iOttie Velox Pro MagSafe with CryoFlow Mount Charger
CryoFlow Cooling System
Device Compatibility
Velox products are designed for use with MagSafe compatible iPhones and MagSafe-compatible cases. Compatible devices include the iPhone series 12 and later.
Product Specifications
Power Adapter Specifications
Installation
Attaching the Dash Mount
Choose an installation method: dashboard/flat surface (A) or windshield (B).
Option A
Dashboard or Flat Surface Installation Choose a flat area on the vehicle’s dashboard and wipe any dust or debris from the surface.
- Peel off the film on the dashboard pad and evenly press it onto the desired installation location. Â Wait at least 20 minutes before attaching the mount.
- Remove the plastic cover from the suction cup and firmly press the mount on the dashboard pad.
- Push down the locking lever to engage suction.
The dashboard pad is mounted with semi-permanent adhesive tape. Once removed, it cannot be re-mounted. When mounting, it is recommended that the surface and product be above 65°F. When removing the dashboard pad, please use caution. We recommend removing slowly from the edge to avoid damage.
Windshield Installation
Choose a location on the windshield and wipe any dust or debris from the surface.
- Peel off the protective film on the suction cup and press firmly onto the windshield.
- Push down the locking lever to engage suction.
To reuse the suction cup,
simply rinse under warm water and let air dry to restore tacky suction.
Connecting to Power
Attach the USB-C cable to the Velox Pro. Then, connect the cable to your vehicle’s USB-C port or auxiliary power outlet via the included 18W adapter.
The Velox Pro does not have an on/off switch. Â Once the cable is plugged in and the vehicle is turned on, the mount will stay on.
Adjusting the Mount
The Velox Pro will arrive in the closed position. To extend the telescopic arm, simply pull it outwards. When adjusting the arm for the first time, you may need to use extra force to loosen the internal lubricant. The telescopic arm extends from 4–7″ and pivots on a 260° arc. To raise and lower the arm, loosen the pivot knob. After adjusting, tighten the knob to secure the arm. You can also adjust the angle of the mounting face by tilting or rotating it.
Mounting Your Phone
Peel off the protective film on the magnetic mounting face. Then simply tap your phone against the mount and the magnets will hold it in place. Charging will begin automatically.
Using the CryoFlow Technology
Once your phone is attached to the Velox Pro Mount, the CryoFlow technology will automatically turn on and begin cooling. You are now ready to start driving.
FOR MORE MANUALS BY IOTTIE, VISIT MANUALSDOCK
FAQS About iOttie Velox Pro MagSafe with CryoFlow Mount Charger
What is the iOttie Velox Pro MagSafe with CryoFlow Mount Charger?
The iOttie Velox Pro MagSafe with CryoFlow Mount Charger is a car mount and wireless charger designed to securely hold your iPhone using MagSafe technology while also providing fast wireless charging.
How does it work?
The charger utilizes MagSafe technology to securely attach your iPhone to the mount, and it also features fast wireless charging capabilities.
Is it compatible with all iPhone models?
The iOttie Velox Pro MagSafe with CryoFlow Mount Charger is designed specifically for iPhone models that support MagSafe technology, such as the iPhone 12 series and later models.
Does it work with MagSafe cases?
Yes, the charger is compatible with MagSafe cases, ensuring that your iPhone can still attach securely even with a case on.
What is CryoFlow technology?
CryoFlow technology refers to the cooling system integrated into the charger, which helps to regulate temperature during wireless charging to prevent overheating and maintain optimal charging efficiency.
Can it be used with other devices besides iPhones?
While it’s primarily designed for iPhones with MagSafe compatibility, the charger may also work with other Qi-enabled devices, although it may not provide the same level of magnetic attachment.
Does it come with a car mount?
Yes, the iOttie Velox Pro MagSafe with CryoFlow Mount Charger includes a car mount, allowing you to securely attach it to your car’s dashboard or windshield for convenient use while driving.
How fast does it charge?
The charger supports fast wireless charging up to 15W for compatible iPhone models, providing quick and efficient charging while on the go.
Is it easy to install in the car?
Yes, the car mount is designed for easy installation and can be securely attached to your car’s dashboard or windshield using adhesive or suction cup mounts, depending on the model.
Does it come with a warranty?
iOttie typically provides a warranty for their products, but the specifics may vary. It’s recommended to check the warranty information provided by the manufacturer or retailer at the time of purchase.