Jimi IoT VL103 LTE Vehicle Terminal Tracker User Manual

Jimi IoT VL103 LTE Vehicle Terminal Tracker

About Jimi Lo T

For many years, Jimi loT has been firmly established in location-based software and hardware solutions. Our primary hardware consists of smart terminals for field workers, cars, e-scooters, assets, and cargo, among other things. Additionally, we have platforms in place to manage hardware (AMS), connections (CMP), and accesses to the loT Hub.

In terms of technology, product quality, and financial gains, we lead the competition and have an advantage over comparable products globally. Our unwavering pursuit of growth, active promotion of innovation, and optimistic approach to every issue are all part of our unwavering commitment to generating long-term benefits for society.

Product Overview

• Real-time tracking
• Driving behavior analysis (4 types)
• Serial port (optional)
• Over-speed alert
• SOS alert
• Tamper alert
• Removal alert
• Power-supply-cut alert
• Low power alert
• Vibration alert
• Geo-fence

Standard Part List

• Item Quantity
• VL103 1
• Power cable (Length:1m) 1
• Relay Optional
• Panic button Optional

Specification

• Network 4G & 2G
• Frequency VL103D (L):
• Location accuracy <10 meters CEP
• Relay Optional
• TTFF (open sky) Avg. hot start≤1sec
• Indication GPS (Blue), Cellular (Green), Power (Red)
• Battery 270 mAh, 3.7V Li-Polymer battery
• Operating voltage 9-90VDC
• Operating temperature –20 ℃ to +70 ℃
• Device weight 55 g
• Device dimension 92 mm*40 mm*20 mm

Product Setup

1. Prepare a micro SIM card that supports the same network as this device.
2. Remove the shell of the device.
3. Insert the SIM card into the slot and toggle the switch to ON.

LED Indication

Power Status (Red)

• On for 0.3s and off for 0.3s Low power
• On for 1s and off for 3s Fully charged
• On for 0.1s and off for 3s Working normally
• Solid on Charging (Higher priority than the status of low power)
• Off Battery is exhausted/Internal failure

GNSS Status (Blue)

• On for 0.3s and off for 0.3s Searching GNSS signal
• Solid on Positioned
• Off GNSS module is in sleep mode or not working

Cellular Status (Green)

• On for 0.3s and off for 0.3s Network initializing
• On for 1s and off for 3s Receiving signal normally
• On for 0.1s and off for 3s Network connected
• Solid on Calling
• Off No signal received/No SIM card detected

Interfaces

8 Pin Standard Version

Interface Color Description

• V+ Red Power + (9-90V)
• V- Black Power – Ground pin
• ACC Orange Vehicle ignition detection
• Relay Yellow Cut-off vehicle fuel supply
• SOS+ White SOS Trigger Pin
• SOS- Black SOS Ground Pin
• Data A Blue RS485
• Date B Green RS485

Wiring of Standard Version

Tips for finding the t wires:

1. Use the Usetimeter to find out the positive and negative sides of the battery: No matter when they is switched to ON or OFF, the correct battery voltage can be shown in the multimeter.
2. The way to find the C wire: Connect the multimeter’s black probe to the negative side, and connect the red probe to a random wire, at this moment, the voltage shown in the multimeter is 0V; turn the key to ON, if the supply voltage is shown, that’s the correct ACC wire.
3. Connect the two connectors, if the vehicle has no connector, please connect the device’s wires to the corresponding vehicle wires.

Installation recommendation

Please install the device under the guidance of professional personnel. Note:

1. The device should face up to the sky.
2. Meta the dermal barrier barrier layer, whilayerse always installed on the windshield, may affect the signal, please avoid installing the device under these objects.

Platform & APP

1. Login service platform Please log the design to the service platform to set up and operate the device.
2. Download APP Please download and install the APP on the designated website, APP store, or Google Play store.

SMS Commands

Troubleshooting

Warranty instructions

1. The warranty is valid only when the warranty card is properly completed and upon presentation of the proof of purchase consisting of the original invoice indicating the date of purchase, model, and serial No.of the product. We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer.
2. Our obligations are limited to repair of the defect or replacement of the defective part or at its discretion replacement of the product itself.
3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service center.
4. Repair or replacement under the terms of this warranty does not provide the right to extension or renewal of the warranty period.
5. The warranty does not apply to cases other than defects in material, design, and workmanship.

Maintenance Record

Output power

• GSM 900MHz: 29dBm(MAX) , GSM 1800MHz: 26 dBm(MAX)

Declaration of Conformity Hereby, Shenzhen Jimi loT Co., Ltd declares that the radio equipment type JM-VL103 complies with Directive 2014/53/EU., and this product is allowed to be used in all EU member states.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if it uses fainter Renceuctions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

I suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the event circumference from an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should billed with a distance of 20 cm between the radiator and your body.

FAQs About Jimi IoT VL103 LTE Vehicle Terminal

For more Manuals by Jimi IoT, Visit Manualsdock