Nedis KAWD300FBK Hot Water Dispenser User Manual

Nedis KAWD300FBK Hot Water Dispenser

Hot Water Dispenser

For more information see the extended manual online:  ned. is/kawd300fbk

Intended use
The Nedis KAWD300FBK is a hot water dispenser for instant boiling water. The product is intended for indoor use only. The product is not intended for professional use. Any modification of the product may have consequences for safety, warranty, and proper functioning. This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as shops, offices other similar working environments, farmhouses, by clients in hotels, motels, and other residential type environments, and or in bed and breakfast type environments.

This product can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

Specifications

Main parts

1. Reset hole
2. LCD
3. Spout
4. Drip plate
5. Drip tray
6. Top lid
7. Water tank
8. Water level indicator
9. Power cable
10. Drainage stopper
11. Bottom cover
12. Reset key
13. Filter (optional)
14. Filter box
15. Temperature indicator
16. Volume indicator
17. Water temperature for milk
18. Setting the temperature manually
19. Touchscreen control lock
20. Descale indicator
21. Lack of water indicator
22. Water temperature for coffee or tea
23. Custom dispense volume
24. On  off button

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Unplug the product from the power source and other equipment if problems occur.
• Do not use the product to heat anything other than water.
• Do not use the product if the surface is cracked.
• Place the product on a stable and flat surface.
• Ensure no water enters the power outlet.
• Connect to a grounded outlet only.
• Do not unplug the charger by pulling on the cable. Always grasp the plug  and pull
• Do not let the power cable touch hot surfaces.
• Do not expose the product to direct sunlight, naked flames, or heat.
• Never immerse the product in water or place it in a dishwasher.
• Do not remove the top lid while the brewing cycle is in progress.
• Unplug the product when not in use and before cleaning.
• Unplug the product from the power source before service and when replacing parts.
• Children of less than 8 years should be kept away unless continuously supervised.
• Usage by children should be supervised at all times.
• This product is not a toy. Never allow children or pets to play with this product.
• Do not move the product during operation.
• The temperature of accessible surfaces may be high when the product is operating.
• Do not touch the hot parts of the product directly.
• Do not fill the water tank below the “min” indicator.
• Do not fill the water tank above the “max” indicator.

Before first use

1. Clean the product with a damp cloth.
2. Place the product on a stable and flat surface.
3. Connect the power cable A9 to a power outlet.
4. When you first use this product, perform two full cycles to clean the inside of the product.

Filling the water tank

1. Remove the top lid A6 from the water tank A7.
2. Fill A7 to the “max” on the water level indicator A8.
3. Do not fill the water tank above the “max” on A8.
4. Do not fill the water tank below the “min” on A8.
5. Do not spill any water on the product.
6. Place A6 back on A7.

Tapping hot water

1. Do not remove A6 while hot water is dispensed.
2. Place a glass under the spout A3.
3. Select the preferred temperature and volume settings.
4. Tap the on-off button, Ag.
5. Hot water flows from A3 until the set volume has been dispensed.
6. Press Ag to manually stop the cycle.

Emptying the drip plate

1. Place one hand on A6 to stabilize the product.
2. Lift the drip tray A5 with the other hand.
3. Remove the drip plate A4.
4. Empty A5.
5. Place A4 back on A5.
6. Place A5 back on the product.

Touchscreen controls

Replacing the filter

1. Remove A6.
2. Take out the filter box including the filter Ar.
3. Clean the new AR you want to use Immerse the filter vertically for 15 minutes.
4. Rinse the filter under water for 15-20 seconds.
5. Place the new Ar into At.
6. Place At into A7 on the original filter place of the product.

Recalibrating the volume and temperature

1. Place a water container underneath A3.
2. Tap and hold Ao for 3 seconds.
3. Ay shows “AUT”.
4. Au shows “000”.
5. Tap Ag.

The machine recalibrates the volume and temperature. During the process, water is dispensed through A3. After 4-5 minutes the machine automatically exits the calibration mode.

Resetting the product

• Place the reset key Ae into the reset hole A1.
• The machine automatically exits the reset mode.

Descaling the product

1. Remove A6.
2. Fill A7 with 1000 ml of white vinegar.
3. Add water to the max.
4. Place A6 back on A7.
5. Tap and hold Af for 3 seconds.
6. Remove A6.
7. Fill A7 with clean water to the max.
8. Place 6 back on A7.
9. Tap and hold Af for 3 seconds.
10. Repeat steps 6 – 9 until the odor of vinegar has been flushed away.

Display error codes

FOR MORE MANUALS BY NEDIS, VISIT MANUALSDOCK

FAQS About Nedis KAWD300FBK Hot Water Dispenser