JIMMY H10 Pro Cordless Handheld Vacuum Cleaner Instruction Manual

JIMMY H10 Pro Cordless Handheld Vacuum Cleaner

Parts Name

1. Battery pack release button
2. 0n/off switch
3. Mode button
4. Dust cup bottom release button
5. LCD screen
6. Metal tube release button
7. Floorhead release button.
8. Metal tube bending release button I
9. Storage holder
10. Charger
11. Connector|
12. Upholstery tool
13. Crevice tool
14. Soft brush
15. Electric mattress head
16. Carpet brush roll
17. Stretch hose

Storage holder parts name

1. Front cover assembly
2. Metal tube upper
3. Metal tube upper sleeve
4. Accessories holder
5. Metal tube lower
6. Base assembly
7. Screw*8

Accessories storage holder assembly

1. Put base on the floor, insert metal tube lower into the base, and fasten 2pcs screw.
2. Insert accessories holder into top of metal tube lower, put metal tube upper and metal tube upper sleeve assembly into accessories holder, fasten 4pcs screw as the picture.
3. Put the front cover assembly into the metal tube upper and fasten the 2pcs screw as in the picture.

Packing List

Machine assembly

Assemble and disassemble the electric floor head with a flexible metal tube  Hold the floor head with the left hand, use the right hand to insert the metal tube vertically into the floor head, align it with the conductive needle, and press the tub until a “click” sound is heard. Attention: Keep the handle and floor head in the same direction, conductive needle shall align with the socket.

When packing, storing, or cleaning, if the electric floor head needs to be removed, press the brush release button and pull the metal tube in the direction shown in the picture to take out the floor head.

Assemble battery pack with handheld vacuum

Hold the battery pack, align it with the guiding slot on the handheld vacuum body, and slide in the battery pack in the arrow direction in the picture. Then pull the battery pack after installation to make sure it does not get loose. Attention: when the vacuum cleaner is long idled, please remove the battery, pack the machine, and store it in a cool and dry place, avoid direct sunlight or a humid environment.

Assemble floor head and metal tube assembly with hand-held vacuum
First, assemble the floor head and metal tube according to the method of assembling the electric floor head with the metal tube.  Then, as shown by the arrow, align the conductive needle of the metal tube with the coupler of the handheld vacuum suction nozzle, and push the metal tube upward until a“click” sound is heard.

Assembly of accessories

For convenience, this product is specially equipped with some accessories for the hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner alone,  you can directly connect the accessories according to your needs or connect the accessories through the stretch hose.

Accessories Connection List

Use of vacuum cleaner

Charging Attention:

1. When using the product for the first time, the battery power is not full. It would help if you charged the vacuum before using it.
2. If the power cord is damaged, to avoid danger, it must be replaced by a professional person of the manufacturer, repairing agent, or similar department.

The product can be charged in two ways:

1. Charge the battery pack separately: Plug one end of the charger to the battery pack connector and another end of the charger to a power socket to charge the battery directly. In this way when undercharging the indicator on the side of the battery pack is red and turns green when charging is completed.
2. Charge the battery on the machine: lug one end of the charger to the battery pack connector and another end of the charger to a power socket to charge the battery when the battery pack is assembled in the vacuum cleaner. The machine’s LCD screen will show the battery power percentage. When charging is completed it will show 100% as the pictures show.

Attention:

1. When battery power is below ≤20%, the machine will have voice reminding. If the machine is working in Max mode in this status, it will change to Eco mode automatically. When the battery power runs off, the machine will turn off after the LCD screen and voice reminders.
2. If the vacuum cleaner is long idled, charge the battery every three months to avoid battery failure.

Use of handheld vacuum and LCD screen

contents
Take the vacuum cleaner off the storage holder, and press the on/off button to start or stop the vacuum cleaner. The mode button can adjust the working mode. When the machine is turned on, it works in Auto mode, press the mode button to switch to the sequence of Turbo- Max – Eco-Auto mode.

During the mode switch, the mode will be displayed on the LCD screen and there is a voice reminder. The Middle of the LCD screen displays the product run time left in current mode. When the mode is changed, the eft run time will also change accordingly.

When the product works in Max mode and battery power drops below 20%, to extend product run time, the product will automatically switch from Max to Eco mode. After the battery is charged to higher than 20% power, the product can work in Max mode.

When the product is working in Auto mode, it will adjust working power based on the dust content and the floor type it detects, to achieve higher cleaning efficiency. Under Auto mode, the LCD screen displays Auto regardless of how high the working power is. Combination brush roll Carpet brushrollBending button The product is equipped with a dust content sensor.

On the LCD screen bottom, there are 4 round light circles to display the dust content of 4 kinds of particles with a diameter of 10μm-60μm/60μm180μm/180-500μm/>500μm respectively. The circles for different dust particle sizes are in four different colors: red, yellow, blue, and green. As dust content decreases from high to low, the color fills in the circles accordingly. The cleanness of the cleaning surface can be visually displayed through an LCD screen.

Use of flexible metal tube
The flexible metal tube has two modes: vertical and bending. The vertical mode is equivalent to the normal metal tube. The bending mode can be used for cleaning under the sofa, table bed, etc. Press the release button when the bending mode is needed, and the metal tube can achieve a 0-90°bending angle.

Use of electric floor head
The electric floor head is suitable for cleaning all kinds of hard floors, tiles, carpets, etc. The product comes with an extra carpet brush roll that can be replaced to the floor head to deep clean the carpet. Attention:

During the operation of the electric floor head, if there is a large volume of foreign matter inhaled or too much fiber wound, or even a child in the play of the machine mistakenly puts his hand into the nozzle, resulting in the brush roll abnormal stop, the electric floor head will stop working, to protect personal safety and brush motor.

Use of accessories
Crevice tool: suitable for cleaning crevices, door or window corners, and other narrow gaps. Upholstery tool: suitable for cleaning closet, windowsill, sofa, and table surface.Soft brush: suitable for cleaning easy-to-scratch furniture like a bookshelf, handicrafts, etc.

Stretch hose: suitable for connecting with other tools to clean hard-to-reach areas. Electric mattress head: Suitable for sofa and bed mattresses. The brush roll beats out and then cleans the dust mites and allergens from the deep sofa or bed. Connector: This can be connected to other tools and bent to different angles to clean dust on top of high cabinets or dust on the roof.

Cleaning and Replacing Parts

Attention:

1. HEPA filters are available for sale from local vacuum cleaner distributors.
2. It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary.
3. Electric floor head brush roll might be entangled with hair after a long time of use. It needs to be cleaned in time to keep the vacuum working more efficiently.

Clean dust cups and filters

1. Press down the dust cup bottom cover to open the dust cup bottom cover.
2. Dump dust into the trash can.
3. Hold the dust cup lid and rotate it anti-clockwise, remove the cyclone assembly from the dust cup for cleaning.
4. Rotate the cyclone anti-clockwise, and disassemble the cyclone to clean.
5. Hold the HEPA lid and rotate it anti-clockwise,  remove the HEPA assembly from the top cover, and then rotate the HEPA lid to remove HPEA from the lid for cleaning.
6. If HEPA needs washing, hold the HEPA and rotate it clockwise, remove it from the HEPA lid for washing. HEPA needs to be completely dry before reuse.
7. After cleaning, assemble the parts back in the opposite sequence of disassembly.

Clean brush roll

1. Move the brush roll release button along the arrow direction and remove the side cover.
2. Remove one end of the brush roll and take it out from the nozzle for cleaning.
3. After cleaning or replacing the brush roll, assemble it back in the opposite sequence of disassembly.

Safety Notes

This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes. Please read this instruction manual carefully before use, properly save, and store it for future use. Do not put the vacuum close to a fire or other high-temperature facility. Do not use or store the machine under extremely bad conditions, for example, extreme temperatures.

It is recommended to use it indoors between the temperature of 5 °C to 40 °C. Store the machine in a dry place and avoid direct sunlight. Fully charge the battery before first use or after long storage. Before using the vacuum, make sure the brush roll is assembled, otherwise, it may lead to motor fan blockage, causing motor burnout. Please do not use the vacuum to pick up detergent, oil, glass slag, needles, cigarette ash, wet dust, water, matches, etc.

Please do not use the vacuum to pick up tiny particles such as cement, gypsum powder, wall powder, or large objects such as paper balls, otherwise, it will cause malfunctions such as blockage and motor burnout. Avoid blockage to air inlet or brush roll, it may cause motor failure. Do not put your hand or foot into the floorhead inlet to avoid body hurt. Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.

If the brush roll is not working, please check whether the brush roll is entangled with hair or other long fiber, and clean it in time. When storing the machine for a long time, ensure that the battery is fully charged before storage and charge the machine at least every three months. Unplug the charger to clean or repair the machine. Hold the charger when plugging or unplugging it, and do not pull the charging cord. Use a dry cloth to clean the machine.

Liquids like gasoline, alcohol, and land lacquer thinner will cause cracks or colcolording and cannot be used. If the machine is not working after fully charged, it must be checked and repaired in our designated office, please do not dismantle the machine on your own.

The discarded machine contains batteries. They should be recycled safely. Do not discard them randomly. If there is damage to the power cord, to avoid danger, it should be replaced or repaired by the manufacturer、repairing agency, or a professional person.

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. The appliance is only to be used with the power supply unit provided.

Troubleshooting

Please check the following issues before sending them to the designated repair agent.

Defect of F1 to F8 is as following:

Attention:
If any other failures occur, which need professional tools, to avoid danger, the machine must be repaired or replaced by the manufacturer, other maintenance offices, or professionals from similar offices.

Technical specification

Circuit Diagram

Manufacturer Information

Disposal
The machine, accessories, and packaging should be sorted for environmentally friendly recycling. Do not dispose of the machine into household waste!

Only for EC countries:
According to the European Guideline 2012/19/EU, machines that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.

Battery packs/batteries:
Integrated batteries may only be removed for disposal by qualified personnel. Opening the housing shell can damage or destroy the machine. Do not dispose of battery packs/batteries into household waste, fire, or water. Battery packs/batteries should, if possible, be discharged, collected, recycled, or disposed of in an environmentally friendly manner. Subject to change without notice.

Warranty Information

This product enjoys two years warranty from the date of purchase. Excluded from the guarantee are normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, and damage that can be attributed to external circumstances.

Press the battery release button, pull the battery pack out backward and place the battery in a plastic bag, then store it in a dry place.

FOR MORE MANUALS BY JIMMY, VISIT MANUALSDOCK

FAQS About JIMMY H10 Pro Cordless Handheld Vacuum Cleaner