Graco Pack N Play On The Go Playard Installation Manual

Graco Pack N Play On The Go Playard

About Graco

Graco is a company that specializes in the manufacturing and distribution of fluid handling systems and equipment. Founded in 1926, Graco has established itself as a global leader in providing innovative solutions for various industries, including automotive, construction, manufacturing, and many others.

Fluid handling products manufactured by Graco are designed to efficiently transfer, measure, and control the flow of liquids and other materials. The company offers a wide range of equipment, such as pumps, meters, valves, sprayers, and dispensing systems, which are used in applications such as lubrication, painting, sealing, bonding, and coating.

Graco’s products are known for their reliability, durability, and advanced technology. The company focuses on developing cutting-edge solutions that enhance productivity, reduce waste, and improve the overall performance of its customers’ operations.

Instructions

Setting Up the Playard

• THIS PRODUCT REQUIRES ADULT ASSEMBLY.
• Keep fingers clear of top corners during setup. Be sure the playard is completely set up before use. Check that the four top rails are completely latched, the center of the floor is pushed down, the mattress pad is flat, and the straps are securely fastened to the bottom of the unit. Always follow the instructions in the owner’s manual to set up the playard.
• Never use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh. Check before assembly and periodically during use. Contact Graco at 1-800-345-4109 for replacement parts and instructions if needed. Never substitute parts.

Using the playard

• The playard is for playing or sleeping. When used for playing, never leave the child unattended, and always keep the child in view. When used for sleeping, you must still provide the supervision necessary for the continued safety of your child.
• Always keep the playard away from hazards in the area that may injure your child.
• When a child is able to pull to a standing position, remove large toys and other objects that could serve as steps for climbing out.
• Stop using this product when your child reaches 35 inches (89 cm) in height, weighs more than 30 lb (14 kg), or is able to climb out.
• Do not modify the playard or add any attachments that are not listed in the owner’s manual, including an add-on bassinet.
• Children can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine a child in a playard.
• NEVER leave a child in a product with the side lowered. Be sure the side is in raised and locked position child is in the product.

Parts list

This model may not include some features shown below. Check that you have all the parts for this model BEFORE assembling your product. If any parts are missing, call Customer Service at 1-800-345-4109. No tools are required.

ALL MODELS

• Playard Frame
• Mattress Pad
• Carry Bag
• Storage Bag

Playard Setup

Playard Frame Mattress Pad

1. Disconnect straps holding mattress pad around playard. Remove the mattress pad from around the playard.
2. Pull up on the side rails in the middle above and push the button until all four sides are locked. DO NOT push the center down yet.
3. When setting up, lock rails BEFORE lowering the center. Be sure the top rails have become rigid. If not, pull them up again until they are rigid. If the top rails do not latch, lift the center of the floor higher. CHECK that fabric covers the corners.
4. Hold one end of the unit up and push the center of the floor down until locked securely into place.
5. Always use a mattress pad soft side up.
6. Pull the four snap straps on the corners of the mattress pad through the bottom of the playard. Wrap around the tube and fasten and snap onto the tube. Repeat on all corners.

To Fold

1. Release snap straps on the bottom of the playard. Pull the mattress pad fully out of the playard.
2. DO NOT unlock the top rails yet. Pull the center of the playard floor up with the tab in the middle of the playard. The center of the floor must be halfway up before the top rails will unlock.
3. The center of the floor must be up.
   • Lift up slightly on the top rail.
   • Push the button located on the side of the top rail to release the two tubes.
   • Push down.
   • Repeat on all four rails until all tubes are released.
   • If top rails do not unlatch, DO NOT FORCE. Lift the center of the floor higher.
   • Both tubes must be released for the top rail to fold.
4. Do not force. If the unit will not fold, look for a partially latched top rail. Squeeze the latch button to release the rail.
5. Wrap mattress pad around playard and fasten straps.

To Cover

1. Cover the unit with the handle out.
2. Zip together.

Storage Bag

WARNING

• Always keep objects out of the child’s reach.
• Remove the bag when a child is able to pull himself up in the playard.
• NEVER use inside the unit. The child may use it as a step to climb out or reach items in the bag.
• TO AVOID SERIOUS INJURY, NEVER place sharp or pointed objects in a storage bag.

Care and Maintenance

• FROM TIME TO TIME CHECK YOUR PLAYARD for worn parts, torn material, or stitching. Replace or repair the parts as needed. Use only Graco® replacement parts.
• TO CLEAN PLAYARD, use only household soap or detergent and warm water. DO NOT SUBMERGE THE PLAYARD IN WATER.
• TO WASH CARRY BAG, machine wash in cold water on a delicate cycle and drip-dry. NO BLEACH.
• TO CLEAN MATTRESS, wipe clean with a damp cloth. NO BLEACH. DO NOT SUBMERGE THE MATTRESS PAD IN WATER.

Replacement Parts

To purchase parts or accessories or for warranty information in the United States, please contact us at the following:

www.gracobaby.com or 1-800-345-4109

Product Registration

To register your Graco product from within the U.S.A. visit us online at www.gracobaby.com/productregistration or return the registration card provided with your product. We currently do not accept product registrations from those living outside the United States of America.

Folding

1. Pull the tab up to unlock. Stop when you hear it click. (See page 10)
2. Lift the rail up slightly, press the button, and lower the rail. Repeat on all 4 sides. (See page 11)
3. Wrap the mattress pad around the playard. (See page 12)

Set-Up

1. Pull up on all 4 sides and snap into place. Do not push the center of Playard down until the top rails are locked. (See page 8)
2. Push the center of Playard down until you hear a click. (See page 9)

FAQs – Graco Pack N Play On The Go Playard Installation Manual

Pdf – Graco Pack N Play On The Go Playard Installation Manual

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/07/Graco-Pack-N-Play-On-The-Go-Playard.pdf” download=”all”]

For More Manuals Visit: ManualsDock

• Graco Premium Foam Crib & Toddler Mattress Installation Guide
• Graco ‎06710-400 Premium Foam Crib & Toddler Mattress User Guide
• Mattress Firm 600 Setup User Manual
• Mattress Firm 300 Setup User Manual