Anker Solix F3800 Portable Power Station User Guide

Anker Solix F3800 Portable Power Station

What’s in the Box

Overview

Product Overview

LCD Screen Guide

1. Remaining Battery for Power Station and Expansion Battery
2. Overload Warning This icon appears when a port is overloaded. The port will turn off to avoid any damage. Please remove the device causing overload.
3. Current Output Power
4. Current Input Power
5. Whole-Home Power Mode
6. USB-A Output Port
7. USB-C Output Port
8. Car Charging
9. IoT Press the IoT button for 2 seconds and connect your devices through the app when this icon appears on the screen.
10. AC Charge and Voltage Frequency
11. Electrical Vehicle Charging
12. Number of Expansion Battery Connected When the expansion battery is connected successfully, this icon appears on the screen.
13. Estimated Time to Fully Recharge
14. Estimated Time for Battery to Deplete
15. Low-Temperature Alert When this icon shows, stop using the power station until the icon disappears.
16. High-Temperature Alert When this icon shows, stop using the power station and let it cool down until the icon disappears.

Recharging Your Power Station

AC Recharging (1800W Max)
Recharge your power station by connecting to a wall outlet with the AC charging cable.

Solar Panel Recharging (2400W Max)
Recharge your power station with a maximum solar input of 2400W.

Car Recharging (120W)
Recharge your power station by connecting to a car’s output port with the car charging cable (not included).

Powering On / Of

Press the ON/OFF button for 3 seconds to turn your power station on or off. When the “Remaining Battery” indicator shows on the LCD screen, your power station is ready to charge devices.

• When powered on, press the DISPLAY button to turn the screen on or off.
• The auto-off time can be set in the Anker app.
• The power station will power off automatically if the output buttons are turned off and no power loads are detected for 12 hours. The standby duration can be set in the Anker app.

Powering Your Devices

AC Charging

• 120V AC Port
  Press the AC outlet button and connect your devices to the 5-20R output ports.

• 240V AC Port
  Double-press the AC outlet button, wait until the car icon appears on the screen, then connect your device to the L14-30R or 14-50 AC output port.

USB Charging
Connect your devices to the USB ports

Car Socket Charging
Turn on the car socket and connect your devices to start charging.

Uninterruptible Power Supply (UPS)

To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect your devices via the UPS AC output port

Connect With an Expansion Battery

Your power station can be connected with expansion batteries to increase the capacity up to 26880Wh. Please refer to the user manual of Anker SOLIX BP3800 Expansion Battery for detailed instructions.

Connect with Anker SOLIX Home Power Panel

Your power station can be connected with Anker SOLIX Home Power Panel to power your entire house. Please refer to the user manual of Anker SOLIX Home Power Panel for detailed instructions.

Anker App for Smart Control

You can remotely control your power station using the Anker app.

1. Download the Anker app from the App Store (iOS devices) or Google Play (Android devices), or by scanning the QR code.
2. Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your device off-grid.
3. Firmware update: You will be informed once a new firmware version is detected when you connect the power station to the app. During the update, ensure the power station is being charged and connected to Wi-Fi.

Light

Turn ON/OFF the light on the Anker App.

Carry Your Power Station

1. Lay the power station flat.
2. Open the bottom folding handle.
3. Grab the bottom and top handles to lift the power station

Specifications

For more Manuals by ANKER, visit MANUALSDOCK