JIMMY JV85 Cordless Stick Vacuum Cleaner Instruction Manual

JIMMY JV85 Cordless Stick Vacuum Cleaner

Products Installation

Unpacking
Open the package, take out the foam pad, all accessories, and machine from the package, take off the plastic bag, and save them for future maintenance and repair.

Parts Name

1. Switch button
2. Power button
3. Metal tube release button
4. Floor head release button
5. Battery pack release button
6. LED screen
7. Dust cup release latch
8. Charger
9. Charging holder
10. 2-in-1 crevice tool
11. 2-in-1 upholstery tool
12. Electric mattress head
13. Carpet bbrush rollPacking List

 

Main-body Assembly

Assemble the electric floorhead and metal tube
Hold the floor head with the left hand, use the right hand to insert the metal tube vertically into the floor head, align it with the conductive needle, and press the handle until a “click” sound is heard.

Attention
Keep the handle and floor head in the same direction, conductive needle shall align with the socket. When packing, storing, or cleaning, if the electric floorhead needs to be removed, press the brush release button as shown in the picture and pull the electric floorhead in the direction shown in the picture.

Assemble battery pack and handheld vacuum Cleaner
Assembly of battery pack: hold the hand-held vacuum cleaner in one hand, hold the battery pack in the other hand, aim at the guiding groove on the body, slide in the battery pack according to the arrow direction shown in the picture, and then pull the battery pack after installation to make sure it does not get loose.

Attention
when the vacuum cleaner is long idled, please remove the battery, pack the machine, and store it in a cool and dry place, avoid direct sunlight or humid environment.

Assemble metal tube and handheld vacuum
First, assemble the floorhead and metal tube according to the method of assembling the electric floorhead and metal tube. Assemble the floorhead, metal tube, and handheld vacuum cleaner: as shown by the arrow, align the conductive needle of the metal tube with the coupler of the suction nozzle, and push up until a“click” sound is heard.

Assembly of accessories
For the convenience of use, this product is specially equipped with some accessories for the hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner, you can directly connect the accessories according to your needs.

Connect the electric mattress head、2-in-1 crevice tool、2-in-1 upholstery tool to a handheld vacuum as in the picture.

Use of Vacuum

Attention
When using the product for the first time, the battery power is not full. Need to charge the vacuum before using it.

Charging holder assembly
Assembly method one: Put the vacuum cleaner in the holder, and lean the vacuum cleaner against the wall, place the holder in a position that the vacuum cleaner’s floorhead does not touch the ground. Take off the handheld vacuum cleaner, follow Fig to place the expansion pipe on the wall, and follow Fig to place the holder to the expansion pipe position, and lock in the screw. After assembly is completed, put the vacuum in the charger holder to charge or store.

Attention
Do not fix the holder to the bathroom or another humid wall.

Charging of vacuum cleaner
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in time; When the voltage is too low, to protect the battery, the vacuum cleaner will be automatically powered off, at this time the vacuum cleaner needs to be charged. When charging, plug the charger connector into the A/C power socket, and hang the handheld vacuum cleaner on the holder to start charging. When the handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum cleaner is charging. When charging is completed, the LED display shows 100% power. After charging, please pull the charger plug off the power socket and stop charging.

Attention
if the power cord is damaged, to avoid danger, it must be replaced by a professional person of the manufacturer, repairing agent, or similar department.

Use of Handheld Vacuum Cleaner
Take the vacuum cleaner off the holder, and press the switch button on the handle to start or stop the vacuum cleaner. When the machine is turned on, it works in normal power mode, press the power button to switch to turbo or max power mode.

Use of Electric Floor Head
Clean hard floor, tile, or carpet with the electric floorhead. Carpet brush roll can be replaced to the floorhead to clean long hair carpet.

Note
what is the rolling brush blocking protection?

During the operation of the electric floorhead, if there is a large volume of foreign matter inhaled or too much fiber wound, or even a child in the play of the machine mistakenly puts his hand into the nozzle, resulting in the brush roll abnormal stop, the electric floorhead will stop working, to protect personal safety and brush motor.

Use of accessories

2-in-1 crevice tool
suitable for cleaning crevice, door or window corners, and other narrow gaps.

2-in-1 upholstery tool
suitable for cleaning closet, windowsill, sofa, and table surface.

Electric mattress head
Suitable for sofa and mattress. The brush roll beats and then cleans the dust mites and allergens from the deep sofa or bed.

Cleaning and Replacing Parts

NOTES

1. HEPA filters are available for sale from local vacuum cleaner distributors.
2. It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary. Electric floorhead brush rollmight be entangled with hair after a long time of use. It needs to be cleaned in time to keep the vacuum working more efficiently.

Clean dust cup and filtration system

1. Press down the dust cup bottom cover, open the dust cup, and dump dust into the trash can.
2. Hold the HEPA lid and rotate it anti-clockwise, remove the HEPA assembly from the handheld vacuum for cleaning.
3. Hold the top of the cyclone assembly and rotate it anti-clockwise, remove the cyclone assembly from the handheld vacuum for cleaning.
4. If HEPA needs wash, hold the HEPA and rotate it clockwise, remove it from the HEPA lid for washing. HEPA needs to be completely dry before reuse.
5. After cleaning, assemble the parts back in the opposite sequence of disassembly.

Clean brush roll

1. Move the brush roll release button along the arrow direction and remove the side cover.
2. Remove one end of the brush roll and take it out from the nozzle for cleaning.
3. After cleaning or replacing the brush roll, assemble it back in the opposite sequence of disassembly.

Battery pack disassembly
Press the battery release button, remove the battery pack in the arrow direction and place the battery in a plastic bag, then store it in a dry place.

Storage of main body
When the vacuum is long idled, remove the battery, pack the machine, and store it in a cool and dry place, do not put it in direct sunlight or a humid environment.

Safety Notes

• This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.
• Please read this instruction manual carefully before use, and properly save, and store it for future use.
• Do not put the vacuum close to a fire or other high-temperature facility.
• Do not use or store the machine under extremely bad conditions, for example, extreme temperatures. It is recommended to use it indoors between the temperature of 5 °C to 40 °C.
• Store the machine in a dry place and avoid direct sunlight.
• Fully charge the battery before first use or after long storage.
• Before using the vacuum, make sure the brush roll is assembled, otherwise, it may lead to motor fan blockage, causing motor burnout.
• Please do not use the vacuum to pick up detergent, oil, glass slag, needles, cigarette ash, wet dust, water, matches, etc.
• Please do not use the vacuum to pick up tiny particles such as cement, gypsum powder, wall powder, or large objects such as paper balls, otherwise, it will cause malfunctions such as blockage and motor burnout.
• Avoid blockage to air inlet or brush roll, it may cause motor failure.
• Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.
  If the brush roll is not working, please check whether the brush roll is entangled with hair or other long fiber,
• and clean it in time.
• When storing the machine for a long time, ensure that the battery is fully charged before storage and charge the machine at least every three months.
• Unplug the charger to clean or repair the machine. Hold the charger when plugging or unplugging it, and do not pull the charging cord.
• Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, and lacquer thinner will cause cracks or color fading and cannot be used.
• If the machine is not working after fully charged, it must be checked and repaired in our designated office, please do not dismantle the machine on your own.
• When discarding the machine, please press the button to release the battery pack, take out the battery pack, and make sure the machine is disconnected with power and handled properly. Do not throw into fire, water, or soil.
• If the battery liquid leakage touches your skin or clothes, wash it with water, if there is any discomfort, please go to the hospital immediately.
• Do not use a non-original battery pack, avoiding machine damage and safety problems.
• Avoid using the vacuum cleaner to pick up easily blockable things such as plastic bags, candy paper, and big scraps of paper, which might affect the function, and even cause the failure to work. Please clean the foreign matter on the floor head in time, then it will work normally. The discarded battery pack shall be recycled safely, do not throw it away casually.

Trouble Shooting

Please check the following issues before sending them to designated repair offices.

Attention
If any other failures occur, which need professional tools, to avoid danger, the machine must be repaired or replaced by the manufacturer, other maintenance offices, or professionals from similar offices.

Product Specification

Technical Parameter

Circuit Diagram

Warranty Information

This product enjoys two years warranty from the date of purchase. Excluded from the guarantee are normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, and damage, that can be attributed to external circumstances or caused by the batteries.

For more Manuals by JIMMY, visit MANUALSDOCK

FAQS About JIMMY JV85 Cordless Stick Vacuum Cleaner