JIMMY H9 Flex Cordless Vacuum Cleaner Instruction Manual

JIMMY H9 Flex Cordless Vacuum Cleaner

Parts Name

1. Floor head release button
2. Flexible metal tube
3. Metal tube release button
4. On/off button
5. Switch button
6. Battery pack release button
7. LED screen
8. Dust cup release latch
9. Charger
10. Charging holder
11. Crevice tool
12. Upholstery tool
13. Electric mattress head
14. Connector
15. Soft brush
16. Stretch hose
17. Carpet brush roll

Packing List

Product Assembly

Assemble electric floor head with metal tube

Hold the floor head with the left hand, use the right hand to insert the metal tube vertically into the floor head, align it with the conductive needle, and press the handle until a “click” sound is heard.

Attention
Keep the handle and floor head in the same direction, conductive needle shall align with the socket. When packing, storing, or cleaning, if the electric floor head needs to be removed, press the brush release button as shown in the picture and pull the electric floor head in the direction shown in the picture.

Assemble battery pack and handheld vacuum Cleaner

Assembly of battery pack: hold the handheld vacuum cleaner in one hand, hold the battery pack in the other hand, aim at the guiding groove on the body, and slide in the battery pack according to the arrow direction shown in the picture. Pull the battery pack after installation to make sure it does not get loose.

Attention
when the vacuum cleaner is long idled, please remove the battery, pack the product, and store it in a cool and dry place, avoiding direct sunlight or a humid environment.

Assemble metal tube and handheld vacuum
First, assemble the floor head and metal tube according to the method of assembling the electric floor head and metal tube.

Assemble the floor head with metal tube assembly and handheld vacuum cleaner: as shown in the picture, align the conductive needle of the metal tube with the coupler of the suction nozzle, and push up until a “click” sound is heard.

Assembly of accessories
For convenience, this product is specially equipped with some accessories for the hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner alone, you can directly connect the accessories according to your needs or connect the accessories through the stretch hose

Connect the electric mattress head, crevice tool, upholstery tool, and dusting brush to the handheld vacuum as in the picture.

Accessories Connection List

Use of Vacuum

Charging

Attention
When using the product for the first time, the battery power is not full. It would help if you charged the vacuum before using it.

Charging holder assembly

Put the vacuum cleaner in the holder, and lean the vacuum cleaner against the wall, place the holder in the position where the vacuum cleaner’s floor head does not touch the ground. Take off the handheld vacuum cleaner, place the expansion pipe on the wall and place the holder to the expansion pipe position, then lock in the screw. After assembly is completed, put the vacuum in the charger holder to charge or store.

Attention
Do not fix the holder to the bathroom or another humid wall.

Charging of vacuum cleaner
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in time; When the voltage is too low, to protect the battery, the vacuum cleaner will be automatically powered off, at this time the vacuum cleaner needs to be charged. When charging, plug the charger connector into the A/ C power socket, and hang the handheld vacuum cleaner on the holder to start charging. When the handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum cleaner is charging. When charging is completed, the LED display shows 100% power.

Attention
When battery power is below ≤20% if the product is working in Max mode, it will change to Eco mode automatically. When battery power runs off, the product will turn off automatically.

Attention
If the vacuum cleaner is long idled, charge the battery every three months to avoid battery failure.

After charging, please pull the charger plug off the power socket and stop charging.

Attention
if the power cord is damaged, to avoid danger, it must be replaced by the professional staff of the manufacturer, repairing agent, or similar department.

Use of handheld vacuum and LED screen contents
Take the vacuum cleaner off the storage holder, and press the on/off button to start or stop the vacuum cleaner. The mode button can adjust the working mode. When the machine is turned on, it works in Auto mode, press the mode button to switch to the sequence of Turbo- Max – Eco-Auto mode. During the mode switch the mode will be displayed on an LED screen. The Middle of the LED screen displays the product run time left in current mode. When the mode is changed, the left run time will also change accordingly.

When the product works in Max mode and battery power drops below 20%, to extend product run time, the product will automatically switch from Max to Eco mode. After the battery is charged to higher than 20% power, the product can work in Max mode. When the product is working in Auto mode, it will adjust working power based on the dust content and the floor type it detects, to achieve higher cleaning efficiency. Under Auto mode, the LED screen displays Auto regardless of how high the working power is.

The product is equipped with a dust content sensor. On the LED screen bottom, there is a light strip to display the dust content. As dust content decreases from high to low, the red color decreases, and the blue color increases. When the strip is completely blue, the cleaning surface is clean. The Cleanness of the cleaning surface can be visually displayed through the LED screen.

Use of Flexible Metal Tube

The flexible metal tube has two modes: vertical and bending. The vertical mode is equivalent to the normal metal tube. The bending mode can be used for cleaning under the table bottom, bed bottom, etc. When the bending mode is needed, press the bending button as shown in the g picture, and the metal tube can achieve a 0-90°bending angle.

Use of electric floor head
The electric floor head is suitable for cleaning all kinds of floors like hard floors, tile, carpet, etc. The product comes with an extra carpet brush roll that can be replaced to the floor head to deep clean the carpet.

Attention
During the operation of the electric floor head, if there is a large volume of foreign matter inhaled or too much fiber wound, or even a child in the play of the machine mistakenly puts his hand into the nozzle, resulting in the brush roll abnormal stop, the electric floor head will stop working, to protect personal safety and brush motor.

Use of accessories

Crevice tool
suitable for cleaning crevices, door or window corners, and other narrow gaps.

Upholstery tool
suitable for cleaning closet, windowsill, sofa, and table surface.

Soft brush
suitable for cleaning easy-to-scratch furniture like bookshelves, handicrafts, etc.

Stretch hose
suitable for connecting with other tools to clean hard-to-reach areas.

Electric mattress head
Suitable for sofa and bed mattresses. The brush roll beats out and then cleans the dust mites and allergens from the deep sofa or bed.

Connector
Can be connected to other tools and bent to different angles to clean dust on top of high cabinets or dust on the roof.

Cleaning and Replacing Parts

Attention

1. HEPA filters are available for sale from local vacuum cleaner distributors.
2. It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary.
3. Electric floor head brush roll might be entangled with hair after a long time of use. It needs to be cleaned in time to keep the vacuum working more efficiently.

Clean dust cup and filtration system
When the dust cup is full or HEPA is clogged, the LED screen will display the HEPA icon as the picture to remind us to clean the dust cup and filter it. Please clean the dust cup and HEPA filter in time. Replace the HEPA filter if necessary.

Steps of cleaning dust cup and filtration system:

1. Press down the dust cup bottom cover, open the dust cup, and dump dust into the trash can.
2. Hold the HEPA lid and rotate it anti-clockwise, remove the HEPA assembly from the handheld vacuum for cleaning.
3. Hold the top of the cyclone assembly and rotate it anti-clockwise, remove the cyclone assembly from the handheld vacuum for cleaning.
4. If HEPA needs washing, hold the HEPA and rotate it clockwise, remove it from the HEPA lid for washing. HEPA needs to be completely dry before reuse.
5. After cleaning, assemble the parts back in the opposite sequence of disassembly.

Clean brush roll

1. Move the brush roll release button along the arrow direction and remove the side cover.
2. Remove one end of the brush roll and take it out from the nozzle for cleaning.
3. After cleaning or replacing brush roll, assemble it back in the opposite sequence of disassembly

Storage of Vacuum Cleaner

Battery pack disassembly

Press the battery release button, remove the battery pack in the arrow direction and place the battery in a plastic bag, then store it in a dry place.

Storage of vacuum cleaner
When the vacuum is long idled, remove the battery, pack the product, and store it in a cool and dry place, do not put it in direct sunlight or a humid environment.

Safety Notes

• This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.
• Please read this instruction manual carefully before use, properly save, and store it for future use.
• Do not put the vacuum close to a fire or other high-temperature facility.
• Do not use or store the machine under extremely bad conditions, for example, extreme temperature. It is recommended to use it indoors between the temperature of 5 °C to 40 °C.
• Store the machine in a dry place and avoid direct sunlight.
• Fully charge the battery before first use or after long storage.
• Before using the vacuum, make sure brush roll is assembled, otherwise, it may lead to motor fan blockage, causing motor burnout.
• Please do not use the vacuum to pick up detergent, oil, glass slag, needles, cigarette ash, wet dust, water, matches, etc.
• Please do not use the vacuum to pick up tiny particles such as cement, gypsum powder, wall powder, or large objects such as paper balls, otherwise, it will cause malfunctions such as blockage and motor burnout.
• Avoid blockage to air inlet or brush roll, it may cause motor failure.
• Do not put your hand or foot into the floorhead inlet to avoid body hurt.
• Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.
• If the brush roll is not working, please check whether the brush roll is entangled with hair or other long fiber, and clean it in time.
• When storing the machine for a long time, ensure that the battery is fully charged before storage and charge the machine at least every three months.
• Unplug the charger to clean or repair the machine. Hold the charger when plugging or unplugging it, and do not pull the charging cord.
• Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, and lacquer thinner will cause cracks or color fading and cannot be used.
• If the machine is not working after fully charged, it must be checked and repaired in our designated office, please do not dismantle the machine on your own.
• The discarded machine contains batteries. They should be recycled safely. Do not discard them randomly.
• If there is damage to the power cord, to avoid danger, it should be replaced or repaired by the manufacturer、repairing agency, or a professional person.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• The appliance is only to be used with the power supply unit provided.

Trouble Shooting

Please check the following issues before sending them to the designated repair agent.

When there is an electric component defect,  that needs a professional after-service person for instruction or repair, the LED screen will display the defect warning with an error code F1 to F8. Please contact after service of the local agent and provide the error code.

Defect of F1 to F8 is as following:

Attention
if there are other faults need special tools, to avoid danger, and must be repaired by a professional people manufacturer, repairing agent, or similar agent.

Technical Parameter

Circuit Diagram

Warranty Information

This product enjoys two years warranty from the date of purchase. Excluded from the guarantee are normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, and damage that can be attributed to external circumstances.

For more Manuals by JIMMY, visit MANUALSDOCK

FAQS About JIMMY H9 Flex Cordless Vacuum Cleaner