BELLA 2 Slice Toaster
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock do not immerse cords, plugs, or appliances in water or other liquid.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest store for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- To disconnect, press the CANCEL button, then remove the plug from the wall outlet.
- Do not use the appliance for other than intended use.
- Oversize foods, metal foil packages, or utensils must not be inserted in a Toaster as they may involve a risk of fire or electric shock.
- A fire may occur if Toasters are covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Countertop use only
ADDITIONAL IMPORTANT SAFEGUARDS
CAUTION HOT SURFACES
This appliance generates heat and escaping steam during use. Proper precautions must be taken to prevent the risk of burns, fires, or other injury to persons or property damage.
- A person who has not read and understood all operating, toasting, and safety Instructions is not qualified to operate this appliance. All users of this appliance must read and understand this Instruction Manual before operating or cleaning this appliance.
- If this appliance falls or accidentally becomes immersed in water, unplug it from the wall outlet immediately. Do not reach into the water!
- When using this appliance, provide adequate air space above and on all sides for air circulation. Do not operate this appliance while it is touching or near curtains, wall coverings, clothing, dishtowels, or other flammable materials.
- To reduce the risk of fire, do not leave this appliance unattended during use.
- If this appliance begins to malfunction during use, press the CANCEL button and unplug the cord. Do not use or attempt to repair a malfunctioning appliance!
- The cord to this appliance should only be plugged directly into a 120 V AC electrical wall outlet.
- Do not use this appliance in an unstable position.
- Use the Toaster on a hard, flat surface. Do not place it near a flame or heat or on a soft surface (such as carpet). Avoid placing it where it may tip over during use. Dropping the Toaster could cause it to malfunction.
- Do not operate unattended
- When heating toaster pastries, always use the lightest toast color setting.
CAUTION
- DO NOT toast pastries with runny fillings or frosting.
- DO NOT toast torn slices of bread.
- DO NOT place buttered bread or wrapped food into the Toaster.
- DO NOT toast small-size breads, mini-baguettes, breadsticks, etc.
Notes on the Plug
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Notes on the Cord
The provided short power-supply cord (or detachable power-supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Always plug directly into a wall outlet/receptacle.
- A short power-supply cord (or detached power-supply cord) is provided to reduce the risk of becoming entangled in or tripping over a long cord.
- Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
- If a long detachable power-supply cord or extension cord is used:
- The marked electrical rating of the cord set, or extension cord should be at least as great as the electrical rating of the appliance.
- The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and
- If the appliance is of the grounded type, the cord set or extension cord should be a grounding-type 3-wire cord.
Electric Power
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.
Getting To Know Your 2 slice Toaster
Product may vary slightly from illustrations.
Before Using For The First Time
There may be manufacturing residue or oil remaining in the toaster or heating element, which might emit an odor at the time of the first use. This is normal and will not occur after several uses. It is suggested to operate the toaster without bread for first use according to the below steps. Then let the toaster cool down before you start toasting the first slice.
How To Use The Toaster
- Ensure the toaster is connected to the main power supply.
- Place one to two slices of bread into the toasting slots and press the loading lever down until it latches. The toaster will heat up automatically and start toasting.
NOTE
The toaster must be connected to the main power supply for the bread carriage to engage and for the toasting cycle to begin
Adjust the browning control to brown the toast to your desired taste. To stop toasting press the CANCEL button at any time. The loading lever will rise automatically when toasting is finished. This toaster is equipped with a high lift lever to help with the removal of smaller items. If the toast is not dark enough, you can toast the bread again. Adjust the browning control to your desired setting and replace the toast. Ensure the toast does not burn while re-toasting.
Browning Control
The browning control enables adjustment of toasting time and has the following settings:
- Reheat – for warming pre-toasted bread
- 1-2 for light toasting
- 3-4 for medium toasting
- 5-6 for dark toasting for warming pre-toasted bread
- 1-2 for light toasting
- 3-4 for medium toasting
- 5-6 for dark toasting
BAGEL FUNCTION
The bagel setting works great for English muffins too!
- Place one half in each toasting slot with the cut sides facing the center.
- Set the browning control to the desired setting.
- Press the loading lever down.
- Press the BAGEL button. The bagel indicator will light up. Ensure the bagel doesn’t burn.
- The loading lever will rise automatically when the toasting cycle is complete.
REHEAT FUNCTION
Your toaster can reheat bread if it has cooled too quickly.
- Replace the bread in the toaster.
- Set the browning dial to the lowest setting. The arrow on the dial should be positioned to REHEAT.
- Press the loading lever down.
- The loading lever will rise automatically when the toasting cycle is complete.
GLUTEN-FREE FUNCTION
Use your Toaster to toast, reheat, or defrost your Gluten-free bread, bagels, and waffles. Gluten-free breads are often denser in quality and require a longer toasting time. The gluten free function adjusts and adds the ideal amount of time to your toasting cycle to ensure precise and even toasting.
Note
The gluten-free function does not remove the gluten from your bread.
- Place one bread, bagel, or waffle in each toasting slot.
- Set the browning control to the desired setting.
- Press the loading lever down.
- Press the GLUTEN FREE button to toast. The Gluten-free button will light up. Ensure toast/ bagel/ waffle doesn’t burn.
- The loading lever will rise automatically when the toasting cycle is complete.
FROZEN FUNCTION
Your Toaster can defrost bread and toast it in a single cycle.
- Place the frozen bread in the toaster.
- Set the browning control to the desired shade setting.
- Press the loading lever down.
- Press the FROZEN button. The defrost indicator will light up.
- The loading lever will rise automatically when the toasting cycle is complete.
CANCEL FUNCTION
The CANCEL button can be pressed at any time during toasting to interrupt the toasting cycle.
CAUTION
- Remove all protective wrapping before using the toaster.
- If the toaster starts to smoke, press CANCEL to stop toasting immediately.
- Do not toast food with runny ingredients.
- Never attempt to remove bread jammed in the slots without first unplugging the toaster from the electrical outlet. Be sure not to damage the internal mechanism or heating elements when removing bread.
- The bread slot is to be used for toasting regular bread slices only. Do not use the toaster to toast irregularly shaped bread as it may become lodged in the toaster.
HIGH LIFT LEVER
Allows the loading lever to be raised further for easier access to smaller breads. This ensures smaller pieces of bread and bagels can be removed easily.
CLEANING AND MAINTENANCE
- Disconnect the toaster from the outlet before cleaning.
- Wipe the outside with a soft dry cloth after the toaster cools down. Never use metal polish.
- Pull out the crumb tray on the bottom of the toaster and empty it. If the toaster is used frequently, accumulated bread crumbs should be removed at least once a week. Make sure the crumb tray is inserted correctly into the toaster and completely closed before using the toaster again.
- The power cord may be wound under the bottom of the toaster when not in use or for storage.
- This appliance requires little maintenance. Do not try to repair it yourself. Any servicing requiring disassembly must be performed by a qualified appliance repair technician.
Limited TWO-YEAR Warranty
SENSIO Inc. hereby warrants that for TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days concerning non-mechanical parts. At its sole discretion, SENSIO Inc. will either repair or replace the product found to be defective or issue a refund on the product during the warranty period.
The warranty is only valid for the original retail purchaser from the date of the initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.
EXCLUSIONS
The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel. Also, the warranty does not cover Acts of God such as fire, floods, hurricanes, or tornadoes. SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty.
Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province, and/or jurisdiction.
HOW TO OBTAIN WARRANTY SERVICE
You must contact Customer Service at our toll-free number: 1-866-832-4843. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to SENSIO Inc.
Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc. shall bear no responsibility or liability for the returned product while in transit to SENSIO Inc.’s Customer Service Center.
For more Manuals by BELLA, visit MANUALSDOCK