requires that you cut a hole in your wall or ceiling.
(See Diagram 1.) Typical speaker placement for a 5.1 and 7.1 speaker systems.
Installation:
Cut Out
NOTE: This is the most important part of the entire installation. If you are not certain whether any obstructions exist behind the desired mounting area, you should start by cutting a small hole in the center of your penciled mounting hole with a drywall saw.
Trace along the included template. Cut along the traced line using a drywall saw or rotary drill. Use a piece of sandpaper to sand down the cutout edge for a smoother contour. (See Diagram 2.)
Mounting
Tighten the mounting brackets by simply turning the screws on the front of the speaker baffle slowly clockwise. The quick-turn mounting system and frame will “sandwich” or clamp around the dry wall to hold the speaker securely in place once fully tightened to the locked position.
Connection
When connecting any speakers to the amplifier or receiver, always make sure the power is off. Locate the connection terminals on the back of your receiver or amplifier. Always make sure to connect audio out from the back of your receiver or amplifier to the speakers.
NOTE: Not all Amplifier/Receivers can safely play more than one pair of speakers at once. Please refer to your owner’s manual for impedance and wattage compatibility.
Adjustment
On select models ( *Performance, Reference ) of OSD Black Series, a front-mounted 3 position ±3dB treble contour switch can be used to tailor high frequencies according to speaker placement or the listener’s preference. (See Diagram 5.)
Excludes Shallow Mount Series
Pivoting Tweeter
Your Black series speaker comes from the factory with the tweeter centered in the neutral position. This will provide the smoothest response. However, select models come with a pivoting tweeter so you can focus the sound directly toward the listening area if needed. In order to do this, carefully press the edge of the tweeter baffle in the direction you wish to focus the sound. (See Diagram 6.)
CAUTION: When adjusting the pivoting tweeter be sure not to touch the dome as you may cause damage to the speaker.
SPECIFICATIONS
WARRANTY
All Optimal Speaker Design speaker products have Limited Lifetime Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Optimal Speaker Design will replace any defective part and correct any defect in workmanship without charge for either parts or labor Optimal Speaker Design may replace returned speakers with a product of equal value and performance. In such cases, some modification to the mounting may be necessary and are not Optimal Speaker Designs’ responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by Optimal Speaker Design. The unit must be returned to Optimal Speaker Design at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damage resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by Optimal Speaker Design sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service.
Any Optimal Speaker Design product purchased from an unauthorized dealer or another source, including retailers, mail-over dealers, and online sellers will not be honored or serviced under the existing Optimal Speaker Design warranty policy. Any sale of a product by an unauthorized source or another manner not authorized by Optimal Speaker Design shall void the warranty on the applicable product.
Damage to or destruction of components due to the application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number#, and then the unit must be shipped to Optimal Speaker Design at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) of Any products that have been altered or modified • Any product whose identifying number of decal, serial #, etc. has been altered, defaced or removed Normal wear and maintenance.
FAQS About OSD Audio Black Series BK-R103 10-inches 3-Way In-Ceiling Speaker
Q: What is the OSD Audio Black Series BK-R103 10-inch 3-Way In-Ceiling Speaker?
A: The OSD Audio Black Series BK-R103 is a 10-inch 3-way in-ceiling speaker designed for high-quality audio performance in a variety of environments. It is part of the OSD Audio Black Series, known for its premium sound quality and sleek design.
Q: Can the OSD Audio Black Series BK-R103 be used in a home theater setup?
A: Yes, absolutely! The OSD Audio Black Series BK-R103 is a versatile speaker that can be used in various audio setups, including home theaters. Thanks to its 3-way design and high power handling, it can deliver excellent audio performance, whether you use it as a single speaker or as part of a larger home theater system.
Q: Is the OSD Audio Black Series BK-R103 suitable for outdoor use?
A: The OSD Audio Black Series BK-R103 is primarily designed for in-ceiling installation, which means it is not explicitly built for outdoor use. However, if you have a covered patio or a similar protected outdoor area, you might be able to use them in those environments. Just be sure to provide adequate protection from direct exposure to the elements, as they are not fully weatherproof.
Q: How do I install the OSD Audio Black Series BK-R103 in-ceiling speaker?
A: Installing the OSD Audio Black Series BK-R103 in-ceiling speaker requires cutting a hole in the ceiling where you want to place the speaker. Once the hole is prepared, you can then mount the speaker into the ceiling and connect the speaker wires. It’s crucial to follow the manufacturer’s instructions and safety guidelines during installation. If you’re not familiar with this type of installation, it’s recommended to seek the help of a professional installer.
Q: Can the OSD Audio Black Series BK-R103 be painted to match my ceiling?
A: Yes, the OSD Audio Black Series BK-R103 comes with paintable grilles, allowing you to paint them to match your ceiling or blend in with your room’s decor seamlessly. This feature gives you the flexibility to customize the appearance of the speakers and make them less conspicuous if desired.
Q: Where can I purchase the OSD Audio Black Series BK-R103 in-ceiling speaker?
A: You can purchase the OSD Audio Black Series BK-R103 from various audio equipment retailers, both online and in brick-and-mortar stores. Be sure to check the availability and pricing from reputable sellers or the official OSD Audio website to ensure you’re getting an authentic product with warranty support.
Q: Is the OSD Audio Black Series BK-R103 sold individually or as a pair?
A: The OSD Audio Black Series BK-R103 may be sold individually or as a pair, depending on the retailer or the package you choose. Before making a purchase, it’s essential to check the product listing to confirm whether you’re buying a single unit or a pair of speakers.
For more manuals for OSD Audio, Visit Manualsdock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/07/OSD-Audio-Black-Series-BK-R103-10-inches-3-Way-In-Ceiling-Speaker-User-Guide.pdf” download=”all”]