Nespresso Vertuo Plus quick start Manual

Nespresso Vertuo Plus

SAFETY PRECAUTIONS

CAUTION
when you see this sign, please refer to the safety precautions to avoid possible harm and damage.

INFORMATION
when you see this sign, please take note of the advice for the correct and safe usage of your appliance.

WARNING
The Safety precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on.

• The appliance is intended to prepare beverages according to these instructions.
• Please do not use the appliance for anything other than its intended use.
• This appliance has been designed for indoor and non-extreme temperature conditions only.
• Protect the appliance from direct sunlight effect, prolonged water splash, and humidity.
• This is a household appliance only. It is not intended to be used in: staff kitchen areas in
  shops, offices, and other working environments; farm houses; by clients in hotels, motels, and other residential type environments; bed and breakfast type environments.
• This appliance may be used by children of at least 8 years of age, as long as they are supervised have been given instructions about using the appliance safely, and are fully aware of the dangers involved.
• Cleaning and user maintenance shall not be carried out by children unless they are older than 8 years of age and they are supervised by an adult.
• Keep the appliance and its cord out of reach of children under 8 years of age.
• This appliance may be used by persons with reduced physical, sensory, or mental capabilities, or whose experience or knowledge is not sufficient provided they are supervised or have received instruction to use the appliance safely and understand the dangers.
• Children shall not use the device as a toy.
• The manufacturer accepts no responsibility and the guarantee will not apply for any commercial use, inappropriate handling or use of the appliance, any damage resulting from use for other purposes, faulty operation, non-professional repair, or failure to comply with the instructions.

OVERVIEW

PACKAGING CONTENT

SPECIFICATIONS

• Depending on model

MACHINE HANDLING

WATER TANK

1. The water tank arm can be rotated and positioned at the back, to the left, or the right-hand side of the machine
2. Remove the water tank by tilting it slightly backward, then gently pulling it up. Put the water tank in position by placing it vertically onto its arm, until there is a ‘click’ sound.

CAPSULE CONTAINER

1. Remove the water tank, then remove the capsule container by sliding it sideways.
2. Place the capsule container in the back of the machine by sliding it sideways into position. It is held in place by a magnet. Place the water tank back.

CUP SUPPORT

1. The cup support has 4 positions and can be temporarily removed to accommodate various cup sizes.
2. To place the cup support, slide the cup support straight into the holes and gently push down until the hooks are well in place. To remove it, gently lift it straight up and then pull the cup support out.

POWER CABLE

1. The power cable can be adjusted under the machine. Insert the remaining cable in the guide on the left or the right side socket, depending on the position chosen for the water tank. Ensure the machine is in an upright position.

FIRST USE OR AFTER A LONG PERIOD OF NON-USE

CAUTION
First, read the Safety Precautions to avoid risks of fatal electrical shock and fire.

1. Rinse and clean the water tank and lid before filling it with only fresh drinking water. Place the water tank in place.
2. Ensure the capsule container and the cup support are in place. For your safety, operate the machine only with cup support and capsule container in position.
3. Plug the machine into the outlet.
4. Turn the machine “ON” by pushing the button. GREEN light will blink while the machine is heating up.
5. Steady green lights will indicate the machine is ready.
6. Place a cup of at least 0.5 l under the coffee outlet.
7. Open the machine head by pressing the lever up to eject the capsule and then push the lever down to close it
8. Push the buŽon 3 times in 2 seconds to start cleaning and let the cleaning procedure complete automatically. ORANGE lights will blink during the operation. It will take less than 2 minutes before a flow comes out. The procedure consists of 3 cycles of pumping water in, internal cleaning, and water flowing from the outlet to complete.
9. This procedure may take up to 5 minutes. The procedure can be stopped at any time by pushing the button. The button will go to steady GREEN. To restart the cleaning process, follow the instructions starting at point 8. To brew a coffee, insert a capsule, push the lever down to close the machine, and push the button.

COFFEE PREPARATION

CAUTION
Be careful not to injure yourself on sharp points or trap your fingers when reaching inside the machine.

1. Fill the water tank with fresh drinking water.
2. Turn the machine “ON” by pushing the button.
3. GREEN lights will blink while the machine is heating up.
4. A steady GREEN light indicates the machine is ready.
5. Place a cup of sufficient capacity under the coffee outlet. The risk of scalding may occur due to overflowing.
6. Open the machine head by pushing the lever upwards. The machine head will open automatically, with an electrical mechanism.
7. Insert a capsule with the dome shape facing downward.
8. Push the lever down to close the machine head.
9. Push the button to start the brewing The green light will rotate slowly during the barcode reading and pre-wetting phase.
10. During the coffee preparation phase, coffee will start to flow. The green light will rotate quickly during brewing. A steady GREEN light indicates that coffee brewing is ready.
11. To stop the coffee flow early, push the button. A steady GREEN light indicates that coffee brewing is ready.
12. To manually top off your coffee, push the button and push again to stop when the desired volume is reached.
13. To eject the capsule, open the machine head by pushing the lever upwards. The machine head will open automatically with an electrical mechanism.

ENERGY SAVING CONCEPT

The machine can be turned ‘OFF’ at any time, by closing the machine head and then pushing the lever down for 3 seconds. Automatic” OFF”

Mode
The machine will turn off automatically after 9 minutes of non-use.

PROGRAMMING THE WATER VOLUME

1. The programming is specific to each capsule size, Alto, Mug, Gran Lungo, Double Espresso, or Espresso. Cup sizes can be reprogrammed from 10 ml to 500 ml.
2. Open the machine head by pressing the lever upwards; Insert the capsule blend you want to program; Close the head by pushing the lever down.
3. Push and hold the button until the desired volume is reached.
4. The water volume level is now stored for the capsule size used for the programming.

SPECIAL FUNCTIONS

CLEANING

CAUTION
Do not use any strong or abrasive cleaning agent or solvent cleaner. Do not put in a dishwasher. Never immerse the appliance or part of it in water. Clean the coffee outlet regularly with a damp cloth. Please use only clean cloths for cleaning the machine.

1. Rinse and clean the water tank and lid before filling it with fresh drinking water. Place the water tank in place.
2. Rinse the cup support. Place a container of at least 0.5 l under the coffee outlet.
3. Open the machine head by pushing the lever up, let the used capsule be ejected, then close the machine. Empty and rinse the capsule container.
4. Push the button 3 times in 2 seconds to start the cleaning cycle. An orange light will blink during the cycle. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 5 minutes. The procedure consists of 3 cycles of pumping water in, internal cleaning, and water flowing from the outlet to complete.
5. The procedure can be stopped at any time by pushing the button. The button will go to steady GREEN light when ready for brewing. To restart the cleaning process, follow the instructions starting at point 4. To brew a coffee, insert a capsule, push the lever down to close the machine, and push the button.

RESET TO FACTORY SETTINGS

NOTE
Choose a Special Function by pressing the lever down: 1 time for “Descaling”. 2 times for “Emptying the system”. 3 times for “Reset to factory settings”.

1. Turn the machine “OFF” by pushing the lever down for 3 seconds.
2. To enter “Factory settings” mode, push the button and the lever down at the same time for 3 seconds. ORANGE steady light indicates entry into the Special Functions menu.
3. Choose a function by pressing the lever down: – 3 times for “Reset to factory settings”
4. Push the button to confirm. ORANGE light will blink 3 times in 3 seconds to confirm the reset is done and then go to steady GREEN. The machine is now ready to use.

EMPTYING THE SYSTEM
BEFORE A PERIOD OF NON-USE, FOR FROST PROTECTION, OR BEFORE A REPAIR.

1. Empty the water tank and put it in place.
2. Open the machine head and let the used capsule be ejected. Close the machine. Empty the capsule container.
3. Turn the machine “OFF” by pushing the lever down for 3 seconds.
4. Place a container under the coffee outlet. To enter “Emptying the system” mode push the button and the lever down at the same time for 3 seconds. ORANGE steady light indicates entry into the Special Functions menu.
5. Choose a function by pressing the lever down – 2 times for “Emptying the system”.
6. Push the buŽon. The ORANGE light will blink during the entire procedure. The machine turns “OFF” automatically when the machine is empty.

TROUBLESHOOTING

DISPOSAL AND ENVIRONMENTAL PROTECTION

This appliance complies also with the Directive 2012/19/EU. Packaging materials and appliances contain recyclable materials. Your appliance contains valuable materials that can be recovered or can be recycled. Separation of the remaining waste materials into different types facilitates the recycling of valuable raw materials. Leave the appliance at a collection point. You can obtain information on disposal from your local authorities. To learn more about Nespresso’s sustainability strategy, go to Nespresso

LIMITED WARRANTY

Nespresso guarantees this product against defects in materials and workmanship for 3 years. The guarantee period begins on the date of purchase and Nespresso requires the presentation of the original proof of purchase to ascertain the date. During the guarantee period, Nespresso will either repair or replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be warranted only for the unexpired portion of the original guarantee or six months, whichever is greater.

This limited guarantee does not apply to any defect resulting from negligence, accident, misuse, or any other reason beyond Nespresso’s reasonable control, including but not limited to normal wear and tear, negligence or failure to follow the product instructions, improper or inadequate maintenance, calcium deposits or descaling, connection to improper power supply, unauthorized product modification or repair, use for commercial purposes, fire, lightning, flood or other external causes.

This guarantee is valid only in the country of purchase or in other countries where Nespresso sells or services the same model with identical technical specifications. Guarantee service outside the country of purchase is limited to the terms and conditions of the corresponding guarantee in the country of service. Should the cost of repairs or replacement not be covered by this guarantee, Nespresso will advise the owner and the cost shall be charged to the owner.

Save for losses that cannot be limited or excluded as a matter of law, performance by Nespresso of the obligations imposed on Nespresso herein shall be the full extent of Nespresso’s liability under this guarantee. Except to the extent allowed by applicable law, the terms of this limited guarantee do not exclude, restrict, or modify the mandatory statutory rights applicable to the sale of this product and are in addition to those rights. If you believe your product is defective, contact Nespresso for instructions on how to proceed with a repair.

Please visit our website at www.nespresso.com for contact details. UK & ROI. Should your machine have a genuine manufacturing fault, you must return it to the retailer within 28 days of purchase. Outside of 28 days, please contact Nespresso on 0800 442 442. Your machine is guaranteed for 3 years for parts and labor from purchase. To take advantage of this guarantee, you must present your proof of purchase.

This guarantee excludes damage resulting from a fall or impact, incorrect handling not in compliance with the instructions for use, insufficient Nonaffercare or cleaning, external events (fire, flood, etc.), and, commercial use (including small offices). Under no circumstances shall the application of this guarantee give rise to the complete replacement of the machine or entitle the consumer to damages.

The guarantee period commences from the date of purchase and will not be extended due to any claims made during this period. This warranty is valid only in the country of purchase or in other countries where Nespresso sells or services the same model with identical technical specifications.

For more Manuals by Nespresso, visit ManualsDock

FAQS About Nespresso Vertuo Plus