JIMMY H8 Pro Cordless Stick Vacuum Cleaner Instruction Manual

JIMMY H8 Pro Cordless Stick Vacuum Cleaner

Products Installation

Unpacking
Open the package, take out the foam pad, all accessories, and machine from the package, take off the plastic bag, and save them for future maintenance and repair.

Parts Name

1. Mode button
2. On/off but
3. Dust cup release button
4. .Metal tube release button
5.  Metal tube
6. Floorhead release button
7. Electric Floorhead
8. LED screen
9. HEPA holder
10. Charger
11. Charging stand
12. 2-in-1 upholstery tool
13. 2-in-1 crevice tool
14. Electric mattress head
15. Soft brush
16. Connector
17. Stretch hose
18. Battery charging holder

Packing List

Product assembly and disassembly

Assemble the electric floorhead and metal tube
When connecting, hold the electric floorhead with your left hand in the direction shown, use your right hand to insert the metal tube vertically into the floorhead, align it with the conductive needle, and press the handle until a “click” sound is heard. (Fig 1)

Attention
Keep the handle and floor head in the same direction, conductive needle shall align with the socket. When packing, storing, or cleaning, if the electric floorhead needs to be removed, press the brush release button as shown in the picture and pull the electric floorhead in the direction shown in the picture. (Fig 2)

Assemble the battery pack and handheld vacuum cleaner
Assembly of battery pack: hold the hand-held vacuum cleaner in one hand, hold the battery pack in the other hand, aim at the guiding groove on the body, slide in the battery pack according to the arrow direction shown in the picture, and then pull the battery pack after installation to make sure it does not get loose. (Fig3)

Attention
when the vacuum cleaner is long idled, please remove the battery, pack the machine, and store it in a cool and dry place, avoid direct sunlight or humid environment.

Assemble metal tube and handheld vacuum
First, assemble the floorhead and metal tube according to the method of assembling the electric floorhead and metal tube. (Fig 4)

Assemble the floorhead, metal tube, and handheld vacuum cleaner
As shown by the arrow, align the conductive needle of the metal tube with the coupler of the suction nozzle, and push up until a“click” sound is heard.(Fig5)

Assemble the charging stand
Assembly sequence: Insert stand into stand base as ①, insert charger bracket into stand as ②. After assembly, the stand is like ③. Please the vacuum cleaner to bracket. (Fig 6)

Assembly of accessories
For the convenience of use, this product is specially equipped with some accessories for the handheld part of the vacuum cleaner. When you use the handheld vacuum cleaner alone, you can directly connect the accessories according to your needs or connect the accessories through the stretch hose.

Assemble accessories to handheld vacuum cleaner
Align the electric mattress head connector with a handheld vacuum, and insert into the end as in the picture. (Fig 7) Attn: The handheld vacuum can be connected with 2-in-1 upholstery, a 2-in-1 crevice tool, and a soft brush as an electric mattress head.

Assemble accessories to handheld vacuum cleaner
Align the vacuum cleaner with the stretch hose, and insert it until it is fully tightened. Connect the stretch hose with 2-in-1 upholstery tool: insert the 2-in-1 upholstery tool into the stretch hose until it is fully tightened. (Fig 8)

Attn
A 2-in-1 crevice tool and soft brush can be connected to a stretch hose as a 2-in-1 upholstery tool.

Connect the handheld vacuum cleaner with accessories through the connector
After connecting the handheld vacuum cleaner to the metal tube, the metal tube can connect with 2-in-1 crevice tool through the connector. Insert one end of the connector into a metal tube until it is fully tightened, and then insert a 2-in-1 crevice tool into another end of the connector. (Fig 9)

Attn

1. The 2-in-1 upholstery tool and dusting brush can be connected to a connector as a 2-in-1 crevice tool.
2. The connector can be directly connected to the handheld vacuum cleaner.

Accessories Connection List

Use of the product

Attn

1. When using the product for the first time, the battery power is not full. Need to charge the vacuum before using it.
2. When battery capacity is lower than 20%, the machine will automatically change to Eco mode, and cannot run in max mode.

Charging
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in time; When the voltage is too low, to protect the battery, the vacuum cleaner will be automatically powered off, at this time the vacuum cleaner needs to be charged. When charging, assemble the battery pack to the machine, plug the charger connector into the A/C power socket, and another end to the vacuum cleaner to start charging. When the handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum cleaner is charging. When charging is completed, the LED display shows 100% power. (Fig 10)

Attn

1. After charging, please pull the charger plug off the power socket and stop charging.
2. If power cord is damaged, to avoid danger, it must be replaced by a professional people of the manufacturer, repairing agent, or similar department.

Use of Handheld Vacuum Cleaner
Take the vacuum cleaner off the holder, and press the on/off button on the handle to start or stop the vacuum cleaner. When the machine is turned on, it works in Auto mode, press the power button to switch to Turbo mode, press again to switch to Max mode, and again to switch to Eco mode. The vacuum cleaner’s working mode switches in the sequence of Auto, Turbo, Max, and Eco modes by pressing the mode button. (Fig 11)

Vacuum cleaner working mode:

Auto Mode
Adjusts power automatically according to different floor types, suitable for all types of floors.

Turbo Mode
Suitable for short hair carpet

Max Mode
Suitable for long hair carpet

Eco Mode
Suitable for hard floors like wooden floors, tiles, etc.

Use of Electric Floor Head
Electric floorhead can be used to clean short hair carpet, hard floors, or tile. (Fig 12 13)

Attn
During the operation of the electric floorhead, if there is a large volume of foreign matter inhaled or too much fiber wound, or even a child in the play of the machine mistakenly puts his hand into the nozzle, resulting in the brush roll abnormal stop, the electric floorhead will stop working, in order to protect personal safety and brush motor.

Use of accessories

2-in-1 crevice tool
suitable for cleaning crevices, door or window corners, and other narrow gaps. (Fig 14)

2-in-1 upholstery tool
suitable for cleaning closets, windowsills, sofas, and table surfaces.( Fig 15)

Soft brush
suitable for cleaning easy-to-scratch furniture like bookshelves, handicrafts, etc. (Fig 16)

Stretch hose
the stretch hose is suitable for cleaning hard-to-reach areas. (Fig 17)

Electric mattress head
Suitable for sofa and mattress. The brush roll beats and then cleans the dust mite and allergens from the deep sofa or bed. (Fig 18)

Connector
Can be connected to other tools and bent to different angles to clean the dust on top of high cabinets or dust on the roof. (Fig 19)

Cleaning and Maintainance

Clean dust cup and filter

1. Press the dust cup cover release button to open the dust cup cover.
2. Dump the dust into the trash can from the dust cup bottom. ( Fig 20)
3. Rotate the HEPA holder to lift HEPA from the vacuum cleaner. Cyclones can also be removed from vacuum cleaners for cleaning in the same way. (Fig 21)
4. Rotate HEPA holder to take off HEPA for cleaning.HEPA needs to completely dry before reuse.
5. After cleaning and drying the HEPA (Replace HEPA if necessary). (Fig 22)

Clean brush roll
Move the brush roll release button along the arrow direction to remove the side cover. (Fig 23)

Remove one end of the brush roll and take it out from the nozzle for cleaning. After cleaning or replacing brush roll, assemble it back in the opposite sequence of disassembly.

Clean floorhead air path

1.  Push the two buttons to remove the floorhead air path cover. (Fig 25).
2. Hold the floorhead air path with a finger and pull it out to clean.
3.  After cleaning, assemble in opposite sequence of disassembly.

When the vacuum is long idled, need to remove the battery. Press the battery release button, remove the battery pack in the arrow direction, and place the battery in a plastic bag, then store it in a cool and dry place, do not put it in direct sunlight or a humid environment. (Fig 26)

Safety Notes

• This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.
• Please read this instruction manual carefully before use, properly save, and store it for future use.
• Do not put the vacuum close to a fire or other high-temperature facility.
• Do not use or store the machine under extremely bad conditions, for example, extreme temperature. It is recommended to use it indoors between the temperature of 5 °C to 40 °C.
• Store the machine in a dry place and avoid direct sunlight.
• Fully charge the battery before first use or after long storage.
• Before using the vacuum, make sure brush roll is assembled, otherwise, it may lead to motor fan blockage, causing motor burnout.
• Please do not use the vacuum to pick up detergent, oil, glass slag, needles, cigarette ash, wet dust, water, matches, etc.
• Please do not use the vacuum to pick up tiny particles such as cement, gypsum powder, wall powder, or large objects such as paper balls, otherwise, it will cause malfunctions such as blockage and motor burnout.
• Avoid blockage to air inlet or brush roll, it may cause motor failure.
• Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.
• If the brush roll is not working, please check whether the brush roll is entangled with hair or other long fiber, and clean it in time.
• When storing the machine for a long time, ensure that the battery is fully charged before storage and charge the machine at least every three months.
• Unplug the charger to clean or repair the machine. Hold the charger when plugging or unplugging it, and do not pull the charging cord.
• Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, and lacquer thinner will cause cracks or color fading and cannot be used.
• If the machine is not working after fully charged, it must be checked and repaired in our designated office, please do not dismantle the machine on your own.
• When discarding the machine, please press the button to release the battery pack, take out the battery pack, and make sure the machine is disconnected with power and handled properly. Do not throw into fire, water, or soil.
• If the battery liquid leakage touches your skin or clothes, wash it with water, if there is any discomfort, please go to the hospital immediately.
• Do not use a non-original battery pack, avoiding machine damage and safety problems.
• Avoid using the vacuum cleaner to pick up easily blockable things such as plastic bags, candy paper, and big scraps of paper, which might affect the function, and even cause the failure of working. Please clean the foreign matter on the floor head in time, then it will work normally. The discarded battery pack shall be recycled safely, do not throw it away casually.

Trouble Shooting

Please check the following issues before sending them to designated repair offices.

Attention
If any other failures occur, which need professional tools, to avoid danger, the machine must be repaired or replaced by the manufacturer, other maintenance offices, or professionals from similar offices.

Product Specification

Technical Parameter

Circuit Diagram

Warranty Information

This product enjoys a two-year warranty from the date of purchase. Excluded from the guarantee are normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, and damage that can be attributed to external circumstances or caused by the batteries.

For more Manuals by JIMMY, visit MANUALSDOCK

FAQS About JIMMY H8 Pro Cordless Stick Vacuum Cleaner