Beats Solo3 Wireless Headphones
About Beats
Beats is a brand of high-end headphones and earphones that are known for their sleek design, superior audio quality, and active noise-cancellation features. The brand was founded by Dr. Dre and Jimmy Iovine in 2006, and it quickly became a popular choice among music enthusiasts and professionals. Beats Studio headphones are characterized by their iconic over-ear design, which provides excellent sound isolation and comfort for extended listening sessions. They are available in a range of colors and materials, including premium leather and brushed metal finishes.
Overview
Set up and use your Solo3 Wireless headphones
Learn how to charge, pair, use, and reset your Beats Solo 3 Wireless Headphones.
Turn on and charge your headphones
To turn your headphones on or off, press and hold the power button for 1 second.
To charge your headphones, plug them into a power source using the included micro USB cable. As the headphones charge, the Fuel Gauge lights flash. When charging is complete, all five lights will remain lit.
To check the Fuel Gauge, which shows the battery level and charging status, press and release the power button.
Your headphones provide up to 40 hours of playback from 2 hours of charging, and up to 3 hours of playback from a 5-minute charge.
To conserve battery or use your headphones when the battery is depleted, plug in the RemoteTalk cable to use your headphones in wired mode.
Pair your headphones
Learn how to pair your headphones with your device.
Pair with an iPhone that uses iOS 10 or later
If you have an iPhone that uses iOS 10 or later, follow these steps:
- Hold your headphones next to your unlocked iPhone.
- Press the power button on your headphones for 1 second.
- After a few seconds, your iPhone asks you to connect. If it doesn’t, press the power button on your headphones for 5 seconds.
- Follow the instructions on your iPhone.
When you set up your headphones in this way, they set up automatically with your other devices that are signed in to iCloud and using iOS 10 or later, macOS Sierra or later, or watchOS 3 or later.
Your headphones are kept up to date automatically when you set them up with an iPhone that uses iOS 10 or later. If your headphones aren’t paired with an iPhone that uses iOS 10 or later, you can use Beats Updater to update your firmware.
Pair with a Mac or another device that uses Bluetooth
If you have some other Bluetooth device, follow these steps to pair your headphones with that device:
- Press the power button for 5 seconds. When the Fuel Gauge flashes, your headphones are discoverable.
- Go to Bluetooth settings on your device. For example, on your Mac, choose Apple () menu > System Preferences, then click Bluetooth. Make sure that Bluetooth is turned on.
- Select your headphones from the list of discovered Bluetooth devices.
Pair with an Android device
If you have an Android device, follow these steps:
- Get the Beats app for Android.
- Press the power button for 5 seconds. When the Fuel Gauge flashes, your headphones are discoverable.
- Select Connect on your Android device.
Use your headphones
Learn how to play music, change the volume, and answer calls.
Play Music
To play music, use the “b” button on the left earcup, or use the center button on the RemoteTalk cable in wired mode.
- To pause or play a track, press once.
- To skip to the next track, press twice. To skip backward, press three times.
- To scan forward through a track, press twice and hold on the second press. To scan backward through a track, press three times and hold on to the third press.
Change the volume
To control playback volume, use the volume buttons on the left earcup or the RemoteTalk cable. To control call volume, use the volume controls on your phone.
- Press and release the volume up button, or press and hold to increase volume continuously.
- Press and release the volume down button, or press and hold to decrease volume continuously.
Answer calls
To answer phone calls, use the “b” button on the left earcup, or the center button on the RemoteTalk cable.
- To answer or end a call, press once.
- To answer a second incoming call and put the first call on hold, press once. When two calls are active, this switches between calls.
- To reject an incoming call, press and hold for 1 second.
- To stop listening through your headphones and send the call to the phone, press twice.
Hands-free controls
To activate Siri on your iOS device or the voice-command feature on another device, use the “b” button on the left earcup, or the center button on the RemoteTalk cable. Just press and hold until you hear a chime, then say what you need.
Reset Solo3 Wireless
- Hold down the volume down button and the power button for 10 seconds.
- When the Fuel Gauge flashes, release the buttons.
Your headphones are now reset and ready to be set up with your devices again.
Sound troubleshooting – Beats headphones and earphones
Snapping, crackling, popping, or no audio on one side
- Make sure the 3.5 mm audio jack is fully plugged in. The straight input connects to your headset, and the L-shaped input connects to your audio device.
- Check that your audio source is on and working.
- If your audio source is a computer or laptop, try adjusting the configuration settings.
- If you still hear distorted sound, try a different audio source and an alternate cable.
Volume too high
Turn the source volume down.
Phone not responding to button presses
Make sure that the headset plug is securely connected. For multi-press functions, vary the speed of presses when you use the remote/mic.
Compatibility issues
Remember to install the latest software updates on your device. The inline remote/mic may have limited functionality with devices that don’t run iOS.
The microphone does not pick up sound
- Make sure that the headset plug is securely connected and that the socket is clean and clear.
- Check that the microphone—located on the back of the remote—isn’t blocked or covered.
- Make sure the straight end of the plug is connected to the headphones and the angled L-shaped plug is connected to the audio source.
- If you’re using your Beats with a computer, make sure that your computer microphone is set to the correct input source.
FAQs Beats Solo3 Wireless Headphones
What are Beats Solo3 Wireless headphones?
Beats Solo3 Wireless headphones are on-ear Bluetooth headphones manufactured by Beats, a subsidiary of Apple Inc. They are part of the Beats Solo lineup and offer a wireless audio experience with seamless pairing and integration with Apple devices.
How do Beats Solo3 Wireless headphones connect to devices?
Beats Solo3 Wireless headphones use Bluetooth technology to connect to compatible devices. They can pair with smartphones, tablets, computers, and other Bluetooth-enabled devices for wireless audio streaming.
Do Beats Solo3 Wireless headphones have a wired option?
What is the battery life of Beats Solo3 Wireless headphones? A: Beats Solo3 Wireless headphones boast an impressive battery life of up to 40 hours on a single charge. This extended battery life is achieved through the efficient use of the Apple W1 chip and low-power Bluetooth technology.
How long does it take to charge the Beats Solo3 Wireless headphones fully?
The Beats Solo3 Wireless headphones have a “Fast Fuel” feature that provides up to 3 hours of playback with just a 5-minute charge. A full charge takes approximately 2 hours.
Do Beats Solo3 Wireless headphones have noise-canceling technology?
No, the Beats Solo3 Wireless headphones do not have active noise-canceling technology. They offer some passive noise isolation due to their on-ear design and padded ear cups, but they do not actively cancel out external noises like some other high-end headphones.
Are Beats Solo3 Wireless headphones sweat-resistant or waterproof?
The Beats Solo3 Wireless headphones are not specifically designed to be sweat-resistant or waterproof. While they can handle some light moisture, it is essential to avoid exposing them to excessive sweat or water to maintain their longevity.
Can I use Beats Solo3 Wireless headphones with Android devices?
Yes, Beats Solo3 Wireless headphones are compatible with Android devices and any other device that supports Bluetooth audio streaming. While they offer seamless integration with Apple devices through the W1 chip, they function as standard Bluetooth headphones with non-Apple devices.
Do Beats Solo3 Wireless headphones support hands-free calls?
Yes, the Beats Solo3 Wireless headphones have an integrated microphone that allows you to make and receive hands-free calls when connected to a smartphone or other compatible device.
Can I control music playback and volume on Beats Solo3 Wireless headphones?
Yes, the Beats Solo3 Wireless headphones have built-in controls on the ear cups, allowing you to adjust volume, play/pause music, skip tracks, and manage calls directly from the headphones without having to reach for your device.
Do Beats Solo3 Wireless headphones come with a carrying case?
Yes, the Beats Solo3 Wireless headphones usually come with a carrying case or pouch to protect them during travel and storage. The case helps keep the headphones safe from scratches and minor impacts.
I love these headphones! They are so lightweight and comfortable. I would definitely recommend them to anyone.