Welcome to ManualsDock! Read Millions of manuals for free.

Final E3000 in-Ear Headphones User Manual

Final FEATURED

Final LOGO

Table of Contents

Final E3000 in-Ear Headphones

Final E3000 in-Ear Headphones

Notes on Use

  • The way you position the earphones in your ear affects the sound quality. We recommend trying different positions by moving the earphones around while playing music.
  • This will allow you to find the position that generates your most preferred sound. Once you figure out your favorite position it will be easy to set that position each time.
  • The shapes of a person’s right ear and left ear are usually different. Therefore, the best position for each ear is usually different as well.
  • When removing the earphones from your ears, always hold the main unit first and then remove it. Pulling the cord could cause the wire to become disconnected.
  • Because the housing is made of metal, if you bring the earphones from a cold environment and the temperature rapidly changes, condensation could occur inside the housing. In such a case, leave it for a while until any condensation inside the unit evaporates, and then use the product.
  • Do not apply strong impacts to the earphones or put excess force on the cable. If the product fails or wires are broken due to abnormal use, the product warranty is invalidated.
  • Leaving the product in locations exposed to direct sunlight, high humidity, or a dusty environment could cause the product to fail.
  • If the product fails, do not attempt to disassemble it.
  • The earphone jack is for stereo reproduction only. If the earphone is connected to a monaural output jack, sound may not come out of one side.

Part Names

Final E3000 in-Ear Headphones 1

How to Mount the Ear Hooks
After attaching the ear hooks to the cables, insert the housings into each ear, hook the ear hooks over the ears, and adjust the fit.

  • Using the ear hooks makes for an even more stable fit, and also makes for a reduction in touch noise.

Maintenance

Gently remove any build-up from the mesh filter with the tip of a toothpick. Please take care to ensure that no foreign particles fall inside when doing so.

Warranty and after service
The warranty for this product is valid for 2 years from the day of purchase. During the warranty period, we will repair the product based on the provisions below. The warranty is only valid in the country in which the product was purchased. Please contact the store you purchased the product from regarding questions about repairs. For products purchased outside your country of residence and for support after the warranty period, please contact us using the Contact Form on our website.

  1. During the warranty period, we will repair the product free of charge if the product fails even though it was used by the instructions in the User’s Manual and the Warning and Caution sections.
  2. In the following cases, repairs to the product will be subject to a fee even during the warranty period:
  3. The necessary documentation noted in the warranty card is not complete.
  4. The earphones were subjected to a strong impact or were allowed to get wet. Product failure or broken wires resulting from an excessive use of force on the cables.
  5. Failure of the product or damage caused as a result of fire, earthquake, storm or flood damage, lightning strike, or other natural disaster.
  6. Repair of scratches on the surface of the housing or repair of the housing itself.

Contacting us
Please contact us regarding inquiries using the Contact Form on our website:  www.snext-final.com

List of items in the package
Main unit / Earpieces / Ear hooks / Pouch

Specifications

Final E3000 in-Ear Headphones 2

FOR MORE MANUALS BY FINAL, VISIT MANUALSDOCK

Leave a Comment